Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

     

Product news
11.10.2021  |  162x
Share this item

Tracking System new and different PrimeTracker

Scrapetec presents successful a new tracking system against belt misalignment.

New to Scrapetec’s range of conveyor components is the PrimeTracker belt tracker, which eliminates problems associated with conveyor belt systems, including misalignment, abrasion, and belt damage.
“For optimum performance of a conveyor system, it is critical that the belt always runs straight on the conveyor, without sideways movement. Our new PrimeTracker belt tracker has been designed to automatically guide a conveyor belt back into the correct straight-line position, to prevent costly downtime and component replacement,” explained Thorsten Koth, sales and distribution for Scrapetec. “An advantage of the Scrapetec PrimeTracker is that it is operates in the idling position at all times, unless there is sideways movement of the belt. This system corrects misalignment immediately by guiding the belt back into the correct position, with no damage or abrasion to the belt or tracker. Perfect for reversible operation.
“This is unlike conventional belt trackers that slide over the belt surface causing possible abrasion and belt damage - rather than adopting free rotation. Conventional belt trackers, with tapered edges, never idle and are always in a braking mode.

“What’s also notable, is the cylindrical shape and pivot bush that allow this belt tracker to swing and tilt during operation and to always be in full contact with the belt. Added to this, the Scrapetec PrimeTracker has the same peripheral speed over the entire surface of the belt, where traditional crowned rollers have different speeds at the center and edges of the system.”
Other advantages include easy installation, low maintenance requirements, and protection of belt edges and structure of the conveyor belt. A strong corrugated EPDM rubber hose protects this system from dust and sand, while the rubber pivot offers soft suspension of the tracker shaft, ensuring extended service life of the system. This system can be installed in front of every return pulley, above and below the belt. Perfect also in reversible operation.

Company information

Related trade show

More items

The AirScrape® has landed. In Australia. Kinder Australia Pty Ltd is adding AirScrape® non-contact side sealing to its range.
The AirScrape® has landed. In Australia.
Kinder Australia Pty Ltd is adding AirScrape® non-contact side sealing to its range. The AirScrape® Has Landed is the title of the newstory on the website of Kinder, one of the leading providers for conveyor components in the Pacific region. The impressive progress of the AirScrape® with its contact-free and dust-minimizing mode of operation has long been observed by Kinder. They were particularly impressed by the YouTube videos about the use of the innovative conveyor skirting. The AirScrape® as a side seal and the TailScrape® as a rear seal for transfer points effectively complement Kinder’s portfolio in the area of conveyor systems and skirting. With this, Kinder offers its customers in Australia, New Zealand and Indonesia a real innovation in the field of conveyor belt seals, which also promises a high level of cost-effectiveness. In addition to Europe, Africa and America, the AirScrape® will now be available in the Asia-Pacific region. At ScrapeTec Trading GmbH from Kamp-Lintfort in Germany, they are proud to have made a “precision landing”
27.08.2021  |  260x  |  Press release  |   | 
Perfect belt alignment, 360 degrees movement Sensitive correction without any potential for destruction, simple belt centering, the PrimeTracker.
Perfect belt alignment, 360 degrees movement
Sensitive correction without any potential for destruction, simple belt centering, the PrimeTracker. Plant operators know it, the annoying belt misalignment, because it is not rare. It occurs almost inevitably when drums and rollers are not well adjusted and aligned, or when they are worn, transverse forces act due to an asymmetrical task of the conveyed material or uneven belt connections are present and have to be compensated. To solve problems with misalignment on conveyor systems, there are numerous variants of different belt guide rollers that aim for the belt to run straight ahead.With this claim, the so-called PrimeTracker is now also being launched in the German market. Developed by the Swedish engineer Bertil Wahren, this special role has recently been part of the sales program of ScrapeTec Trading GmbH at his express request. The partnership is no coincidence, because the experienced technician Wahren and the specialists from ScrapeTec have been in a lively professional exchange for several years. What both sides have in common is that they leave well-known
16.03.2021  |  690x  |  Product description  |   | 
PrimeTracker with special corrugated hose Longlife Tracking System without maintenance, new PrimeTracker.
PrimeTracker with special corrugated hose
Longlife Tracking System without maintenance, new PrimeTracker. Scrapetec Trading relies again and again on long-lasting products, which should solve the customer’s problems in the long term and maintenance-free. He shouldn’t waste any more thoughts on the subject of spills and dust, instead there is the well-known non-contact and wear-free "AirScrape" conveyor skirting. And that the belt always arrives perfectly guided at the transfer points, there is now the new maintenance-free tracking system, the PrimeTracker in the Scrapetec portfolio. This is designed in such a way that, compared to the known tracking systems, it serves the customer for years without friction, without wear and without maintenance. The core, the PrimePivotBush of the PrimeTracker is protected with a special sleeve that will last for years even against very aggressive materials. Why hard when it can be so easy.
17.02.2021  |  1484x  |  Product news  |   | 
New - PrimeTracker - new belt alignment tracking system Why does the PrimeTracker reacts that fast and works without friction and wear?
New - PrimeTracker - new belt alignment tracking system
Why does the PrimeTracker reacts that fast and works without friction and wear? The PrimeTracker looks the same, but works totally different- Works totally flexible, tilt and swing in all directions, that is the reason that the PrimeTracker react and steers faster, has 100% contact with the belt and works friction and wear free. Fast conveyor belt alignment. More infos, please let us know, or just test the PrimeTracker now.
22.01.2021  |  2262x  |  Product news  |   | 
PORTALS
BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising