Tripod-based measurement of bulk solids with TILAS3D
Volume measurement of bulk solids at any location
Our TILAS3D tripod-based measuring system is suitable for measuring bulk solids outside of defined areas. Unlike stationary fixed scanning systems, our tripod-based system can measure bulk solids at any location and with high accuracy.
The scanning system is placed on or next to the material to be measured. Depending on the situation, several scans may be necessary until all surfaces have been captured. Our intelligent projection system ensures that the individual scans can be combined with little effort.
The scan data is projected in the same direction in which the scanner ”looks” at the material. Missing areas within scanned surfaces can be calculated by the software using interpolation.
Once all scans have been combined, the volume of the bulk solids can be calculated. To do this, click on any position on the scan surface to determine the height of the reference plane. It is also possible to create an inclined plane or any other geometry as a reference in the software editor.
The processing area of our software is 50 x 50 meters. The range of the laser system is 70 meters. The built-in tilt sensor has an angular resolution of 0.01° and ensures sufficient accuracy even at larger scanning distances. The scanning speed as well as the scanning method can be adjusted depending on the conditions.
Our application software is part of the system and can be used for an unlimited period of time. It is not a subscription model with recurring costs.
To familiarize yourself with the system even without scanner hardware, we have integrated a simulation world into the software. All scan variants and evaluations can be carried out virtually in this simulation. Training is also possible without scanner hardware.
Information on our tripod-based measurement system can be found on our homepage.
