News items February 2026

Innovative pneumatic dense phase conveying from Gericke The pneumatic conveying of bulk materials through pipes is a proven technology that offers numerous advantages over mechanical systems. These include flexible installation, low space requirements and minimal maintenance. However, conventional dilute phase systems reach their limits, especially when conveying highly abrasive glass fiber reinforced plastic pellets. In dilute phase conveying, the pellets are transported at high air speeds, which often leads to problems such as the formation of angel hair and severe wear on the pipe bends. Angel hair is caused by friction and heat build-up, which melts the plastic granules. Glass fiber-reinforced pellets with a proportion of 30 to 50 percent also mechanically wear down the pipe material and can lead to leaks. The solution is provided by Gericke’s PTA® pneumatic dense phase conveying system. Here, a pressure vessel is used as a feeding device, which doses the product into the pipeline and acts a gas-tight valve.

TMI and SSB introduce the Ilerpal L, a hybrid palletizing solution blending robotic precision with Cartesian efficiency. Designed for speeds up to 1,000 bags per hour, it delivers unmatched stability for irregular loads. Precision Engineering for Irregular Loads The hybrid palletizers from TMI and SSB combine the precision of robotics with the efficiency of Cartesian systems, supported by sideshifters. This combination offers a high degree of efficiency when stacking and overlapping irregular bags (e.g., open-end bags). The robot-controlled top gripper enables the bags to overlap, compensates for their irregular shape, and ensures an extremely stable pallet, even in complex configurations or demanding environments. Uncompromising Stability at Maximum Capacity Optimal finish at high production rates: Consistently precise layers and a flawless pallet appearance, even at maximum capacity. Load stability on the pallet: Each layer is precisely aligned, ensuring that pallets are stacked securely, stably, and safely for transport. This meticulous alignment minimizes product damage during logistics and enhances warehouse safety. Sustainable Versatility for Modern Production Flexible,

Looking for accurate, reliable material feeding, without overpaying for over-engineering? Meet Trantec’s True-Flow Screw Feeder range, designed for performance, priced for value. Built from the ground up to balance precision, simplicity, and affordability, True-Flow feeders are the smarter alternative to complex, overpriced systems. With just two moving parts, a contra-rotating agitator and auger screw, these feeders deliver exceptional durability, easy cleaning, and low-maintenance operation, even in demanding environments. Why Pay More? In-House Manufacturing Slashes Costs From precision-machined augers and custom seals to fabricated stainless-steel parts, Trantec manufactures and designs its components in-house at its UK facility. That means… * No third-party markups * No supply chain delays * No quality compromise This fully integrated, lean production process allows them to cut costs and pass the savings directly to you, without cutting corners. Ready-to-Ship Feeders Trantec are working towards making standardised models available off the shelf, reducing lead times and lowering costs even further. By standardising core

Goudsmit Magnetics utilizes Finite-Element Modelling (FEM) to improve the design and performance of magnetic systems, reducing development costs and enhancing separation efficiency for the bulk solids industry. Advanced Simulation Enhances Magnetic Separator Design Goudsmit Magnetics utilizes Finite-Element Modelling (FEM) to analyze and optimize its magnetic systems. This numerical method divides complex physical systems into small elements to solve fundamental physics equations, allowing for highly accurate performance predictions. By simulating systems digitally, the company significantly reduces the time and costs associated with physical prototype design and testing. Multiphysics Integration for Improved Process Flow A critical advantage of the FEM approach is the ability to combine different physical domains, specifically electromagnetics and fluid dynamics. For the bulk solids and food industries, this means evaluating how product flow characteristics, such as velocity and viscosity, impact the efficiency of magnetic separators. This integrated modelling ensures that separators are designed not just for magnetic strength, but for practical effectiveness within a

A properly designed storage or handling system keeps plant safe, reliable and reduces downtime as well as extending the life of equipment. All too often facilities are designed without knowledge of the flow characteristics of the material to be stored. This intensive 3 day course has been specifically designed to help solve problems like these, covering the operation, design and specifications of hoppers and silos for reliable discharge. * Basics of hopper and silo design and function * Dealing with potential problems * Discharge aids and interfacing to feeders We’ll cover the basics in operation, design and specification including an introduction to the storage and flow of bulk solid materials in hoppers, silos, bins and bunkers, feeders and feeding, hopper discharge aids and the prediction of discharge rates. We will also look closely at ways to determine the correct design for reliable discharge, including determining flow properties of bulk solids, hopper geometry and practical design considerations. The third day, an optional session in the onsite laboratories, allows delegates the

Come and visit us. Hall 5, Booth L24 We invite you to visit us at our booth in Hall 5, Booth L24 from March 19, 2026, to March 19, 2026, in Dortmund. Find out about innovative filter systems and current topics in dust extraction technology.

Efficiency in the smallest of spaces Emsland-Stärke GmbH, Germany’s largest manufacturer of potato starch, relies on state-of-the-art filter technology from Infastaub at its Kyritz site. The dust extraction specialist supplied a custom-designed total separator for a large silo system, combining high throughput rates with a particularly compact design. Customized solution for demanding conditions At the Kyritz plant, the task was to reliably separate up to 20 tons of potato starch per hour from the conveying air during pneumatic pressure vessel conveying. At the same time, the structural conditions were severely limited by a restricted plant height, which ruled out a standard solution. Infastaub developed a specially adapted, low-profile filter design. At the heart of the solution is a special, specially designed flat vibrating hopper, which ensures safe and continuous product discharge even at reduced installation heights. The system is designed for a volume flow of 1,500 to 2,400 m³/h and ensures

