The Patented CCD-Compact Cyclonic DeDusting System Due to high costs of virgin resins, Plastic Processing Companies use more and more valuable regrind. Pelletron developed a new compact and economical regrind recovery system with extremely high cleaning efficiency. The core element of the system, the DeDuster, removes resin dust, streamers, metal dust, dirt, paper, and other contaminants. The contaminants are separated from the air in a high efficiency cyclone. The removed contaminants will be collected in a dust drum under the cyclone. The full dust drum can be changed without interruption of the operation. The cleaning air will be returned to the DeDuster, after passing through an inline filter. The system was designed to clean very high contaminated regrind efficiently. Regrinds with dust loads of 20% and more will be cleaned to dust loads below 1%. Low investing costs, and low service costs provides fast return on investment. Recyclingsystem is simple to operate and easy to maintain. What’s new? • System…

Elimination of angel hair (streamers) and elbow wear Pelletron introduce a unique and patented conveying pipeline elbow that is trade named the Pellbow™. It is especially designed to minimize damage caused when solid particles are injected into a high velocity conveying system — the higher the velocity, the more dust and streamers are formed in elbows. Design Principle: The Pelletron design creates a streamlined pocket shape by enlarging the bend at the incoming point in order to produce a soft layer of pellets just before they impact the angular target zone. The resulting soft layer of pellets will deflect incoming pellets toward the outlet, thus minimizing product degradation and wear of the Pellbow™. Advantages of the new Pellbow™ design include: Elimination of streamers, reduction of dust, wear resistants when conveying abrasive products, due to the gentle changing of direction in the piping system. The special designed shape, called Bernoulli pocket, makes the Pellbow™ 100% self-cleaning when the…

New dedusting series from Pelletron Pelletron introduces the new XP-Series DeDuster Pelletron’s XP-Series DeDuster is the most compact DeDuster available in various sizes for discharge capacities from 500kg/h to 100,000kg/h. The DeDuster separates particles as small as one (1) micron as well as long streamers or paper contaminants. The system is ideal for all kind of granular products which needs to be cleaned before packaging, shipping or processing. What’s new? 1. 50% height reduction! The already low height of the DeDusters was cut in half to reduce the installation height 2. 100% increase of the cleaning area! The surface of the cleaning decks was doubled to increase the cleaning efficiency and through put. 3. Energy saving! The air consumption was reduced by optimizing the air distribution design 4. Venturi effect! The new designed venture zone increases the Venturi effect and reduces the carry over to an absolute minimum DeDusters has helped many customers earn a return on…

For reduction of the velocity and increase of the flow rate Pelletron, Lancaster, USA-based bulk material handling company, introduces its new, patented FlowEnhancer, which increases the capacity and reduces the conveying velocity of pneumatic transfer systems. Existing systems can be optimized without changing the conveying line size. Pelletron’s unique design ensures easy retrofit into existing systems and is upgraded by Pelletron’s pneumatic conveying expertise and outstanding performance. Design Principle: A special designed blow-off pipe section reduces the conveying air, controlled through an air management system. After filtration of the air, it will be released to the atmosphere.

For pressure range from 1 to 3.5 bar, with new inlet design Used in gravity or pneumatic conveying applications for granular products. Available in a low pressure version with a differential pressure of 1bar and a high pressure version for 3.5bar. Valves are designed in stainless steel and available in sizes 100 to 500 mm. Main features: • Patented anti shearing device • Double lip seals • Integrated leakage air vent for best filling efficiency • Closed end rotor • Up to 250 Degree C available • Polishing available • Many more options available on request

Modular valve with various pipe angles Pelletron Introduces new Ball Type Diverter valve DVB The new Ball Diverter is suitable for powders and pellets, Because of its modular design, the valve can be used for flow directions of 45, 90 and 135 degrees. The valve is designed in stainless steel, and available in sizes 1 ½” to 12” (40mm to 300mm). Main Features: • Full round passway design • Ball completely sealed • Differential pressures 60 psi (4 bar) • Surge pressure 90 psi (6bar) • Heavy duty pneumatic actuator • High temperature version available

Dust and streamer removal in one machine Pelletron Introduces Redesigned DeDuster With 30 000 kg/h Capacity Pelletron Corporation, the pioneer in DeDusting technology, has redesigned its Pelletron P-600 DeDuster, a dust and streamer contaminant removal system designed for large applications in plastics manufacturing and other chemical industries. The new P-600 has the capacity to dedust up to 30 000 kg of material per hour and complete the max size series of DeDusters. The new P-600 features a split design, which creates a low profile for easier retrofitting in limited headroom application facilities. The split design means the P-600 has four, larger air wash decks, two patented Venturi chambers, and two patented flux field generators. The dual Venturi chambers and larger air-wash decks provide more precise control of the airflow, allowing for a wider variation of flow rates, resulting in quicker, more efficient DeDusting. Design principle: In the split design of the P-600, dust and streamer contaminated…

To avoid streamers and for abrassive products Pelletron to Unveil Revolutionary New and patented Pellbow™ Pelletron, the Lancaster, PA-based bulk material handling company, will showcase a unique and patented conveying pipeline elbow that is tradenamed the Pellbow™. It is especially designed to minimize damage caused when solid particles are injected into a high velocity conveying system — the higher the velocity, the more dust and streamers are formed in elbows. Design Principle: The Pelletron design creates a streamlined pocket shape by enlarging the bend at the incoming point in order to produce a soft layer of pellets just before they impact the angular target zone. The resulting soft layer of pellets will deflect incoming pellets toward the outlet, thus minimizing product degradation and air pressure resistance. Advantages of the new Pellbow design include: Elimination of streamers; reduction of dust; handling of abrasive products and the gentle changing of direction in the piping system.…