News

With a short time-to-market from product and process development directly to contract manufacturing or your own production plant Meet the Glatt team at Vitafoods Europe 2024 in Geneva at stand L 173 Benefit from bundled expertise in particle design – from the first feasibility test to scale-up, masterbatch and validation of the production process. Glatt offers suitable solutions for almost every requirement. Do you have a product idea but don’t have the right technology? We support you in the manufacture and refinement of solid product formulations for a wide range of tasks: from nano-dispersed powder for high-tech applications, to matrix-encapsulated food supplements and food additives in powder, granulate and pellet form, through to products with defined release of active ingredients. Contract manufacturing or plant design is always preceded by product and process development. The Glatt process experts precisely coordinate formulation and process. This shortens the development time and you can concentrate on your product. You can directly influence characteristics such as particle

Schenck Process will be presenting the CS+ loss-in-weight feeder system at the Battery Show in Stuttgart from 18th to 20th June (Booth B73, Hall 8). The modularly configurable system is specially designed to meet the requirements of electrode production and is suitable for both continuous and batch processes. It fulfils the highest standards of safety, cleanliness and dosing accuracy. The production of lithium-ion batteries is complex. To ensure a high-performance, high-quality product, contamination of the slurry by metallic abrasion and the ingress of air and moisture must be avoided. At the same time, maximum feeding accuracy under challenging pressure conditions and a reliable containment concept are required. The new CS+ loss-in-weight feeder system from Schenck Process perfectly meets these different requirements. CS+ can be customized to meet individual customer requirements. The modular design makes it possible to cover a large feeding range with just one feeder type: CS+ is suitable for small quantities from 30 litres per hour as well as for high feeding capacities of up to 3,000 litres per hour. Schenck

Learn how RHEWUM’s screening technology optimizes the separation of glass fiber reinforced polyamide beads to increase quality and efficiency in material processing. Introduction The industry is continuously faced with the challenge of processing materials not only efficiently and economically, but also meeting the quality requirements of end products. A special focus is on the processing and separation of plastics, especially glass fiber-reinforced polyamide spheres (PA GF). These specialty plastics, enriched with glass fiber, offer improved mechanical properties and are therefore in high demand in many technical applications. Efficient sieving of these materials is crucial for the purity of the end product and thus for the quality. In this context, RHEWUM sieving machines play a central role. Technological progress in sieving technology RHEWUM’s sieving technology is based on long experience and continuous development to meet the specific requirements of different materials. Particularly in the separation of glass fiber-reinforced polyamide spheres, it is essential to achieve precise separation to secure the desired material

Up to three measuring channels with freely selectable measuring ranges in a single housing: this is what the new multiple differential pressure transducer from HESCH offers. All settings on the HE 5413 are conveniently made using the ”EasyTool Controls 4.0” software from AXXERON HESCH electronics. Typical areas of application for the multiple differential pressure transducer are filter and dust extraction technology, ventilation and building technology, valve and flap controls, clean room and laboratory technology as well as extraction systems and supply air monitoring systems of all kinds. In these applications, the pressure upstream and downstream of filter elements or the extraction pressure against the environment is recorded. In this way, a statement can be made about the degree of contamination of the filter or the performance of the extraction fan can be controlled. The multiple measuring transducer is also ideal for monitoring filter systems with three filter stages, such as fabric filters, police filters and carbon filters. The device can be designed for supply networks with 19...30 V DC or for networks with 100...240 V AC. The

The new LRS 422 is a one-side pull-rope emergency stop switch for the bulk solids industry and impresses with many special features. The new LRS 422 one-side pull-rope emergency stop switch not only impresses with its stainless steel housing, but also with its CE, UL and UKCA certificates. The emergency stop device was developed for installation on stationary belt conveyors for bulk materials. Thanks to its stainless steel housing and particularly high sealing against water and dust, it is not only used in seaports, but also in the fertilizer industry, salt production, dairies and in animal feed production. Special features: - Robust stainless steel housing - One-side rope installation up to 1x75m - Adjustment display - Integrated slack rope detection - Safety component in accordance with the Machinery Directive Have we aroused your interest? Please contact us.

Accurate and repeatable measuring the mass flow for all kinds of bulk solids: cement, ore, fly ash, sugar, pigment, granulates, powders, plastics, grain. In the world of industrial processes, accurate and reliable material weighing is paramount for efficiency and productivity. The CO mass flow meter emerges as a trusted solution, catering to a diverse range of materials, from cement and ore to fly ash, sugar, pigment, granulates, powders, and plastics, as well as grain. Mass acceleration for accurate flow measurement One of the standout features of the CO mass flow meter is its exceptional accuracy, boasting the ability to weigh materials with a precision of 0.5% within the range of 40-100% of its maximum capacity. The flow scale uses mass acceleration instead of gravity to weigh, and can weigh traditionally difficult material, especially ones with fluctuating densities. Versatile capacities and unparalleled repeatability The CO mass flow meter is designed to handle a wide spectrum of capacities, ranging from 1.000 kg/h up to 100.000 kg/h. This versatility makes it an ideal choice for industries with diverse

The use of adhesive brackets when retrofitting vibrators and knockers on bulk goods containers reduces downtimes and protects containers. Vibrators and impactors are mounted on U-profiles, mounting brackets or metal plates (weld-on plates) for loosening, separating, compacting and sieving powders, granulates or pellets. In this way, containers and pipes are emptied and their walls cleaned, product blockages are dissolved and bulk material bridges are destroyed or, at best, avoided from the outset. To guarantee these effects, suitable fastening elements must already be taken into account during system planning and subsequent construction. However, problems always arise in the not infrequent cases where a need for vibration technology subsequently arises (new bulk materials, changed recipes, etc.) and no suitable fastening options have been provided on high-quality systems (e.g. made of stainless steel). Welding, on the other hand, is not an optimal solution in retrospect, because on the one hand the surface quality can deteriorate, especially with thin-walled containers, hoppers or pipes, and there is