Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

       

Press release
12.03.2014  |  12741x
Share this item

Pleated element filter at Reagens commissioned

Reagens is a manufacturer of special chemicals for production of PVC and other thermoplastic plastics. In the production location Loxstedt organically based stabilizers are produced among other things. In our everyday life they are hardly perceived, but the special chemicals are essential for the processing of PVC. Only by their use the final products get their required durability.
The up to now used cyclone for the dust removal of the production processes could not any longer fulfil the realisation of lower dust emission values presecuted by Reagens. In lieu of the cyclone Infastaub delivered an aspiration filter of the type Infa-Lamellen-Jet. In spite of small floor space a filter surface of 72 m² could be realised because of the optimised filter geometry. The old fan was substituted with an energy-optimised fan type.
The requirements for the new filter unit were very special. The paraffin containing dust particles are adhesive, waxy and could clog the pleated elements within short time - then a cleaning would not be possible any more. Therefore pleated elements with a laminated PTFE membrane are used. The diaphragm allows a stable dust removal process. Furthermore with this dust kind a danger of explosion is possible. The pleated element filter was therefore designed for a pressure shock resistance of 0.4 bar g. Additional explosion decoupling systems on the raw gas and clean gas side were planned by the customer.
Applications with such edge conditions need a high degree of competence which our engineers have gained from many comparable projects. The outcome of this are filter systems, which guarantee safety and reliability.
Heiko Sievern, head of technical department at Reagens, declares after 4-months operating: „The new filter unit completely measured up with our expectations. After detailed preliminary planning and punctual delivery the high-quality workmanship of the stainless steel filter housing struck us immediately. After 4 months in operation the Infastaub filter unit has proved its efficiency. Dust emissions are far below the target value of 10 mg/m³ and the granulating process sucked off by the filter runs steadily. We will count on the cooperation with Infastaub also for other projects.“
A pleated element filter AJL is exhibited at "Schüttgut 2014" on the Infastaub stand E:07 in hall 4

Company information

Related event

Trade Fair Schüttgut 2014
We hereby warmly invite you to participate in the 6th edition of Solids Dortmund (Schüttgut) and the 2nd edition of Recycling-Technik, both taking place on 21 & 22 May 2014 in the Westfalenhallen in Dortmund, Germany. Dortmund and the Ruhr region provide the ideal backdrop for these two shows: Handling bulk solids has long been an important commercial factor for the area, which is not only Germany’s industrial powerhouse but also one of the biggest and most economically dynamic conurbations in Europe. It is at this crossroads of supply and demand that Solids Dortmund (Schüttgut) and Recycling-Technik offer you a platform for making new business contacts and generating sales leads. The Ruhr’s exceptional urban infrastructure makes it easy to get around and, as a show venue, underscores easyFairs’ basic concept: doing business cost- and time-effectively. In just two exhibition days, suppliers, manufacturers and dealers can meet qualified trade visitors, engage with them in dialogue about specific projects and present solutions from a comprehensive spectrum of solids technologies: bulk goods services, material processing and/or handling, storage and warehousing, and (new in 2014) solids transport. By including multimodal transport systems and solids logistics in its exhibitor scope, Solids Dortmund 2014 (Schüttgut) now covers the entire solids handling process from start to finish. But these are not the show’s only new features! In 2014 the emphasis will be on providing more time and space for exchanges with peers and experts, doing business, and knowledge transfer: A comfortable ambience for business transactions: - Attractive new stand concepts, offered in tried-and-tested ‘all-in’ packages New networking areas: - Business-Bar and VIP & Speakers’ Lounge - Country pavilions – exhibitors from neighbouring EU countries present themselves Focus on content: - Expert lectures and discussions on four stages – and free attendance for all visitors - Integrated trade convention – dialogue and exchange of know-how between science, economy and politics In addition to the national reach it provides via its strategic location in the heart of German industry, Solids Dortmund 2014 (Schüttgut) also serves as an ideal springboard for international networking. Solids Dortmund 2014 (Schüttgut) is one of the Solids European Series shows, Europe’s largest series of trade shows for solids technologies. Together, the show’s five stops – Dortmund, Rotterdam, Basel, Antwerp und Krakow – gather over 900 exhibitors and more than 10,000 visitors in highly industrialised metropolitan areas. For further details, please visit www.easyfairs.com/solids. Extensive and up-to-the-minute information about Solids Dortmund 2014 (Schüttgut) and Recycling-Technik 2014 can be found on our website.
21.05.2014 | Trade Fair | 2 days | Dortmund | Entry: Free (after registration)
PASSED
PORTALS
BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising
FOLLOW US
Linked