Scrapetec Homepage is now available in Spanish

Based on more than 3 decades of know-how in the area of materials handling technology, we have been analyzing critical points in conveyor systems and developing new cost-efficient solutions for improvement and optimization. With this innovation strategy we have been creating unique products like the AirScrape, DustScrape and SpeedScrape. Our new developments are economic and easy to assemble but allow a significant prevention of dust formation, spill and a more careful and efficient belt cleaning at critical sections along the conveyor route and transfer points.

National and international exhibitors present their technologies and solutions for the processing, handling, storage, transport and analysis of powders, granules and bulk solids. Our trade visitors are top decision-makers and buyers searching for specific solutions, and come from processing industries such as mechanical and plant engineering, chemicals, pharmaceuticals, mining, stone and earth extraction, food and feed, metal, glass and recycling. More information you will find in our exhibitor catalogue At the same time, the 6th RECYCLING-TECHNIK Dortmund – Trade show for recycling technologies – will take place. Become part of the business platform in the heart of the industry.

The possibility to close a conveyor transfer point completely. with the new conveyor skirting TailScrape. The problem with the conveyor belt transfer is known. Even if you get the sides and tail of a transfer point closed, the corners are still totally open. The corner where the side seal does not match the tail seal. The combination of the new AirScrape seal skirting with the TailScrape is the perfect solution for your transfer points. The corners are completely closed and the advantage is that the TailScrape also works without contact to the belt, the seals no longer wear and do not need any maintenance. Perfect conveyor skirting solution for your transfer points. Call us and let us suggest a solution.

With AirScrape, TailScrape, DustScrape and the PrimeTracker, Scrapetec focusses to fight against dust, spill and unnecessary work at the conveyor transfer points. Active with the new products on the market since 2016 and with a small team. These are products that work according to a new concept with the aim of making the conveyor belt transfers free of dust and spillage. All without maintenance. The advantages of the AirScrape, TailScrape, DustScrape and recently also the PrimeTracker get around. There is a lot going on here about word of mouth and recommendations, worldwide. World-wide Once installed, you can quickly see the advantages and the opportunity to save time and money. A chute seal that works without contact to the belt and therefore no longer wears out is unique. There is no continent that is not supplied by ScrapeTec. Of course, the maintenance-free conveyor belt seal is the driving force behind it, but in cooperation with the other products it becomes a complete solution that makes the conveyor belt transfers clean and maintenance-free.

Worldwide practical application experience and here the first installation of the first contact free conveyor belt skirting. Since installation nor friction, no wear, no maintenance, no dust, no spillage. Already in 2012, in response to a specific operator requirement, Wilfried Dünnwald, inventor of this technology, developed the prototype of the AirScrape. The conveyor belt skirting system worked perfectly from the first minute, is still reliably in use today and was ultimately a major factor in the founding of ScrapeTec Trading GmbH. The AirScrape systems installed on plants in various industries now protect about 1,000 belt transfers worldwide. Parallel to the interest in these units, the number of contractual partnerships is also growing. Trained specialists are on the road everywhere to ensure installation and service. Here is one selected example: Germany: The solution was perfectly convincing for the operators of a dolomite processing plant, who regularly had to deal with dust and material losses at the transfer from the rotor crusher to the belt. Material spills in the ton range and enormous dust generation were an annoying standard. In addition, there were

The new conveyor belt skirting, the AirScrape runs on high performance 12 months now. The mine confirmed and appreciate, the high cost savings and the clean dust free working places at the conveyor belts. A new user, operator of the processing plant of a large mine, had to readjust the conventional conveyor skirting at belt transfer points every 2 weeks and replace them completely every 4 months, causing enormous downtimes and costs of the equivalent of € 240 000 each. The plant managers hoped to stretch these cycles. They discovered the AirScrape at the Perumin 2019 trade fair and decided to test the conveyor skirting at one of the most critical transfers at the highest point of the plant. From there, dust not only trickled into the entire plant, but was also carried by the wind in the direction of the lower situated nearby village. After the test installation of the AirScrape of 10 m per side of the conveyor, the effectiveness was immediately apparent. Only 2 weeks later, the main manager approved a large AirScrape order. In the meantime, elements for 150 m (both sides) have been purchased to convert a total of 5 belt transfers to AirScrape. Furthermore, there are

No wear, no maintenance for months/years The mining industry in Peru relies entirely on the AirScrape. There is no more wear and tear, dust or spillage. Employees can concentrate on the essentials in a clean environment. See attached video before and after, Health and Safety. In addition, the downtimes could be reduced dramatically. In the past, the conveyor belt skirting had to be readjusted or replaced every 14 days. Thanks to AirScrape, this maintenance work is no longer necessary and the system can run through. It also works for all other bulk handling industries like Cement, Gypsum, Lime, Glass and more. For more infos, send us a mail.