Depth stop for samplers – helpful accessory for sampling bulk goods
The depth limiter ensures that the zone sampler penetrates to the same depth each time it is pierced and enables standardised sampling
For quality control, samples of bulk materials are taken correctly and reliably with zone samplers. Bürkle now offers a helpful accessory for sampling bulk materials with the depth stop for samplers.
To make a sampling procedure reproducible, it should always be carried out under the same conditions. For this purpose, the depth stop for samplers is a helpful accessory. The depth stop can be clamped to any height of the sampler by means of a C-clamping screw. This ensures that the sampler penetrates to the same desired depth each time it is pierced. The penetration depth is thus fixed and can be precisely recorded, e.g. in a test report or sampling instructions. In addition, the depth stop can prevent accidental puncturing during sampling.
The depth stop for samplers is useful in all areas where the sampling parameters must be precisely determined and defined, e.g. in the outgoing and incoming goods inspection of bulk materials that can segregate.
The depth stop for samplers is placed on a sampling tube with Ø 25 or 50 mm and tightened with an Allen key (5 mm).
