FRITSCH is one of the internationally leading manufacturers of application-oriented laboratory instruments for sample preparation and particle sizing. Here a short view of the Fritsch instrument ranges: - Mills for crushing, micro-milling, mixing, homogenising of hard-brittle, fibrous, elastic and or soft materials dry or in suspension - Instruments for particle sizing according to static laser scattering, dynamic image analysis and sieving - Laboratory Instruments for representative dividing of dry and wet samples as well as for controlled sample feeding Laboratories worldwide count on our quality and experience – for the fast industrial application as well as for the especially accurate research technology applications in the industry- and research laboratories. Convince yourself.

Now with a new optical design - simple operation – fully automatic measurement! With the FRITSCH Laser Particle Sizers ANALYSETTE 22 NanoTec particle measurement becomes a simple matter, for professionals as well as for any employee – in production and quality control or in research and development. No prior knowledge is required. Just start the programme, select a SOP and add the sample – the rest takes place completely automatic. Fast. Reliable. Efficient. New optical design The very large measuring range of 0.01 µm up to 2100 µm of the ANALYSETTE 22 NanoTec results from the combination of two lasers with two different measuring cell detector spacings: Large particles are detected using an infrared laser with a large distance to the measuring cell, for small particles a green laser with a small distance to the cell is used, which permits the detection of the forward scattered light up to a scattering angle of 65°. The measurement of smallest particles down into the nano range is performed by the green laser light for backward scattering.…

ANALYSETTE 28 ImageTec and ImageSizer! Both models of the Particle Sizer ANALYSETTE 28 ImageTec (wet measurement) und ImageSizer (dry measurement) are ideal for all applications where not only the particle size is measured but especially reliable statements about the particle shape are of importance. Via the optical analysis of particle shape and particle size, damaged particles, contaminates, agglomerates and oversized or undersized particles are identified accurately and fast, and can be viewed as single images. At the same time, the instrument offers a fast and efficient particle size measurement. The measuring time depending on the sample quantity, is under 5 minutes and the result is available immediately. This makes the ANALYSETTE 28 the perfect measuring instrument for the easy quality control, as well as for research and for laboratory tasks – and it is the fast alternative to sieving. Fast analysis of particle shape and size - Extra-wide measuring range, individually adjustable - High-performance…