The integration of precise moisture measurement in concrete production ensures consistent quality and cost-effectiveness by adjusting water and cement ratios in real-time during the mixing process. Optimizing Water-Cement Ratios with Sensors Modern microwave sensors provide instantaneous data on aggregate moisture, allowing for automatic dosing adjustments. This prevents strength fluctuations and reduces the volume of rejected batches in ready-mix plants. Key Technical Advantages of Digital Probes * High-precision microwave measurement technology * Real-time data integration with plant control systems * Wear-resistant sensor surfaces for abrasive aggregates * Significant reduction in cement waste and energy costs Enhanced Quality Control via Mobile Monitoring Handheld moisture meters offer flexibility for rapid spot checks in stockpiles or delivery trucks. These devices complement stationary sensors by providing a comprehensive overview of material conditions across the entire site. Summary In summary, digital moisture measurement methods for concrete and its raw materials provide a precise, fast, and practical basis for quality assessment. Site-specific

Curt Ebert Siebtechnik GmbH is issuing technical guidelines for the installation of screen media to increase efficiency in bulk solids processing and minimize costly downtime caused by wear and tear. Preparation and cleaning of the machine A smooth screening process begins before the actual installation. Thorough cleaning of all support surfaces on the screen machine frame to remove adhering material is mandatory. Furthermore, rubber linings on the supports must be checked for abrasion and correct height, and replaced if necessary. Only a clean base guarantees the optimal fit of the medium. Correct tensioning for maximum service life The tensioning process is a decisive factor for the component’s service life. Tensioning rails or hooks must engage fully with the screen media tensioning folds. Initial tensioning should always be performed evenly from the center of the fold outwards before final tightening. Achieving firm contact with all supports is the primary goal. * Cleaning of support surfaces before installation * Inspection of rubber profiles for wear * Even pre-tensioning starting from the center * Firm contact on all support profiles Regular

Optimized cooling performance for high throughputs with MIXACO horizontal cooling mixers. The high cooling performance of MIXACO cooling mixers is based on a well thought out technical concept. In many industrial applications, fast and uniform cooling is essential for product quality and economic efficiency. Horizontal cooling mixers from MIXACO are specifically designed for efficient and uniform cooling of bulk materials. At the same time, the material is gently homogenized, ensuring consistent mixing results without excessive shear stress. Thanks to the horizontal design wih separate cooling zones combined with an optimized tool geometry, the product is guided directly to the cooled vessel walls and sideplates. This results in highly effective heat removal, even at high throughput rates. The high cooling performance of MIXACO cooling mixers is based on a well thought out technical concept. Engineered for maximum cooling performance * Specially developed tools that continuously transport the material to the cooling surfaces * Separately designed cooling zones that ensure uniform and controlled temperature distribution * Energy efficient cooling through

The processing of copper scrap involves many precisely coordinated processes. When it comes to level instrumentation, Montanwerke Brixlegg relies on radar technology from VEGA. Very few companies can look back on over 550 years of company history. The Brixlegg copper-silver smelter appeared in documents for the first time in 1463. Copper and silver ores were mined there and refined into pure metals up until the 20th century. Since 1890, secondary materials containing copper have been increasingly used as raw materials instead of ores. “While the challenges back then were for the most part exclusively mining problems, today they are much broader. We are now responsible for maintaining a positive interplay between people, the environment and the economy,” explains Patrick Oberladstätter, Head of Electrical Engineering at Montanwerke Brixlegg in Tyrol. Today, Montanwerke Brixlegg AG is a 100 % upcycling company with more than 350 employees and one of the most important industrial operations in western Austria. The plant in Brixlegg is considered a specialist in copper recycling and the associated copper refining. But there is more to it:

In high-demand production environments, downtime is a direct cost. That’s why dependable, cost-effective replacement parts for flexible conveyors are essential. With over 30 years supporting manufacturers worldwide, Trantec Solids Handling supplies high-quality conveyor tubes and spiral augers that deliver OEM-equivalent, like-for-like performance across food, plastics, chemicals, and environmental processing applications. Same-Day Dispatch There is nothing more frustrating than an unexpected breakdown when you urgently need a replacement part, and every hour of downtime is costly. At Trantec, they understand the pressure this places on your operation and your team. That’s why many standard tube and spiral sizes are held in stock for same-day dispatch, helping you respond quickly to unplanned stoppages and support planned routines. Affordable, Reliable Spares Whether you are replacing worn components or building a proactive spares strategy, Trantec tubes and spirals offer a genuinely like-for-like alternative to your original suppliers parts, without the premium price. Designed to be fully interchangeable with major

VEGA, as a specialist in level and pressure measurement technology, will present its proven sensor solutions for the bulk solids industry at SOLIDS from March 18th to 19th, 2026 – at Stand 5-P14 – in Dortmund. The focus will be on solutions for demanding applications in the bulk solids industry where reliability and easy integration are crucial. Reliable level measurement is a central challenge in the bulk solids and process industries – especially under demanding conditions such as dust, noise, build-up, vibrations, or changing process parameters. VEGA offers solutions for this that operate precisely and with low maintenance even under these extreme environments. The focus is on the VEGAPULS 6X with a purge air connection. The universally applicable radar sensor guarantees safe level measurement, even with heavy dust development or antenna contamination. The measuring portfolio is completed by the proven vibration limit switches VEGAVIB and VEGAWAVE. Whether fine powder or coarse bulk solids – the robust sensors reliably report any exceeding or falling below defined limit levels, thus ensuring a smooth process flow. With its robust sensors, VEGA demonstrates

It now offers French customers enhanced solutions by combining over 10 years of experience in mixing with LUM’s comprehensive analytical expertise. LUM is a renowned authority in scientific and measurement-technology expertise, specializing in particle characterization, stability evaluation of suspensions and emulsions, determination of adhesive strengths and quality assurance and process optimization. Their solutions extend across diverse sectors including industrial, food, cosmetics, pharmaceutical enterprises, and academia. ’Made by LUM’ analytical instruments are standard in R&D and QA/QC departments, enabling successful product development and formulation. Recognized for patented technologies and application science studies, LUM serves as a scientific partner, sponsor, and contributor in various international standards organizations and technology promotion initiatives. The new partnership between MP2E SOLUTIONS and LUM GmbH launched on February 1, 2026. It now offers French customers enhanced solutions by combining over 10 years of experience in mixing with LUM’s comprehensive analytical expertise

Stan Egging, Director of TBK Group, highlights how industrial dust control significantly reduces operational costs, enhances employee safety and ensures compliance with increasingly strict environmental regulations. Optimizing bulk handling efficiency Dust reduction is often overlooked because it is not considered part of the primary production process, emphasizes Stan Egging. However, modern bulk solids handling requires an integrated approach to maintain clean and sustainable operations. TBK Group positions itself as a total partner for the prevention of pollution and dust in bulk material processing. Hidden costs of industrial dust The financial impact of dust accumulation extends far beyond simple cleaning expenses. Egging identifies several areas where companies lose significant capital without realizing it: * Premature wear and damage to machinery and periphery equipment. * Excessive cleaning service costs that can often be reduced by up to 60%. * Potential legal claims and higher absenteeism due to health risks. * Continuity risks in a tight labor market where employees demand clean work environments. Integrated technical solutions To tackle these issues,

The Science Based Targets initiative (SBTi) has validated the near-term science-based emission reduction targets of Qlar Group GmbH (formerly Schenck Process). Qlar has thus set an important milestone for a measurable reduction in greenhouse gas emissions in Scopes 1, 2 and 3 in accordance with the Greenhouse Gas (GHG) Protocol and has established emission reduction as a binding component of its corporate strategy. Qlar commits to reduce absolute scope 1 and 2 GHG emissions by 55% by 2033 from a 2023 base year. The company also commits to reduce absolute scope 3 GHG emissions by 36% within the same timeframe. ‘The validation of our near-term targets by the SBTi is a key step for us in consistently aligning our emissions reduction with science-based criteria and managing it in a binding manner,’ says Dr Jörg Ulrich, CEO of the Qlar Group. ‘It increases transparency for customers, partners and employees and makes our progress measurable and traceable against clear targets.’ The SBTi is a corporate climate action organization that supports companies and financial institutions worldwide in making their contribution

EPC Engineering & Technologies and Coperion have developed a one-step process for direct polycarbonate melt compounding, significantly reducing energy use and operational costs for global polymer manufacturers. Innovative One-Step Process for Melt Compounding The new technology integrates the polycarbonate melt directly from the polymerization reactor into a Coperion ZSK twin screw extruder. This eliminates several traditional production steps to streamline the entire process. The collaboration focuses on enhancing efficiency and flexibility within the bulk solids and plastics industries. Key Advantages of the Direct Compounding Technology * Significant reduction in energy consumption by avoiding reheating * Operational cost savings of up to 1 million USD per 100 kta * Lower capital expenditure due to reduced infrastructure needs * Faster market response times through flexible formulation adjustments * Elimination of intermediate pellet storage and conveying systems * PC melt from the reactor is compounded/homogenized in the same extruder with other polymers such as ABS Sustainability and Economic Efficiency By removing the need for secondary extrusion and complex

IMKO Micromodultechnik GmbH utilizes refined TRIME-TDR technology to ensure precise moisture measurement in sand, gravel, and fresh concrete, enabling adherence to strict recipe specifications. Innovative TDR Technology for the Construction Industry For over 40 years, IMKO has developed specialized sensors that surpass traditional measurement methods. The TRIME technology creates a defined measurement volume along the sensor, eliminating the need for recalibration due to surface abrasion. This ensures long-term accuracy and high reliability in demanding bulk solids environments. Advantages of the SONO sensor series: * Short measurement times for rapid process control * High resistance to mechanical wear and abrasion * Flexibility in mechanical integration with low material coverage * Reliable data for w/c ratio determination Quality Control from Material Delivery to Mixing Monitoring begins at the point of delivery. Mobile solutions allow for the immediate assessment of aggregates like sand and gravel before they enter the process. This ensures that recipe adjustments can be made in real-time, preventing costly mixing errors and maintaining project

Safe drum handling: GMP drum openers from BOLZ INTEC reduce the effort required to open clamping rings and increase occupational safety. With its GMP-compliant drum opener, BOLZ INTEC offers a solution for the safe opening and closing of clamping rings on stainless steel drums. The system was developed for applications with high requirements in terms of hygiene, occupational safety, and ease of use, such as in pharmaceutical, chemical, or food production. The construction follows hygienic design principles in accordance with EHEDG. The dead space-free design makes the drum opener easy to clean and also suitable for use in sensitive production areas. The device is autoclavable and can therefore also be used in clean room environments. The drum opener supports safe and controlled handling when opening and closing the clamping rings. This reduces the risk of injury to operating personnel. At the same time, the force required to operate the clamping rings is low, which facilitates ergonomic operation. The drum opener is designed for BOLZ INTEC stainless steel drums with diameters between 315 and

NT Service GmbH provides comprehensive industrial silo cleaning and maintenance across Europe, utilizing advanced rope access technology and vacuum systems to ensure operational safety and high material flow. Advanced cleaning for industrial bulk solids The master craftsman enterprise specializes in the removal of stubborn residues and material bridges to prevent production downtime. By employing certified rope access technicians, the company eliminates the need for expensive scaffolding while maintaining strict safety. Comprehensive service portfolio for silo systems * Industrial silo vacuuming and dust removal * Specialized cleaning via rope access technology * Innovative silo welding and assembly techniques * Expert structural assessments and wall thickness measurement * Detailed logging and documentation of cleaning processes Efficient vacuum technology reduces operational costs The use of high-performance vacuum suction units allows for the economical removal of raw material blockages. This technology transports materials directly into containers, potentially saving operators significant daily costs by minimizing vehicle downtime. Safety and quality

Three days of exhibitions, presentations, expert dialogues, and specialist sessions in Darmstadt, Germany. For many years, the CADFEM Conference has been one of the largest and most prominent events for simulation and engineering. In autumn 2026, it will be held for the first time as an international Conference. From 20 to 22 October, the “darmstadtium” Science and Congress Center in Darmstadt will host a comprehensive program dedicated to simulation and digital engineering in research and industry. Engineers, developers, and decision-makers at all levels are invited to engage with speakers from companies, universities, and research institutions, as well as with CADFEM simulation experts and software developers from Synopsys. More than 1,000 participants are expected from around the world. Several parallel expert sessions will present the latest trends in physics-based simulation, including their connection to current developments in AI, along with numerous practical examples. “Technology development is currently taking another step forward. Artificial intelligence

Screw conveyors enable efficient and reliable bulk material handling. Elit Process provides durable, high-performance screw conveyor solutions for industry. Screw conveyors play a vital role in modern industrial operations, serving as one of the most reliable and efficient methods for bulk material handling. From powders and granules to semi-solid materials, screw conveyors are widely used across industries such as cement, mining, chemicals, food processing, and agriculture. Their simple yet robust mechanical design allows for controlled, dust-free, and continuous transport of materials, making them indispensable in production and processing lines. A screw conveyor system offers numerous advantages that directly impact operational efficiency. First, it ensures consistent material flow, which is critical for process stability and product quality. Second, its enclosed structure minimizes material loss and environmental contamination, supporting cleaner and safer working conditions. Third, screw conveyors are highly adaptable; they can be engineered for horizontal, inclined, or vertical applications, enabling flexible plant

STUVEX, recently acquired by the STIF Group, has developed the Flash explosion suppression system and a chemical barrier. ATEX certified solutions designed to protect critical process equipment in sugar production. A Major Industrial Challenge for the Sugar Industry The sugar industry plays a strategic role worldwide. Sugar production—mainly from sugarcane (nearly 80% of global production) and sugar beets—amounts to more than 140 million tons per year and is concentrated in around a dozen major producing countries. In Europe, the beet sugar sector remains a historical pillar of the agri-food industry, supported by a dense network of sugar factories, storage silos, and packaging plants. This industrial concentration, however, comes with a major and often underestimated risk: the risk of sugar dust explosions. Every process stage—transport, elevation, storage, and filling—can generate clouds of combustible dust, which can lead to serious accidents with grave human, material, and economic consequences. Sugar: A Food Product... Yet Explosive When sugar is dispersed in the air as fine dust, it exhibits all the characteristics of an explosive, combustible material. If it

Sustainability has been an attitude and a responsibility at JACOB for over 100 years. For us, sustainability is not a short-term project, but a fundamental attitude that has shaped our actions as a fourth-generation family business for over 100 years. We bear responsibility towards our employees, our customers, our region and future generations. This responsibility is firmly anchored in our corporate culture and guides us in every decision we make. Our first sustainability report is therefore more than just a collection of figures and climate measures. It shows how we understand and live responsibility as a company, as an employer and as a partner. We think holistically and act courageously: for us, sustainability means designing resource-saving processes, developing innovative solutions for our customers and actively promoting social engagement. As Patrick Jacob, managing director and family man, describes it, sustainability is not a sprint for us, but an alpine expedition. It’s about focus, passion, perseverance and the willingness to continuously

MOLOSroto DF257 is ideal as a full indicator, demand indicator, or empty indicator in hard-to-reach places where level measurement would otherwise not be possible. Would you like to measure the level in a bulk material silo but cannot install a suitable measuring device at the desired measuring point, either from above or from the side? MOLLET Füllstandtechnik GmbH developed the MOLOSroto DF257 specifically for such measuring tasks. With its angled arm and suspended cable shaft with tension weight, this rotary paddle switch enables level measurement even at otherwise inaccessible measuring points. With a maximum arm length of 500 mm and a cable length of up to 5,000 mm, level monitoring is possible at any desired measuring point in the silo. The DF257 rotary paddle level indicator is part of the proven MOLOSroto series and therefore offers all the corresponding advantages. These include insensitivity to pressure, dust, caking, or the material conductivity of the bulk material. In addition, this measuring device can be used at temperatures from -40 °C to +260 °C. Stainless steel housings are available, as are ATEX approvals,

Dust losses at conveyor transfer points are often underestimated – yet they cost the bulk materials industry millions every year. Even a 2% material loss due to dust or spillage can lead to massive economic damage, especially with high-value ores. Contactless sealing systems the AirScrape address this issue directly. Instead of mechanical contact, the system uses controlled airflow to keep fine particles in the process – without wear, without readjustment, without energy consumption and without downtime. The result: * Significantly reduced dust emissions * Higher system availability * Maximum material recovery * Rapid payback – especially for valuable bulk materials Modern conveyor technology proves that efficiency, profitability, and safety go hand in hand.

PMT Processing delivers specialized toll grinding and classifying services for industrial minerals. From pilot-scale samples to high-volume production, we provide tailored, high-purity solutions with advanced spiral jetmill technology. Versatile Processing for Diverse Industrial Materials We offer specialized toll services for a wide range of industrial minerals, including talc, graphite, mica, and zeolite. Our facility is equipped to handle custom requests ranging from small-scale batches of several kilograms to large-volume orders exceeding hundreds of tons, ensuring scalability for every client. Rigorous Standards for Purity and Equipment Hygiene To ensure zero contamination, all our grinding units are engineered for deep cleaning. This meticulous process covers every component in direct contact with the material, from the initial feeding area through to the final packaging nozzle, allowing for quick and clean product changes between batches. Comprehensive Logistics and Integrated Handling Solutions Beyond grinding, PMT provides a full suite of bulk material handling services. Our facility features valve packaging machines, big-bag filling stations, and pallet wrapping equipment. Combined

singold gerätetechnik gmbh continues its history of masterful engineering: with the newly developed magnetic holder, its pneumatically operated knockers—tried and tested for decades—can be turned into a Knocker to go in no time at all. Versatility and Ease of Use Unmatched Mobility for Interchangeable Containers. The magnetic holder is easy to use, wear-free, comparatively lightweight, and makes the pneumatic knocker mobile. The Knocker to go is ideal for interchangeable containers, as it can be attached to silos and containers exactly where needed with minimal effort and complete flexibility. Technical Design and Adaptability Innovative Magnetic Tech for Curved and Rough Surfaces. This revolutionary new development from the specialist in magnetic holding force is based on an aluminium plate that combines low weight with robustness. Mounted on this plate via ball joints are two suction cups made of flexible plastic with integrated neodymium magnets. The magnet–suction cup combination flexibly adapts to the shape of the container and compensates for inclines and curvatures. As a result, the Knocker to go is also perfectly suited to rough and contaminated surfaces. Durability and High-Impact

