Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

Archive January 2020

Submit a news item
NEW, loading assemblies for type 350 load cells has Expandet up to 10,000 kg
NEW, loading assemblies for type 350 load cells has
Expandet up to 10,000 kg Modern industrial weighing technology requires accuracy and reliability. The "shearbeam" load cells proved their worth for this. They appear to be robust and easy to install. Moreover the available carrying capacities, from 300 to 10,000 kg, permit their use in almost any application. However, in practice, the excellent characteristics of these load cells are not always the reality. This because an optimal result requires a perfect mounting. Here these new loading assemblies offer security. The stable base plate gives the sensor a perfect surface, a threaded rod makes the weighing unit windproof for outdoor applications and a rubber damper protects the load cell against vibrations and stray and ground currents. You have the choice out of zinc plated alloy steel and stainless steel models.
27-01-2020  |  2316  |  product news  | 
Continue reading
Rotating Drum Magnet & Housing Continuous Self-Cleaning magnet
Rotating Drum Magnet & Housing
Continuous Self-Cleaning magnet Rotating Drum Magnets provide good separation in applications where there is a high concentration of metal contamination or terminating the product flow for cleaning of the magnet is not feasible. Rotating Drum Magnets are designed for continuous self-cleaning of metal contaminants from product flow streams. As product enters the housing inlet, an adjustable feed gate meters the flow of product to the drum face. The drum has a stationary, 180 degree arc, internal magnet, with an outer drum shell that rotates. When product passes over the powerful magnetic field, metal contaminants are attracted to the drum surface where they are safely held on to until the ferrous material passes through the magnetic field where it is discharged to the rear of the drum housing. Cleaned filtered product is discharged to the front of the drum housing. These are commonly used with wood, sand, glass, rubber, powders, and many other applications.
24-01-2020  |  3026  |  press release  | 
Continue reading
Safe handling and storage of bulk materials in ports and on the sea Short Course
Safe handling and storage of bulk materials in ports and on the sea
Short Course 10 - 11 March at The Wolfson Centre for Bulk Solids Handling Technology, Chatham Maritime, Kent UK Take a look at the issues surrounding the safe handling and storage of bulk materials in ports and on the sea. Delegates are given the chance to discuss real life issues and to determine best practice for future developments. 12 March: Optional practical session in the on-site Labs where delegates can test same cargoes under different conditions, to see the potential dangers presented at port by not knowing about the materials before handling/transporting them. Course presentations include: •Ship unloading technologies (Grabs vs CSUs, different CSU technologies) •Conveying technologies (pneumatic vs belt) •Storage and discharge technologies (silos, flat stores, stacking etc) •Loading/unloading control (weighing, controlling ship bending etc) •Rail and road outloading equipment and control •Explosion and fire risks and management (ATEX, fire control and…
21-01-2020  |  2671  |  product news  | 
Continue reading
CenTrax belt tracker puts conveyor belts with garland roller
CenTrax belt tracker puts conveyor belts with garland roller
A cement factory in the United Kingdom was experiencing a lot of problems due to a 1200 mm wide conveyor belt, fitted with 5-part garland roller pairs, mistracking. The installation was fitted with tracking systems that were not performing correctly. CentTrax engineers were able to design a custom-made solution. The design, with a CenTrax S-1200 belt tracker as the framework, is based on the existing CenTrax load carrying and return strand tracking systems. For many years, these systems have proven to be effective under the most arduous conditions. Unlike the standard CenTrax three-roller tracking systems, the S-1200-5V-P has five rollers (two tapered and three flat rollers). These five rollers have the same trough shape as the garland roller pairs. Swivel bearing Contrary to the mounted tracking systems, CenTrax has only one pivot point, also known as a swivel bearing. The swivel bearing is fully sealed and unaffected by moisture, dust and dirt. The robust bearings…
20-01-2020  |  3284  |  press release  | 
Continue reading
LUM trains the worldwide sales experts on the new particle measurement devices and looks optimistically into the future
LUM trains the worldwide sales experts
on the new particle measurement devices and looks optimistically into the future From January 27th to 29th the International Sales Meeting will take place at the headquarters of LUM GmbH in Berlin-Adlershof for the 21st time in a row. The sales experts of the LUM companies from Asia, Europe and North America exchange technical information with external sales partners from all over the world. This is where the foundations for the continuing growth of LUM GmbH in the next few years are laid. After reviewing the repeatedly very successful year 2019, the expansion of the product portfolio will form the focus of training in 2020. ”In 2019, we succeeded in increasing sales by 8.6 % compared to 2018, thus continuing the growth trend of recent years. Even regional difficulties such as Brexit uncertainties in the UK and trade disputes between the USA and China have not affected LUM as an export-oriented company globally. In 2020 we are working hard to consolidate our successes and are optimistic, regardless of forecasts for international economic development”,…
16-01-2020  |  10869  |  press release  | 
Continue reading
Moisture Control with IR3000
Reduce Waste and Energy Costs Moisture is important in any manufacturing process, but when it comes to powder & bulk solid processing, excess moisture can ruin products. And what is worse than a wasted effort? Economical losses and decreased productivity. With continuous online moisture measurement, manufacturing/processing plants will find huge money savings. From savings in transportation due to weight of excess moisture, to savings in water usage for dust suppression and clean-up, plants also reduce the amount of wear and tear on equipment due to the dust and ash build up and prevent blockages on the conveyor resulting in shutting down the boiler. Moisture measurement and control can: •Reduce dryer usage and energy costs •Proper control of the in-feed and dryer exit •High Quality Product Through Instant Accurate Moisture Control •Consistency of your final product •100 percent product inspection •Dust and fire elimination •Reduce purchase costs from water weight •Plant production…
