The AirScrape® has landed. In Australia.

Maintenance-free conveyor skirtings conquer the mining world

Efficiency at its Best Dust-, spillage- and maintenance-free Conveyor Skirtings supplied from Kamp-Lintfort, Germany conquer the World of Mining Companies whose daily operations include extraction, processing, crushing and screening of materials are familiar with the problems at the transfer points in conveying systems, such as nuisance dust generation, disruptive material spillage, costly belt wear, maintenance work that impedes operation and constant cleaning required. Even conventional chute skirtings or conveyor belt skirtings do not help to overcome these problems. For more than 8 years already, ScrapeTec from Kamp-Lintfort, Germany with its specific products has been providing effective solutions to all these problems. ScrapeTec products as e.g. AirScrape, DustScrape and TailScrape are applied individually or in combination and serve as side skirtings or belt skirtings, for example. They are used by large and small companies - in many countries around the world. Also in Chile and Peru. AirScrape®. Dust-free – worldwide. ScrapeTec Trading GmbH started with the AirScrape as its first product. Wilfried

21.07.2021 | 3434x | Product news | |

Underrated TailScrape

The possibility to close a conveyor transfer point completely. with the new conveyor skirting TailScrape. The problem with the conveyor belt transfer is known. Even if you get the sides and tail of a transfer point closed, the corners are still totally open. The corner where the side seal does not match the tail seal. The combination of the new AirScrape seal skirting with the TailScrape is the perfect solution for your transfer points. The corners are completely closed and the advantage is that the TailScrape also works without contact to the belt, the seals no longer wear and do not need any maintenance. Perfect conveyor skirting solution for your transfer points. Call us and let us suggest a solution.

31.05.2021 | 5665x | Press release | |

AirScrape, the new conveyor skirting for cement plants in Indonesia

The AirScrape is a non-contact concept, meaning no friction, no wear. Transfer points free of dust and spillage, without maintenance. After some mining companies, cement plants and ports had tested the AirScrape, the TailScrape and also the DustScrape for a trial at their conveyor transfers, they now wanted more of that. Non-contact concept The new chute seal impresses with its non-contact concept. Without contact and without friction, the AirScrape conveyor belt seal skirting does not wear out and can thus keep the transfer points free of dust and spillage, without maintenance. The benefits can be seen after just a few weeks, pleasing everyone responsible for the conveyor systems. AirScrape and TailScrape First, the transfer is equipped with the AirScrape and the TailScrape, and then, should dust still escape to the front, the calming zone is extended with the DustScrape. The DustScrape tunnel is completely equipped with a filter cloth and thus only allows the excess air to escape. The fine material remains in the calming zone or on the belt. Deliveries to Indonesia A simple and

12.05.2021 | 4888x | Product news | |

Dustfighter for a clean conveyor transfer point

With AirScrape, TailScrape, DustScrape and the PrimeTracker, Scrapetec focusses to fight against dust, spill and unnecessary work at the conveyor transfer points. Active with the new products on the market since 2016 and with a small team. These are products that work according to a new concept with the aim of making the conveyor belt transfers free of dust and spillage. All without maintenance. The advantages of the AirScrape, TailScrape, DustScrape and recently also the PrimeTracker get around. There is a lot going on here about word of mouth and recommendations, worldwide. World-wide Once installed, you can quickly see the advantages and the opportunity to save time and money. A chute seal that works without contact to the belt and therefore no longer wears out is unique. There is no continent that is not supplied by ScrapeTec. Of course, the maintenance-free conveyor belt seal is the driving force behind it, but in cooperation with the other products it becomes a complete solution that makes the conveyor belt transfers clean and maintenance-free.

30.04.2021 | 4090x | Product news | |

AirScrape conveyor belt skirting, the first installation Case-Study.

Worldwide practical application experience and here the first installation of the first contact free conveyor belt skirting. Since installation nor friction, no wear, no maintenance, no dust, no spillage. Already in 2012, in response to a specific operator requirement, Wilfried Dünnwald, inventor of this technology, developed the prototype of the AirScrape. The conveyor belt skirting system worked perfectly from the first minute, is still reliably in use today and was ultimately a major factor in the founding of ScrapeTec Trading GmbH. The AirScrape systems installed on plants in various industries now protect about 1,000 belt transfers worldwide. Parallel to the interest in these units, the number of contractual partnerships is also growing. Trained specialists are on the road everywhere to ensure installation and service. Here is one selected example: Germany: The solution was perfectly convincing for the operators of a dolomite processing plant, who regularly had to deal with dust and material losses at the transfer from the rotor crusher to the belt. Material spills in the ton range and enormous dust generation were an annoying standard. In addition, there were

27.12.2020 | 4980x | Product news | |

The AirScrape® has landed. In Australia.

Kinder Australia Pty Ltd is adding AirScrape® non-contact side sealing to its range.

Company information

Related trade show

More items