Coal washeries face high chemical waste due to poor slurry control. RETTAR Thicker Bed Level Monitoring offers precision, saving millions annually. Coal slurry thickeners are the core of solid-liquid separation in coal washing, and their operational efficiency directly affects the economic benefits of coal washeries. However, traditional thickener management methods have long been plagued by prominent problems: turbid overflow risks, uncontrollable flocculant (PAM) costs due to experience-based dosing, and inefficient maintenance caused by easy interference of traditional instruments. To address these pain points, RETTAR Thicker Bed Level Monitoring System provides a professional solution. With vertical penetration sensing, dual-signal scanning and cloud intelligent control as its core, the system’s probe goes deep into the thickener, directly penetrating the coal slurry medium to accurately monitor the distribution of clear liquid layer, sedimentation layer and sludge layer, avoiding data distortion caused by tank wall scaling and bubbles. The system dynamically adjusts flocculant dosage according to real-time

to remove adhering moisture, disperse viscous layers, remove dust and waste, RAFAK240 & RAFAK160 Round Air Knives The powerful, elongated airflow of an air knife (also called a blower knife or air squeegee) can be used to remove adhering moisture, disperse viscous layers, remove dust and waste, cool, and separate two rooms/process conditions. Features and Benefits of FIKTECH Air Knives & Air Cannons An effective way to blow, dry, cool, and clean, among other things. Easily adjustable and controllable (with compressed air or a side channel fan/blower). Evenly distributed airflow, high speeds (up to 200 m/s) and blow-off force. Material: Aluminum and stainless steel 304/316. Standard and special lengths available. Straight and round versions. Easy to assemble, no moving parts, virtually wear-resistant. Fiktech recently supplied these Low Pressure Air Knives for dry blowing round pipes before a coating is applied.

VAS SafetyFlow, the latest development from Axians IAS, promises greater safety and a standardized, digital training process across all plants. In bulk material plants and industrial facilities where heavy equipment and hazardous materials are handled, strict safety regulations apply to prevent accidents and personal injury. Operators must ensure that external parties such as truck drivers, service providers, or visitors are appropriately trained before entering the plant. With “VAS SafetyFlow,” Axians Industrial Applications & Services GmbH now presents its answer to the question of how training processes can be carried out efficiently and digitally. Increased safety through mandatory training and controlled access VAS SafetyFlow is a central, web-based software platform that allows the entire training process to be mapped, controlled, and documented entirely digitally, from the creation of plant- and user group-specific safety trainings to the management of users and training certificates. The multimedia and multilingual trainings can be completed independently of location and device via any browser: After

Reliable sensor and system solutions for liquids and bulk solids – ensuring safe, efficient, and sustainable processes In the chemical industry, precision is essential at every stage of production. Whether storing, mixing, or dosing liquids and bulk solids, accurate level measurement protects people, the environment, and equipment, safeguards product quality, and prevents overfilling or dry running. Early leak detection further enhances operational safety. As an experienced partner to the process industry, UWT supports plant engineers and operators worldwide with comprehensive solutions for level measurement, monitoring, and visualization – from individual process lines to centralized plant control systems. Measurement solutions that make a difference The chemical industry is as diverse as its products. A wide range of media – from aggressive acids and alkalis to solvents, abrasive powders, and sticky pastes – requires precisely tailored measurement technology. With its broad product portfolio, UWT covers all key application areas: * Point level detection using capacitive,

Take part in our workshop and gain insight into the physical properties of disperse systems, which essentially determine the quality of your end product. Learn how to measure particle size and shape of your products correctly, reliably and reproducibly with our modular instruments, which can be flexibly adapted to the specific needs of your products and processes. Our one-day event combines seminar sessions and a hands-on workshop. In the morning, we will take a look at the basics of characterising particle size and shape as well as our analysis systems and their areas of application. In the afternoon, we will demonstrate our instruments and analyse samples together with you. You are welcome to bring your own samples, which we analyse on site or at a later date. We look forward to your visit. Register on our website. Dates * Copenhagen| March 11 * Oslo | March 18 * Manchester | March 24 * Oxford | March 26 * Etten-Leur | April 14 * Hamburg | April 15 * Leuven | April 16 * Frankfurt| April 23 * Warsaw | April 29 * Zurich | May 6 * Paris | June 16 * Lyon | June 18 * Dublin | September 9 * Barcelona

Bückmann GmbH & Co. KG has inaugurated a 2,500-square-metre facility in Mönchengladbach, centralizing its screening and fabric operations to boost efficiency and meet rising demand in the food, chemical, and hygiene sectors. Bückmann GmbH & Co. KG has moved into new, modern production facilities right next to its headquarters in Mönchengladbach. The previous halls could now be reunited on an area of more than 2,500 square metres. This enables Bückmann to create the ideal conditions for efficient processes and the highest quality standards. Strategic Expansion and Site Consolidation The production facilities previously used at the headquarters will be taken over by the sister company, Bückmann Lohnaufbereitung GmbH & Co. KG. The well-known bulk material toller requires these in order expand its capacities for growing needs in screening, mixing, grinding, compacting and filling on a contract basis. Precision Manufacturing for Custom Fabric Solutions On the other hand, the new production facilities will be used for tensioning screen frames and assemble state-of-the-art plastic and metal fabrics. Various manufacturing methods enable flexible and precise processing – from individual

