Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

Archive February 2020

Submit a news item
Accurate weighing on board fishing vessels. Dynamic compensated weighing.
Accurate weighing on board fishing vessels.
Dynamic compensated weighing. Quite a few challenges had to be tackled, but here too it’s dogged does it. In good cooperation with Vcu tcd b.V. (Vissers Coöperatie Urk) PENKO succeeded in developing systems that make precise weighing possible, even on the high seas. This means that, despite the continuous movements of the ship, the weight of the fish per crate is accurately determined. These movements not only make the weigher going up and down, so alternately undergoing accelerations and decelerations, but the weigher also inclines around two axes simultaneously. Not only this combination of factors automatically is compensated, the system also adapts to any differences in gravity. After all, when things are going well, ships are continuously on the move. The application on board consists of filling crates with the caught fish for sales. The system is sufficiently accurate to perform this operation in accordance with the legal requirements, what makes checking at the fish auction superfluous.…
25-02-2020  |  3105  |  product news  | 
Continue reading
Meet the Glatt Experts @ CRU Phosphates 2020 Learn more about PHOS4green and phosphorus recovery by fluid bed technology
Meet the Glatt Experts @ CRU Phosphates 2020
Learn more about PHOS4green and phosphorus recovery by fluid bed technology Save the date: Cru phosphates 08.03. – 10.03.2020 / Paris Marriott Rive Gauche, Paris, France How to produce dust-free granulates and pellets from powders and liquids a single process step? Didier Schons, Area Sales Manager, Process Technology Food, Feed & Fine Chemicals at Glatt Ingenieurtechnik Weimar, explains how this is done. In his lecture on “Creating functionalized phosphorous granules by fluidized bed processes”, he will be discussing the almost limitless possibilities offered by this technology for particle design of bulk solids in all areas of the powder processing industries. The presentation also highlight son “PHOS4green”, a Glatt innovation to recover phosphates out of sewage sludge ashes into standardized fertilizer granules. This waste-free process meets the needs for a sustainable agriculture Powders and liquids can be granulated, coated, dried and functionalized in the fluidized bed and spouted bed in one step. Product properties such…
24-02-2020  |  12605  |  press release  | 
Continue reading
Poeth VDX Cooling Screw Conveyor
cooled body and shafts Poeth Solids Processing realizes a process line in which two cooling mixers cool abrasive powder back to a temperature of 50 ° C The system is equipped with a double-walled trough and cooling through the shafts. Process water of 20 ° C is used as cooling medium in this case. With indirect cooling, there are no large amounts of air that need to be filtered. For various reasons such as ATEX, hygiene, adhesion of powders, indirect cooling can be interesting. Process type: continuous Capacity: 500 kg / hour Temp in: 200 °C Temp out: 50 °C Due to the wear-and-tear behavior of the product, the paddles are welded with a Wolfram Carbide alloy. Poeth has calculation models to be able to determine the required cooling capacity and systems theoretically in advance.
13-02-2020  |  1785  |  product news
Continue reading
Screening solutions for fertilizers at the CRU Phosphates 2020 in Paris The most important annual meeting in the fertilizer, industrial phosphate and feed industries.
Screening solutions for fertilizers at the CRU Phosphates 2020 in Paris
The most important annual meeting in the fertilizer, industrial phosphate and feed industries. The CRU Phosphates Conference will be held in Paris from 8 to 10 March, 2020. More than 400 delegates of the global phosphate supply chain from 40 different countries regularly attend the conference. This year`s agenda will focus on presenting the latest market updates and technical innovations. In 2019, there was oversupply in the global market, which was accompanied by a decline in global demand and pressuring prices. Industry experts will share their views on the prospects for demand growth and price recovery as well as market developments in 2020 and beyond with the conference audience. There will also be technical papers and presentations specifically designed for operators in the mining and plant sectors. The aim is to share experiences, develop solutions to operational challenges and learn how new developments of technology, process, material and equipment can improve efficiency, environmental compliance and productivity. As an expert for difficult to screen…
13-02-2020  |  11026  |  press release  | 
Continue reading
High-performance screening machines for the potash industry Sceening machines are indispensable in the potash production process.
High-performance screening machines for the potash industry
Sceening machines are indispensable in the potash production process. Potash is an essential building block of life. Together with nitrogen and phosphorus, potash is the third essential one. It supports plant growth, enzyme activity, protein formation, photosynthesis, respiration and the improved absorption of nutrients. Almost 95% of all potash produced is used as a fertilizer. Potash extraction Potash deposits, which are located at fixed positions and depths of up to 1400 m, are extracted by mechanised methods of underground mining. When underground extraction is no longer feasible due to the depth of the deposits and/or when water inflow problems hinder conventional underground mining, the extraction of salt domes is used. Solar evaporation of brine containing natural potash is the third method of extraction. Screening technologies in the potash industry Screening machines are required at various points in the processing chain. Starting with the extraction, because the mineral extracted from the mines is first crushed and then pre-classified.…
13-02-2020  |  11436  |  press release  | 
Continue reading
Efficient recycling of laminate waste For a manufacturer of wooden floors, a RHEWUM screening machine is the solution to increase efficiency.