13-01-2020  |  11272  |  product description  | 
Continue reading
Hygienic Screening Update JEL Fix becomes JEL Fix II
Hygienic Screening Update
JEL Fix becomes JEL Fix II The JEL Fix round screen is now available in a new variant which is not only more hygienic, but also convinces with better usability. The popular JEL Fix round screen is predominantly used as a protective screen for the separation of coarse fractions. Thanks to its slim and compact design, the new vibration screening machine easily finds space even in cramped production halls and can be integrated directly into a system without the base frame if required. In order to meet the growing demand for high-quality and hygienic screening solutions, Engelsmann now offers the new JEL Fix II, which convinces with easier cleaning and complies with the usual hygienic design criteria. Avoiding surfaces where product may accumulate and dead spaces, as well as easy accessibility of all parts for cleaning purposes, was the top priority in the redesign of the screening machine. In order to meet this requirement, the oscillating frame of the JEL Fix II is made entirely from stainless…
13-01-2020  |  12163  |  product news  | 
Continue reading
Telescoping Loading Spouts Handling Feed Ingredients
Telescoping Loading Spouts Handling Feed Ingredients
A Feed Mill contacted Vortex to help them control material dust in their facility. They were using a method where material would free-fall into the individual retaining areas, creating a massive dust storm and potential employee health issues. A wheel loader transports the feed ingredients from the stockpile to a mixer. From there, the material is pelleted, bagged, and stored on pallets ready for shipments. Vortex supplied six telescoping loading spouts for the Feed Mill. Each spout is 508 mm across and equipped with double layer, trapezoidal shaped dust skirts that encompasses the peak of the material pile – containing the dust as material is stockpiled. An external tilt probe signals the Auto-Raise System and manages the spout’s retraction process (keeping the dust skirt on the material and preventing material build-up in the spout) as the pile grows.
13-01-2020  |  12337  |  press release  | 
Continue reading
Highly reflective signs bring safety in the dark Brady`s highly reflective ISO 7010 safety signs greatly increase safety in dark places
Highly reflective signs bring safety in the dark
Brady`s highly reflective ISO 7010 safety signs greatly increase safety in dark places Brady`s highly reflective ISO 7010 safety signs greatly increase safety in dark places. They reflect twice as much light when lit with a torch or vehicle headlights and can be used both in- and outdoors. Highly visible Reflective signs from Brady are highly visible because they reflect light back without blinding thanks to their retroreflective prismatic sheeting. In general, they are twice as reflective as signs with standard glassbead retroreflective sheeting. This will enable coworkers to better see the signs in dark and harsh weather environments when lit with a torch or vehicle headlights. Great for outdoor use Reflective signs are available on aluminium boards for outdoor use. These boards feature double bended sides and do not have any sharp edges. They are available in round, triangular, square and rectangular shapes to fit any ISO 7010 safety sign shape. Every board is also available with round or square poles in different lengths, with brackets or base plates…
09-01-2020  |  3083  |  product news  | 
Continue reading
ACHEMA 2021 with a new look and new focus themes More modern, more interactive and always at the pulse of the process industry
ACHEMA 2021 with a new look and new focus themes
More modern, more interactive and always at the pulse of the process industry A year and a half before the 33rd ACHEMA opens its doors, preparations are already in full swing. This also includes the identification of three focus topics that will shape the industry as a whole affecting all exhibition groups. For the 2021 edition these are - Product and process safety The increasing use of Internet of Things (IoT) devices in plant operation and production puts IT and cyber security at the top of the agenda. Cyber attacks are becoming more frequent. The interplay between the physical and virtual worlds must therefore be secured. Weak spots along the entire value chain have to be evaluated and eliminated, from the procurement of raw materials to the recycling of products at the end of their useful life. - The digital lab It’s in many cases still a long way to go before intelligent digital workflows will be implemented in a fully networked laboratory. The minimum basis is the construction of a powerful IT environment and fully integrated devices;…
09-01-2020  |  9718  |  press release  | 
Continue reading
Safe loading of bulk goods in explosive atmosphere MOLOSroto rotary paddle level indicators approved for zone 20 offer new opportunities
Safe loading of bulk goods in explosive atmosphere
MOLOSroto rotary paddle level indicators approved for zone 20 offer new opportunities There are principally two kinds of loading bellows. Beside the loading bellows for closed loading of dusty bulk solids into trucks or wagons with filling holes there are systems for the open loading of bulk solids onto trucks, wagons, ships or heaps. During the open loading of potentially explosive bulk solids it could happen, that the complete MOLOSroto sensor is located in zone 20. One example are large loading systems for ships with a loading capacity of 2.000 m3/h and a height difference up to 50 m. In this loading bellows three MOLOSroto level indicators are required for the control of the discharge header and they are mounted completely in zone 20. The rotary paddle level indicator MOLOSroto DF21 approved for zone 20 offers the designers of loading systems new opportunities. With this approval the complete sensor including control unit can be mounted in potentially explosive atmospheres of zone 20.