Asymmetrical drum funnels for controlled filling and emptying of drums and similar containers. Asymmetric funnels are used primarily in the chemical, pharmaceutical, and food industries and are designed for applications with high requirements for material resistance, hygiene, and process reliability. Manufactured from austenitic stainless steel 1.4404 (AISI 316L). This material offers high corrosion resistance to aggressive media as well as good mechanical properties and is suitable for contact with sensitive products. The asymmetrical design supports targeted material flow and facilitates largely complete emptying, thereby reducing product residues and losses. To improve cleanability, the inner surfaces are treated using the Optimized Grind Finishing (OGF) process. The resulting surface roughness of Ra < 0.25 µm reduces particle adhesion and supports hygienic cleaning processes. In addition, the drum funnels are electropolished to further increase surface smoothness and corrosion resistance. The design of drum funnels complies with GMP guidelines

How VEGA’s IoT level measurement technology is paving the way for automated logistics For a long time, level measurement was a simple, local issue in the process industry. Sensors detected whether a container was empty or full, sometimes providing percentage values, but rarely integrating the results into larger systems. However, this view of measurement technology has changed fundamentally. Today, it’s no longer just about individual measuring points, but about networked systems: about greater transparency, higher efficiency – and about making decisions automatically, before they become urgent. VEGA recognised this transition early on and helped shape it – with, among other things, the autonomous VEGAPULS Air radar sensor, VEGA Inventory System, the APL communication standard and universal Bluetooth connectivity. The goal of these developments is to make logistics processes not only more efficient but also more proactive. At the centre of all this is the concept of user-friendliness: Solutions should make everyday work noticeably easier. Step

The SIFTOMAT mini is a powerful solution for screening small batches of a wide variety of bulk materials – ideal for laboratories and pilot plants. The SIFTOMAT mini from FUCHS Maschinen AG is a compact for sifting very small throughputs and was developed specifically for use in laboratories, pilot plants, and small production environments. As a mini version of the proven SIFTOMAT plansifter, the SIFTOMAT mini also uses the principle of flat, eccentric sieve movement. An eccentric drive sets the sieve stack in a uniform vibration, which treats the material to be sieved particularly gently and at the same time achieves high sieving quality and reproducible sieving results. The plansifter is suitable for all classic sieving applications such as control sieving, dedusting and classification, making it versatile for use in bulk material processing, including in the food, pharmaceutical, chemical and plastics industries. Thanks to its extremely compact design, the SIFTOMAT mini requires only a small footprint without compromising on performance and functionality. A particular advantage is the extremely quick

As the pet food market expands, packaging technology is shifting toward high-speed flexibility and superior shelf-life preservation to meet rising consumer expectations for quality and convenience. Adaptability in a Diversifying Market The pet food industry continues to grow worldwide, driven by the increasing number of pet-owning households and a strong focus on quality nutrition. This evolution has placed pet food bagging at the center of the production process, as packaging plays a crucial role in product protection, safety, logistics, and brand presentation. Versatile Solutions for Modern Formats Modern pet food bagging must protect the product from moisture and contamination, ensure accurate weight, and offer practical and durable formats for consumers. As demand shifts toward a wider range of bag sizes—especially smaller, more convenient formats—manufacturers require flexible and efficient bagging solutions capable of adapting quickly without sacrificing productivity. Engineering Excellence in Bagging and Sealing PAYPER automatic bagging machines are designed to meet these needs, allowing fast format changes and precise bag handling. Advanced

Fertira has partnered with Poeth to double its production capacity. By adding two new pressing lines and massive solar power, the expansion ensures high-precision, sustainable fertilizer output. Doubling Capacity with Advanced Pressing Lines In order to maintain production capacity now and in the future, Fertira decided in 2024 to expand the existing factory with two additional pressing lines, thereby doubling capacity. In addition, the silo block for raw material storage had to be significantly enlarged and more bulk storage had to be created for the pellets and crumbs produced. ‘The starting points for the new factory were minimal product damage, minimal drag and high accuracy and homogeneity of the mixtures,’ says Isabel. ‘We also felt it was essential for the new factory to offer maximum flexibility. Only then can we deliver customised solutions to our customers in addition to standard formulas.’ Choosing a Partner with Global Project Expertise In their search for a machine builder who could realise the new factory, Wim Blancke and Isabel Ranschaert ended up at Poeth in Tegelen. ‘Our company operates in a huge niche market. Poeth is one of

Our moisture measurement system FMS II is installed successfully in different industry fields for the determination of the moisture/water content of many different kind of materials (e.g.: powder and bulks, sand, granules, pellets... oil, diesel, coolant, sludge... ). The sensor could be installed on conveyor belts, in material chutes, silo outlets, dryers as well as in tanks and pipes and many other installation places. The moisture measurement system has been developed and made by our company especially to improve quality and to ensure a high-grade quality standard. With just one calibration of the sensor according to the local data and conditions we guarantee exact and replicable results.

Our ’Committed’ status highlights the quality of our sustainability management and our dedication to transparency across the entire value chain. At RHEWUM, sustainability is far more than just a promise – it is an integral part of the corporate culture and actively practiced. This deeply rooted approach has now received official recognition from EcoVadis, a globally leading and independent platform for sustainability assessments. The awarding of the ”Committed” status confirms RHEWUM’s consistent dedication and underscores the high quality of its implemented sustainability management system, as well as its commitment to comprehensive transparency along the entire value chain. EcoVadis A Global Standard for Sustainable Corporate Governance EcoVadis has established itself as a trusted partner that helps companies assess and improve their sustainability performance. The platform provides detailed ratings, information, and tools that are essential for effectively managing risks and compliance issues in the Environmental, Social, and Governance (ESG) areas. The assessment is based on 21 sustainability

Easily map out flows and processes on the workfloor in straight lines with robust ToughStripe floor tape - and the new applicator from Brady. The new ToughStripe Floor Tape Applicator from Brady is engineered to increase precision and reduce labor requirements during industrial floor marking projects. Designed for single-person operation, this tool utilizes a heavy-duty plastic and steel construction to ensure durability in warehouse and manufacturing environments. Precision Meets Ergonomics The applicator features a patent-pending removable cartridge, allowing you to load tape at a comfortable height before snapping it back into place. Its stable three-wheel design and integrated tightening disc ensure professional, jam-free lines every time. Clean and Versatile Forget manual liner removing. The built-in liner rewinder automatically collects spent tape liner as you go. Compatible with tapes from 50mm to 150mm wide, it’s the ultimate tool for 5S lean manufacturing and warehouse safety. Solo Operation Power Optimised for single-person use, allowing one person to do the work of a two- or three-person

