A Wallace & Tiernan paste slaking system installed in 1995 had become obsolete, with no spare parts available. Processing 210,000 tons of waste per year for ~720,000 people, the facility relies on an advanced flue gas treatment system where lime slurry neutralizes acid gases. The challenge: A Wallace & Tiernan paste slaking system installed in 1995 had become obsolete, with no spare parts available. Sodimate Deutschland GmbH designed a targeted retrofit, preserving existing tanks and pumps while upgrading key components: * silo discharge and dosing systems * lime slaking units * water dosing systems * Brother washers During installation, a mobile plant ensured continuous lime slurry supply, avoiding downtime. The result: * smooth operation of both lines * stable lime slurry production (~2,700 L/h) * improved reliability and long-term maintainability This project proves that aging installations can be modernized efficiently and sustainably.

Sodimate designs, supplies and installs dilution tanks for lime/chalk milk, soda solution, powdered activated carbon slurry and other solutions and suspensions in the sewage treatment and flue gas cleaning sector The tanks are made of PPH/PEHD as standard (alternatively also made of steel or stainless steel) and are equipped with an agitator mixer, level sensor indicator, a water dosing panel board and the necessary connections for pumping, emptying, lime milk ring line, etc. Depending on their size, the dilution tanks have 1 - 3 flow breakers, a 24-hour agitator and a vent with spray nozzle, essential elements for good homogeneity of the suspension or solution and to prevent deposits on the tank wall. The mixtures are then conveyed to the respective consumption points using pumps. The advantages: * Tank can be modulated as required and is available in any size between 500 litres and 10,000 litres * Integration of the tank within a complete ‘turnkey’ system * 100% dust-free, as the system is hermetically sealed * Tank specially optimised for hydrated lime, can be customized according to the requirements for other products such as soda, bentonite, etc. * Low maintenance…

Lime milk preparation plants as part of the modernization of the water treatment system For a recent project in Poland, Sodimate and Equimo, official Polish distributor, were solicited to equip two complete lime milk preparation plants at Grupa Azoty S.A. in Tarnów as part of the modernization of the water treatment system prepared and implemented by ste AQUA SEEN Sp z o. o. These plants were built for one of the main players in the Polish fertilizer market, and a key player in the European chemical industry. The company’s products are used in agriculture, as well as in the food, automotive and electrical engineering industries. As a technical expert, Sodimate has supplied: * 2 discharge and metering system of hydrated lime installed under 130m3 silos, ensuring continuous powder flow and dosing * 2 injectors isolating screw feeder from moisture * 2 preparation tanks of 3m3 and 10m3 for mixing and preparing lime milk slurry, essential for industrial water treatment Lime milk preparation aims to correct water pH, precipitates heavy metals,…

Major contribution to the production of lithium hydroxide monohydrate, a critical step in the supply chain of lithium-ion batteries, that are indispensable for electric vehicles and various technological applications. The comprehensive Sodimate project includes the following installations: A complete quicklime slaking system * A discharge and metering system under a 60m³ silo, ensuring efficient material flow * A dosing unit and conveyor for precise material handling * A 12 m³ slaking tank, mounted on load cells for precise control and measurement * A 20 m³ lime milk storage tank, designed for optimal containment and processing An installation for discharge and conveying of quicklime * A 25 m³ recycled lime silo, ensuring seamless integration with the slaking process * An advanced feeding system to supply the slaking tank effectively A lithium carbonate preparation system * A discharge unit, enabling smooth material flow * A dosing system for accurate preparation * A 10 m³ lithium carbonate preparation tank, engineered to dose and prepare this essential component for the production of lithium hydroxide monohydrate (LiOH·H₂O). For more information, please…

The ZDM 400 is a mechanical discharge and dosing device for powdery bulk solids or granulates stored in silos. Unique, reliable, low-maintenance and very precise. The ZDM 400 is a mechanical discharge and dosing device for powdery bulk solids or granulates stored in silos. In addition to ‘classic’ products in the environmental sector such as quicklime, lime hydrate or calcium carbonates, the discharge and dosing units are also particularly suitable for difficult products such as pre-ground sodium bicarbonate, soda or powdered activated carbon. More than 200 different products have already been successfully discharged and dosed from silos with the ZDM 400. More than 5,000 of these devices are in use worldwide, some of them for decades.

SODIMATE supplied silo dosing and conveying units for demonstration plant for phosphorus recovery for the AMPHORE project in Bottrop Sodimate Deutschland GmbH has supplied a silo system for discharging, dosing, weighing and conveying sewage sludge ash for the AMPHORE project in Bottrop - regional sewage sludge and ash management for phosphorus recycling: - 3 silo discharge and dosing systems - 1 intermediate container designed as a weighing container - Several screw conveyors - 1 injector for conveying the sewage sludge ash into an on-site reactor filled with acid. The system has been in operation for several months and is running smoothly.

Innovative and reliable silo discharge and metering unit "ZDM 400" from Sodimate. Advantages due to modular design. A second metering line can be added. Unique, reliable, low maintenance and very precise: Our DDS 400, ZDC 400 and ZDC 800 discharge and metering units have been the bestsellers in the comprehensive Sodimate portfolio for over 40 years. Over 5000 of these units alone are in use with our customers worldwide. Based on the tried and tested principle, a new generation of discharge and metering units has now been developed, the ZDM 400. Our customers’ wishes and suggestions have also found their place in the well thought-out optimisations. Main advantages of the new ZDM 400: - The modular design: It allows the metering screws alone to be replaced without having to replace the entire unit. This means that a completely different metering capacity can be realised by simply replacing the existing metering unit with a metering screw with a larger or smaller diameter. - It is now also possible to add a second metering line at a later date. Each metering line can be equipped with an individual shut-off…

The Sodimix is a patented powdered activated carbon (PAC) dust absorption system that eliminates dust created in dry-to-slurry processes. The filtration system is completely dust free, without product loss and can be easily mounted on existing dry-to-slurry processes. The Sodimix is applied mainly as additional equipment for preparation tank to the production of activated carbon suspension. This activated carbon suspension is used in the area of the drinking water processing as well as in flue gas cleaning.