Efficient recycling of laminate waste
For a manufacturer of wooden floors, a RHEWUM screening machine is the solution to increase efficiency. The laminate manufacturing process involves many steps. The biggest waste, however, occurs when the wooden boards are cut into planks. Both cut waste and sawdust are produced, which can hardly be sold as a final product. This was exactly the problem that RHEWUM`s screening machines were used to deal with in 2016, when one of the global leaders in wooden flooring and interior design relied on RHEWUM to recycle its waste and thus increase the overall efficiency of its production. The special challenge here was the separation of the finest sawdust from a mill. In general, wood-based materials tend to clog the screen cloth easily. During the screening process, the fine particles can get stuck in the meshes and reduce the screening performance. In this case, the customer`s grain spectrum was broad. From easily visible wood chips with a size of more than 10.0 mm, which have to be crushed again, to the screening of fine dust below 400 microns, which accounts for almost one…
13-02-2020  |  10886  |  press release  | 
Continue reading
Edinger Industrievertretungen supports RHEWUM customers New sales representative for Southern Germany, Austria and Switzerland
Edinger Industrievertretungen supports RHEWUM customers
New sales representative for Southern Germany, Austria and Switzerland Since the end of 2019 Joachim Edinger is the new sales representative of Rhewum gmbH for Southern Germany, Austria and the German-speaking Switzerland. The main activity of Joachim Edinger Industrievertretungen from Leinburg in the Nürnberger Land, Germany, is the representation of companies supplying capital goods and technical equipment. Joachim Edinger always sees himself as a mediator between the interests of his customers and the suppliers he represents. Through a wide variety of contacts, for example in the chemical and food industries or the building materials industry, he has been able to gather valuable knowledge over many years in the field of test sieves, industrial sieves and screening surfaces. We at Rhewum gmbH are sure that our customers and prospective clients are in competent hands with Joachim Edinger Industrievertretungen and will benefit from his many years of experience. We are looking forward to our future cooperation.
13-02-2020  |  11666  |  press release  | 
Continue reading
New: Compact chain conveyor  Compact chain conveyor for 0 to 20 m3 per hour
New: Compact chain conveyor
Compact chain conveyor for 0 to 20 m3 per hour The expense involved in explosion-proofing bucket elevators can sometimes exceed the purchase price of the conveying system itself by up to a factor of three. So Poeth Solids Processing, based in Tegelen in the Netherlands, developed the cost-saving Z-Conveyor to eliminate the need for extra investment in ATEX explosion-proofing. The new, explosion-proof Mini Z-Conveyor for gently transporting 0 to 20 m³ of powders, grains or granules per hour is Poeth’s latest development of this concept. The Mini Z-Conveyor features compact design and is especially suitable for indoor use. Explosion-proof conveying prevents high costs for safety equipment Dry, organic materials can generate dust that is explosive by nature. This risk is particularly acute when these products are transported at speeds of more than 1 m/s. Bucket elevators are an excellent solution when products have to be transported vertically. However, these systems only operate effectively at speeds above 2 m/s.…
10-02-2020  |  11890  |  product news  | 
Continue reading
Bar any confined space opening to increase safety
Bar any confined space opening to increase safety
Increase safety for almost any confined space by completely covering its opening with a physical barrier andsafety message. 8 types of Confined Space Safety Covers are now available from Brady Corporation. Increase confined space safety Confined spaces can be difficult to get out in a hurry. This makes them an increased safety risk. Rights to enter a confined space are usually very limited and part of a larger safety procedure to avoid accidents. With Brady`s new Confined Space Safety Covers, openings to almost any confined space can be covered completely with a physical barrier to deter entrance. A warning message is added to warn coworkers for the safety risks involved. Easy to use 8 types of Confined Space Safety Covers enable barring almost any confined space opening. Options include lockable or unlockable, elastic, magnetic or velcro fit, and a solid or ventilated design. They are much easier to apply than typically used warning tape, and they can easily be…
07-02-2020  |  11185  |  product news  | 
Continue reading
Leading-edge technology for bulk solids As a new era in bulk goods dawns, find inspiration at trade shows Solids & Recycling-Technik
Leading-edge technology for bulk solids
As a new era in bulk goods dawns, find inspiration at trade shows Solids & Recycling-Technik (Dortmund) The demands placed on technologies for processing modern bulk solids are constantly rising. Today’s strategies no longer focus strictly on increases in efficiency and the careful consumption of energy and resources: Given the ubiquitous shortage of skilled workers, it has become critical to fortify processes in order to protect people, the environment and production plants. On 1 & 2 April 2020, the trade show Solids & Recycling-Technik Dortmund will address these and other challenges faced by industry – both today and tomorrow. Throughout the exhibition and in technical lectures, numerous experts will engage the visitors to encourage the exchange of knowledge and spark ideas for tackling a demanding future. The primary issues facing decision-makers in the bulk materials industry are: how to position oneself efficiently and sustainably on the market, and how to defend and maintain that position in future. Against a background of growing shortages in skilled…
05-02-2020  |  13194  |  press release  | 
Continue reading
Rotary valves for aquafeed industry Handle with care
Rotary valves for aquafeed industry
Handle with care A fine collection of 16 rotary valves is ready for shipment to JT electric in the Faroe Islands. This well-known supplier for marine equipment is based in the heart of the harsh and demanding environment of the North Atlantic. They take advantage of this unique situation to make some of the world’s best products for the aquaculture industry. When designing their custom made feeding barges for fish farming, JT electric use TBMA rotary valves for the dosing and transport of the fish food. With the increasing growth of saltwater fish farms, the demand for automatic feeding systems is also increasing. The fragile expensive high-quality feed must end up in the water undamaged. Every single pellet must be handled gently to avoid breakage and crumbling. Therefore, the Tbma hgrd200 blow-through valves are equipped with an adapted rotor, ensuring that the product is transported and dosed with minimal damage. The valves give high value for money and are of a robust and reliable…
03-02-2020  |  2649  |  product news  | 
Continue reading
Archive by month:
PORTALS
✓ BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
About, ContactDisclaimerPrivacyAdvertisingControl panel login
Follow us
Linked
Supplier sign in