P78-E sensors for hazardous areas under ATEX, UKEX and IECEx Special precautions apply in areas where there is a risk of dust explosion. Liebherr offers certified sensors for determining the moisture in bulk materials for the potentially explosive atmospheres Zone 21 and 22. Bulk solids and materials such as coal, flour, wood, cocoa, coffee, sugar, starch and cellulose as well as magnesium and aluminium can be determined in-situ (real time) for the moisture value under particularly explosive conditions in conjunction with our proven FMS II evaluation and transfer unit. The sensors find their place in mixers, mills, dryers, conveyor belts, extraction points and the like. Send the measured values directly and in-situ to your higher-level control system. The self-sufficient measuring device for precise moisture determination in the running process guarantees the highest quality and safety in EX-protected production environments, the further processing and refinement

LUM GmbH welcomes international partners to exchange information on the latest analytical solutions From February 9th to 11th, LUM GmbH will once again welcome its international sales partners to exchange information on the latest analytical solutions for customer inquiries in the fields of particle and dispersion characterization and materials testing. The event will take place as the 24th International Sales Meeting, for the first time at the new location at Wagner-Régeny-Str. 16 in Berlin-Adlershof. Special training LUMiReader Training on the new Gravity Separation & Particle Analyser LUMiReader. X-Ray 440 is a key focus, as this new product takes the applicability of X-ray STEP technology to a new level. It is now possible to comprehensively characterize inorganic particles and their formulations from various perspectives using just one analyser. This significantly expands the range of applications for dispersions, suspoemulsions, and emulsions. Powders, foams, chemical solutions, flat solid objects, and particles in solid matrices become accessible. Environmentally

Secure mining assets with the 3DPro2501 LiDAR Scanner. Achieve 98% volume accuracy in gold ore stockpiles to eliminate audit errors and ensure financial safety. The Financial Risk of Inaccurate Gold Inventory In a market of record-high gold prices, every cubic meter of ore represents significant capital. For mining enterprises, temporary stockpiles are not just raw materials—they are high-value financial assets. Traditional inventory methods like manual estimation or periodic physical checks are no longer viable as they introduce massive blind spots in valuation. Even a minor volume error can lead to millions of dollars in financial discrepancies. This lack of precision threatens corporate transparency and audit compliance, making high-precision measurement a financial necessity. Why Traditional Stockpile Measurements Fail Gold mining environments present unique challenges that render standard surveying tools ineffective. Open-air stockpiles undergo constant shape changes due to continuous loading, creating irregular surfaces that manual methods cannot map accurately. Furthermore, manual auditing is notoriously slow,

They made NORD DRIVESYSTEMS a system provider: Since the 1980s, frequency inverters have been an integral part of the modular products offered by the specialist for drive solutions from Bargteheide. NORD’s drive electronics portfolio meets the requirements of numerous industry applications and always stays close to the market with its developments. During the configuration and design of a drive system, NORD takes more into account than just motion. The focus is on energy consumption, increased operational reliability, reduced total cost of ownership or similar issues. “For us, drives are more than just their power”, says Jörg Niermann, Head of Marketing at NORD DRIVESYSTEMS. “We develop drive solutions that are precisely tailored to applications and associated customer requirements.” NORDAC frequency inverters: Compatible and multi-functional The company maintains a wide range of products from which it can precisely develop system solutions for applications. Since the mid-1980s, an extensive portfolio of centralised and decentralised drive electronics supplement the manufacturer’s motors and gear units to create complete solutions. The range

CASE is delighted to announce that EMH Plant has been appointed as the new CASE Construction Equipment dealer for the North East and North Yorkshire. Regional commitment and comprehensive service This appointment strengthens our commitment to the region and offers customers access to the full CASE range, supported by a dedicated team for sales, genuine parts, and service. Focus on customer proximity and sustainable growth “I am proud to welcome EMH to our family. This new dealership, led by a young, forward-thinking team, is another step in CASE’s strategy for closer customer proximity and support throughout the entire machine life cycle. EMH reflects our proactive approach and our commitment to sustainable growth in the North East and North Yorkshire.” – Valentina Versino, Business Director UK&ROI at CASE Construction Equipment. A milestone for EMH Plant and world-class support Ian Phillips, Director of EMH Plant, said: “Being appointed as the authorized CASE dealer for the North East and North Yorkshire is a milestone for EMH Plant. Our goal is simple: to support every machine with fast service

Why standardized systems are often the better choice in bulk material handling. In industrial bulk material processing, custom-built solutions are often seen as the gold standard. Complex products, demanding processes and high requirements for efficiency and safety frequently lead to highly individualized machine concepts. However, in practice, one thing becomes clear: a large share of applications follows recurring, well-defined patterns. This is exactly where standardized filling and bagging systems come into play. Standard applications dominate the market Whether powders, granules or free-flowing bulk materials – around 80% of industrial filling tasks operate within clearly defined parameters. Conveying systems, dosing principles and bag or container types are often very similar. For these applications, a fully customized system is usually not required – and often not the most economical choice. Instead, preconfigured and proven systems are gaining importance. All systems follow the same principle: clear configurations, reduced variant

CASE is delighted to welcome aboard HRN as the newest member of the Dealer network in UK. Tradition and Expertise in Scotland For more than 45 years, HRN has been one of Scotland’s leading family-owned providers of construction, agricultural, and professional groundcare machinery. Strong Regional Presence and Top-Tier Service From four locations—Stirling, Insch, Balbeggie, and Caithness—HRN has built a reputation for reliable equipment, excellent customer service, and expert support. The company works closely with construction firms, contractors, operators, farmers, estates, golf courses, and recycling plants across the country. Comprehensive Range and Individual Advice HRN offers one of the most extensive ranges of new and used machinery in Scotland, backed by dedicated sales, service, and parts teams. Our expert team focuses on finding the right machine for every customer’s workload and budget, ensuring performance, productivity, and long-term support. “We are delighted to welcome HRN as the newest member of our dealer network. HRN’s

Recording of the interview with Axel Ebbecke on ARD-Hessischer Rundfunk about process engineering and the new products from Ebbecke Organic. With state-of-the-art machinery and decades of experience, A. Ebbecke Verfahrenstechnik AG offers flexible contract manufacturing for the chemical, food, cosmetics, defense, and pharmaceutical industries—from concept to implementation. Click on the ”More information” link to watch the entire episode.

