Categories

Alternatif for a Plugtype of Flaptype wissel Quantum® 2 Way WYE Line Dilute phase pneumatic conveying Positive air and material shut off to off leg Handles non abrasive to moderately abrasive powders, granulars, or pellets Vertical or horizontal valve application May be used as diverter or converger May be used with pressure or vacuum system Modifications available for a variety of environments

Swing valve for Pressure and vacuum applications For safe and reliable shut–off, metering, feeding anddischarging of all dry and free–flowing bulk solids,gases, fluids and fluid–solid mixtures. Absolute pressure and air tight in product flow areaand to the atmosphere through the use of the paten-ted Pressairmatic–PAM seal. In application as inletvalves on top of pressure vessels, especially withabrasive products (e.g ash) and also as inlet and di-scharge valve on vacuum drying drums, pressurefiltrations systems and elsewhere differential pres-sure, gas and vacuum tightening is required. Features: Enviroment friendly encapsuled housing Short opening and closing time (<2 sec) Pressure and vacuum tight in product flow areaand to the atmosphere till 6 bar abs. according toDIN 3230 Leckrate 1. As working valve usable also for high frequencyoperation Extra ordinary long life time also for abrasive solids such as flyash= minimum repairing and down time Material of Construction: Housing material from

ITS BV heeft het afsluiterprogramma uitgebreid met robuuste schuifafsluiters voor het veilig en bedrijfzeker regelen of afsluiten van de productstroom onder hoppers, tanks, silo’s en mechanische transportsystemen in de stortgoed industrie. De robuuste schuifafsluiters zijn verkrijgbaar in vierkante en rechthoekige uitvoering, behuizing en blad volledig in staal of roestvast staal 304 of 316, hand-, pneumatisch- of elektrische bediening, stofdicht en geschikt voor ATEX zone 21. Gunstig geprijsd en snelle levertijd vanaf 2 werkweken. Voor meer informatie neem contact op met ITS BV of bezoek de site van ITS BV.

The 2-way WYE Line Diverter is specifically engineered to handle dry bulk solids in vacuum or dilute phase pneumatic conveying systems with pressures up to 1 bar. The 2-way WYE Line Diverter provides a number of significant advantages over traditional flapper and rotating tunnel style diverters. Trouble spots inherent in these conventional diverters are eliminated with the 2-way WYE Line Diverter, providing superior sealing, low installation weight, fast `in-line` maintenance, and an abrasion resistant design for long-term, reliable service. Adapting the 2-way WYE Line Diverter to your system requirements is made easy with a wide selection of actuators, position indication switches, flanges, and tube stubs and is available in 50mm through 200mm. The 2-way WYE Line Diverter also offers a wide variety of modifications to accommodate high or low temperatures, corrosive, humid, and hazardous environments. The 2-way WYE Line Diverter is versatile and well-suited for many

The Vortex Quick Clean Orifice Gate valve is ideal for industries handling dry products requiring a valve that needs to be cleaned often (pigments, sticky materials, dry foods, dry dairy products, and pharmaceuticals). It is an excellent choice for applications requiring daily sanitation of equipment to eliminate potential growth of bacteria and micro organisms. Other slide gate valves cannot be readily disassembled and cleaned. They allow cross-contamination, material build up and spoilage. The Vortex Quick Clean Orifice Gate valve features an all-stainless-steel weather-resistant design offering improved sealing performance, higher durability, easier maintenance and utilizes ferrule-type fittings for quick removal and press lock latches for quick disassembly and cleaning. The patent Vortex Quick Clean Orifice Gate valve is versatile and well suited for many dry-material-handling applications. It can be applied to control, shut off, or meter the flow of nonabrasive

HIGH EROSIVE SLURRY CONTROLS Bray Controls proudly offers the Series 39 high performance slurry control valve. The Series 39 has been designed to withstand the most highly erosive and abrasive services in alumina refining. It has also been succesfully applied to other applications where control of erosive product is required. The Bray Series 39 control valve is made to the highest standard from technically advanced wear resistant materials such as sintered silicon carbide ceramic, partially stabilized zirconia ceramic and special chrome-molybdenum iron. Therefor, Series 39 is the ultimate product for use on severe erosive slurry and abrasive applications.

The new DMN-WESTINGHOUSE GPD is a two-way, demountable gravity diverter valve and is ideal for system installations that require frequent cleaning with minimum downtime. Design allows fast disassembly in installed location and easy access to all product-contact surfaces. The GPD is available in 4 sizes and in cast iron, aluminium or stainless steel. The GPD diverts gravity fed material to either of two lines by a rotating blade that swings through 120° to fully close off the unused port. This is done with extremely close, machined tolerances between rotating blade and body. Material flow through the valve is unrestricted with no ledges or dead spots and the product flow can be changed on the fly with most powders. The valves are manufactured in a range of finish options, including sanitary specification. Comparable fabricated gravity flap diverters normally have a polyurethane flap clamped between two metal plates to provide the seal. The disadvantage of this