Categories

Anval Rotary Feeders and Air sluice Valves, Anval Rotary Feeders and Air sluice Valves

stainless steel ”quick-clean” rotary valve for sale at Surplus Select product contact parts of stainless steel 316, ”quick-clean” valve execution, air purge shaft seals, the rotor can be easily and safely taken out of its housing and turned manually, this makes it simple to do an inspection or clean (wet) the rotor at all sides, inlet and outlet 250 mm, installation height 450 mm (flange/flange) Product no.: 23.192A2821 Visit our website for a complete overview of our used machinery in stock. Surplus Select is partner for the fluids and solids processing industry in CSR/re-use.

To meet the demand for rotary valves with a larger capacity, VDL Industrial Products has introduced the HT-450. This HT-450 Rotary Valve offers possibilities for applications under cyclones or for separators and is optimally applicable in situations in which in particular larger parts (for example, shredded particles from plastic or wood) should be transported. The HT-450 has a gross capacity of about 35 liters/revolution and combines simplicity and ease of maintenance with robustness. This valve has a cast iron housing and is equipped with a rotor with 8 chambers, ball bearing shaft and a direct-mounted flanged gear motor. By default, the HT-450 rotary valve is equipped with a steel rotor with steel or Vulkollan blades, a gear motor 1.1kw with 25 revolutions/minute, brand: NORD or SEW and is painted in the colour RAL 5009. Also in this new model, we offer tailor-made options and versions, such as various treatments of the housing and different drive possibilities.

For discharging and dosing of bulk goods from silos or supply hoppers. Can be used in dust explosion-endangered systems by means of inlet/outlet-mounted shut-off valves with flameproof and pressure shock-proof design, and DMT certificate. Can be used as safety unit for dust-explosion proof decoupling, even for highly abrasive media, by means of inlet/outlet mounted shut-off valves with pneumatically actuated sealing elements APS ®. Logical sequence control ensures that only one shut-off valve is open while the other shut-off valve is gas-tight closed.

The Rotor Interference Detection (RID) system can be installed to minimise damage to the rotary valve and warn of possible contamination of the conveyed product in the unlikely instance of the rotor fouling the valve body or end covers. Regardless if the RID system is employed on an easy detachable valve with or without supporting rails, our valve remains easy detachable. By isolating the rotor from the body and end covers, the electrical resistance can be monitored. When a change in resistance takes place due to contact, this will be signalled and the drive should immediately be stopped. The direct drive execution is isolated by the coupling which has a plastic spider. The chain drive is isolated from the motor base plate and the body. The contact points for electrical connection are at the drive end and on the end cover / body. This monitoring is done with an isolated switch amplifier. This will give an instant output signal in case of any contact between the

For use in vacuum systems Maximum differential pressure 0.2 bar The Dust Valve DV is designed using the modernist equipment to the practise of to day in the use of dust filtration.The round inlet and outlet with pull-ring connections are fit for use in flanged pipe systems.Due to the low weight the mounting of the valve can be done by 1 person. Low weight Quickfitting for easy mounting(Jacob system) To fit without hoisting equipment 8 Vane self cleaning Polyurethane rotor which has 2 vanes in a sealing position at all time Minimum air loss Available from stock Technical data: For use in vacuum systems Maximum differential pressure 0.2 bar Maximum temperature of the product 80°C Body and cover Aluminium Rotor wear resistant massive polyurethane Economical direct drive from 0.18kW up IP 55,F-isol. 230/400V 50Hz Rotorspeed 23 rpm./min

The 2-way WYE Line Diverter is specifically engineered to handle dry bulk solids in vacuum or dilute phase pneumatic conveying systems with pressures up to 1 bar. The 2-way WYE Line Diverter provides a number of significant advantages over traditional flapper and rotating tunnel style diverters. Trouble spots inherent in these conventional diverters are eliminated with the 2-way WYE Line Diverter, providing superior sealing, low installation weight, fast `in-line` maintenance, and an abrasion resistant design for long-term, reliable service. Adapting the 2-way WYE Line Diverter to your system requirements is made easy with a wide selection of actuators, position indication switches, flanges, and tube stubs and is available in 50mm through 200mm. The 2-way WYE Line Diverter also offers a wide variety of modifications to accommodate high or low temperatures, corrosive, humid, and hazardous environments. The 2-way WYE Line Diverter is versatile and well-suited for many