DustScrape controls the dust at your transfer points

Based on more than 3 decades of know-how in the area of materials handling technology, we have been analyzing critical points in conveyor systems and developing new cost-efficient solutions for improvement and optimization. With this innovation strategy we have been creating unique products like the AirScrape, DustScrape and SpeedScrape. Our new developments are economic and easy to assemble but allow a significant prevention of dust formation, spill and a more careful and efficient belt cleaning at critical sections along the conveyor route and transfer points.

National and international exhibitors present their technologies and solutions for the processing, handling, storage, transport and analysis of powders, granules and bulk solids. Our trade visitors are top decision-makers and buyers searching for specific solutions, and come from processing industries such as mechanical and plant engineering, chemicals, pharmaceuticals, mining, stone and earth extraction, food and feed, metal, glass and recycling. More information you will find in our exhibitor catalogue At the same time, the 6th RECYCLING-TECHNIK Dortmund – Trade show for recycling technologies – will take place. Become part of the business platform in the heart of the industry.

Scrape Tec presents sustainable solutions for all aspects of the transfer point to everyone from engineering, sales and service at the BEUMER Group. We at ScrapeTec in Kamp-Lintfort, were all delighted to have been invited by the BEUMER Group to present our products and solutions. On December 1st at BEUMER HQ in Beckum, globally recognized conveyor system manufacturer was able to set up its own booth, and present Scrape Tec’s sustainable solutions for all aspects of the transfer point to everyone from engineering, sales and service at the BEUMER Group. The inventor, and ScrapeTec founder Wilfried Dünnwald, head of sales Thorsten Koth and the technical employee Alexander Born were available the entire day for all questions relating to the products. The invitation to this presentation had a credible background: AirScrape, and its manufacturer, ScrapeTec became known through a Knauf Group project in Russia. The customer was familiar with the method and, more importantly, the result of the new AirScrape conveyor skirting from other Knauf plants. AirScrape is the world first “active” chute sealing device. They

The Chilean partner of ScrapeTec will present the AirScrape, the unique contactless side seal, at the "Expomin" in Chile. ScrapeTec Partner Dank Consultores will be presenting the AirScrape and other ScrapeTec innovations for dust-spill-free transfer points on conveyor belts at Expomin, the most important trade fair for mining in Chile in Hall 2, Stand J-56 on October 2 and 29, 21. For the first time the company ScrapeTec from Kamp-Lintfort is represented with its products at a trade fair in Chile. The Chilean partner of ScrapeTec will be presenting the AirScrape, the unique contactless side seal, which is continuously installed over the belt for chute sealing without touching it, at its booth at the "Expomin". Some also define the AirScrape as a conveyor belt seal or conveyor skirting. Regardless of how the area of ​​application is described, the advantages are important: no wear and friction, no maintenance, no dust and no spillage - for years. The way the AirScrape works without contact and the TailScrape rear seal ensure that neither dust nor bulk material can escape through

From dust till none: Rich in ideas and low in dust How an innovative skirting performs extremely clean work at conveyor transfer points A typical problem in gypsum and cement production and a real cost factor: At most transfer points, material spillage and dust generation as well as the wear and tear of conventional sealing solutions cause additional work and long-term additional costs. A simple and effective innovation provide an uncomplicated remedy. With the contactless skirting AirScrape®, the developers at ScrapeTec offer a perfect solution that is convincing more and more customers in practice. The company Rump & Salzmann Gipswerk Uehrde GmbH & Co KG with its dolomite quarry in Uehrde has been one of these customers from the very beginning. Scenario: Transfer from rotor crusher to belt. Uwe Schridde, Operations Manager at Rump & Salzmann in Uehrde, describes the situation at the time as follows: "Especially at this transfer point, we had to struggle regularly with problems relating to dust and material loss. There were material spills in the ton range. The spilled material then had to be removed

Scrapetec presents successful a new tracking system against belt misalignment. New to Scrapetec’s range of conveyor components is the PrimeTracker belt tracker, which eliminates problems associated with conveyor belt systems, including misalignment, abrasion, and belt damage. “For optimum performance of a conveyor system, it is critical that the belt always runs straight on the conveyor, without sideways movement. Our new PrimeTracker belt tracker has been designed to automatically guide a conveyor belt back into the correct straight-line position, to prevent costly downtime and component replacement,” explained Thorsten Koth, sales and distribution for Scrapetec. “An advantage of the Scrapetec PrimeTracker is that it is operates in the idling position at all times, unless there is sideways movement of the belt. This system corrects misalignment immediately by guiding the belt back into the correct position, with no damage or abrasion to the belt or tracker. Perfect for reversible operation. “This is unlike conventional belt trackers

Kinder Australia Pty Ltd is adding AirScrape® non-contact side sealing to its range. The AirScrape® Has Landed is the title of the newstory on the website of Kinder, one of the leading providers for conveyor components in the Pacific region. The impressive progress of the AirScrape® with its contact-free and dust-minimizing mode of operation has long been observed by Kinder. They were particularly impressed by the YouTube videos about the use of the innovative conveyor skirting. The AirScrape® as a side seal and the TailScrape® as a rear seal for transfer points effectively complement Kinder’s portfolio in the area of conveyor systems and skirting. With this, Kinder offers its customers in Australia, New Zealand and Indonesia a real innovation in the field of conveyor belt seals, which also promises a high level of cost-effectiveness. In addition to Europe, Africa and America, the AirScrape® will now be available in the Asia-Pacific region. At ScrapeTec Trading GmbH from Kamp-Lintfort in Germany, they are proud to have made a “precision landing”