09-01-2020  |  11655  |  product description  | 
Continue reading
Learn how to tackle your bulk materials handling issues Short courses
Learn how to tackle your bulk materials handling issues
Short courses Bulk materials behaving badly If you are experiencing handling issues with your particulate materials, one or more of our February short courses could help you find out why and how to resolve them. Issues such as segregation, caking /lumping, particle damage and irregular discharge / flow stoppages are all covered in at least one of the following courses: Measurement of the Properties and Bulk Behaviour of Particulate Materials; 4 February 2020 You will learn about a chosen selection from the following topics: •Particle size measurement techniques •Particle Density (solid and bulk) •Flow property measurements •Moisture uptake •Propensity for Segregation/de-blending •Degradation/friability of bulk through handling systems •Caking/agglomeration of bulk materials in storage •Explosability •Pneumatic conveying properties •Dustiness testing By the end of the course you will have gained an understanding of the range of measurement techniques available…
08-01-2020  |  2798  |  product news  | 
Continue reading
New 4B Catalogues - Elevator & Conveyor Components 4B's new catalogues now available - conveying and monitoring components
New 4B Catalogues - Elevator & Conveyor Components
4B's new catalogues now available - conveying and monitoring components
08-01-2020  |  12265  |  photo reportage  | 
Continue reading
CenTrax goes Down Under Belt trackers for Promet Mining & Metals Australia.
CenTrax goes Down Under
Belt trackers for Promet Mining & Metals Australia. Promet Mining & Metals has been our dealer for Australia since 2018. Employees of the company located in Malaga, a suburb of Perth in Western Australia, have many years of experience in optimising conveyor belt systems. Western Australia, with over 1,000 active mines, is an important mining area in the southern hemisphere. Every day, mined raw materials such as iron ore, gold and nickel find their way onto various conveyor belts that are affected by mistracking problems. So, it’s hardly surprising that CenTrax got off to a flying start in the southern hemisphere. For example, in the first year alone, no fewer than 110 belt trackers were delivered, 52 of which were installed in a nickel mine. CenTrax wishes James Stamelos, Managing Director of Promet, and Raymond Gianoli, General Manager of Promet, and their team every success with their operations.
07-01-2020  |  8788  |  press release  | 
Continue reading
Lanxess increases prices for inorganic pigments Specialty chemical company LANXESS is raising its prices for Bayferrox iron oxide and chromium oxide pigments globally with immediate effect.
Lanxess increases prices for inorganic pigments
Specialty chemical company LANXESS is raising its prices for Bayferrox iron oxide and chromium oxide pigments globally with immediate effect. Specialty chemical company LANXESS is raising its prices for inorganic pigments globally with immediate effect, subject to existing agreements. Quotations will be increased by EUR 150 minimum per metric ton or its equivalent in local currency. In some cases, price increase can be higher depending on product group and production site. Customers will be contacted individually as it applies to their products. The price adjustment is required due to constantly raising raw material and energy cost as well as much higher freight rates. The LANXESS Inorganic Pigments business unit is the world’s largest manufacturer of synthetic iron oxides pigments and a leading producer of inorganic chrome oxides pigments. These products have a track record going back many decades as colorants for building materials, paints and coatings, plastics, paper and other applications. These high-tinting-strength inorganic pigments are produced according to strict sustainability criteria. The…
01-01-2020  |  6192  |  press release  | 
Continue reading
Archive by month:
PORTALS
✓ BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
About, ContactDisclaimerPrivacyAdvertisingControl panel login
Follow us
Linked
Supplier sign in