Categories

Metso HiSafe Systems At the end of 2012 Metso was launching several new products in the Metso Product Range. HSE (Health, Safety and Environment) is very important for us so we invest in possible solutions that are complementary with our conveying solutions. We develop safety solutions for conveyors and we reinforce solutions for dust That`s why we launch the next products: - Metso HiSafe Systems - Metso Belt Turning Systems - Metso Loading Systems - Metso Sealing Systems Metso HiSafe Systems Focus on safety around the conveyor, nip/pinch protection for moving parts, elimination of risks, no moving parts, preventing serious accidents - Metso HiSafe Roller Guard - Metso HiSafe Roller Guard Return - Metso HiSafe Head Pulley Guard (HPG) - Metso HiSafe Tail Pulley Guard (TPG) with a Rock Deflector Metso Belt Turning System (Used to keep both sides of the belt clean and to keep more grip on the drums) Metso Loading Systems - Metso Glide Block - Metso Chain Cradle -

Rub-Block with a PT100 sensor The Rub-Block RB200DN with a PT100 temperature sensor is designed to report the misalignment of a conveyor or elevator belt. The advantage of the Rub-Block is the fact that it will send a continuous output signal to the PLC. The Rub-Block emits a permanent life standby signal. If such a signal is absent, this must be investigated and if required the PT100 sensor must be replaced. As long as the Rub-Block emits a standby signal, it will also emit an emergency contact signal caused by its temperature rising, as soon as a belt touches it. Off-tracking belts running into the side of conveyor equipment will cause friction, which may cause damage to the belt, and may generate heat, fire, or a dust explosion. The Rub-Block is very easy to install, it will be fitted on both sides of a conveyor or elevator belt. Once the belt off-tracks and runs onto the brass plate of the Rub-Block, it will create friction and the temperature of the Rub-Block brass plate increases.