The Masterflex Group has been awarded the TOP 100 seal 2026. This makes the company one of the most innovative medium-sized companies in Germany. How much working time does the boss reserve for the topic of innovation, how many innovative ideas do the employees bring to the table - the scientific selection process of TOP 100 revolves around such questions. Strict test criteria Innovation researcher Professor Nikolaus Franke and his team examine the five categories of innovation-promoting top management, innovation climate, innovation processes and organization, external orientation/open innovation and innovation success in detail. The basis for this is an online questionnaire that the participating companies fill out beforehand. Repeatedly awarded The five categories are reflected in more than 100 test criteria. The Masterflex Group impressed in the selection process and has been awarded the TOP 100 seal since February 1. This is the 5th time that the company has been one of the top innovators. The repeated award recognizes above-average innovation management and underlines the company’s consistent focus

Discover innovative hose solutions for demanding transportation and conveying applications at the trade fair and request tickets Masterflex Group, a leading international manufacturer of plastic hoses and connection solutions, will be presenting its latest hose systems for the safe conveying of granulate, powder and bulk solids at SOLIDS 2026 on March 18 and 19 in Dortmund. SOLIDS is regarded as the leading trade fair for bulk solids and conveying technology and therefore offers the ideal platform for presenting innovative developments to an international trade audience. Reliable PU hoses for maximum service life and greater process reliability; The focus of the trade fair appearance at stand 5-Q14 will focus on the high-performance hose types ”Master-PUR Inline” and ”Master-PUR Performance”. The polyurethane hoses are among the most abrasion-resistant PU conveyor hoses in the world and significantly outperform conventional elastomer hoses in many applications. This is made possible by a patented manufacturing process that allows a seamless hose construction without internal weld

Industrial manufacturer Instarmac Group PLC has successfully eliminated frequent downtime by replacing problematic butterfly valves with the Vortex Clear Action Gate for handling sticky bitumen-coated limestone. Overcoming material handling challenges In the bulk solids industry, handling abrasive and sticky materials often leads to mechanical failure. Instarmac previously faced 12-week maintenance cycles due to material compaction and twisted valve shafts caused by the weight of the material headload and inadequate sealing. Engineered for difficult applications The Vortex Clear Action Gate addresses these issues through a design that prioritizes durability and consistent sealing. Key technical features of the gate include: * Wear-compensating hard polymer seals that remain shielded from the flow. * A self-cleaning blade action that clears material from sealing surfaces. * Elimination of metal-on-metal contact to prevent seizing and galling. * Custom service inlets for seamless integration into existing vacuum systems. Measurable improvements in production Since the installation of the initial unit in early 2024, the facility has reported zero operational failures.

Automation is a good thing. It improves efficiency and enables smarter production. But while technology moves fast, human connection is quietly disappearing. Across industries, technology continues to push the boundaries of what is possible, driving higher efficiency, improved accuracy, and smarter production processes. But there is a quieter trend moving alongside this technological progress, one that often goes unnoticed until it becomes a problem: the automation of human connection. Today, reaching support can mean navigating chatbots, ticket systems, and endless phone menus before finally speaking to someone. Even then, the answer is often generic, detached from the real-world context of your application. In highly technical environments, where every process, installation, and production line is different, this lack of real expertise can quickly lead to frustration, downtime, and costly mistakes. Automation where needed, people when needed At Penko, automation and optimization are core values. Our weighing solutions, indicators, controllers, and software are designed to integrate seamlessly into automated production

Greif-Velox awarded for its ultrasonic sealing innovation, enabling clean and secure closure of valve bags in powder processing industries. Ultrasonic sealing solution Greif-Velox Maschinenfabrik GmbH has been recognized as a Top 3 finalist at the Best of Industry Award 2025 for its patented innovation ValvoSeal Safe, competing in the category “Process Industry – Process Engineering”. The award ceremony took place on January 22 in Würzburg, Germany. The ultrasonic sealing solution from Greif-Velox impresses in the category “Process Industry – Process Engineering” Clean, secure sealing for demanding powder applications ValvoSeal Safe is an ultrasonic sealing solution for the automated, dust-free, and secure closure of valve bags—a crucial innovation for industries handling fine, reactive, or hazardous powders. The technology enables tool-free, reproducible, and 100% tight sealing of valve bags, offering: - Zero dust leakage - Improved safety and hygiene - Elimination of manual post-sealing - Fewer downtimes and optimized throughput Broad industry relevance ValvoSeal Safe integrates

Emerson Relaunches ASCO™ Series 327C Solenoid Valve with Enhanced Features for Improved Operational Efficiency Emerson is enhancing the ASCO™ Series 327C solenoid valve, featuring new Intrinsically Safe and Manual Reset construction versions. The valve is designed with a direct-acting, high-flow technology that offers superior flow-to-power ratios, making it ideal for high-demand industries such as power plants, refineries, and chemical processing facilities. The ASCO Series 327C offers a balanced poppet construction for high-flow efficiency and is capable of operation in harsh environments, with temperatures ranging from -60 to 90°C. The valve’s unique two-layer dynamic seal technology reduces friction and ensures stiction resistance, providing reliable and consistent performance over its lifecycle. New to the Series 327C are the Intrinsically Safe and Manual Reset versions, providing faster response times and greater reliability. The intrinsically safe model eliminates the need for an electronic booster, enabling more consistent partial stroke testing and faster