Rotor Weigher RC for continuous weighing or controlled dosage
With the Rotor Weigher FRIEDRICH electronic a large number of poor flowing products can be measured, e.g. flour, shavings, chips, splints, powders, byproducts and bran.
A horizontally aligned rotor is located inside the Rotor Weigher. It is driven at constant speed. The product is fed to the center of the rotor and accelerated to approx. 9 m/s. The occurring Coriolis force is gathered by a torsion spring and captured by a flux induction sensor. The system is completely proportional to the mass flow measurement. Material-specific characteristics such as flow characteristics or friction are not included in the measurement as errors.
Applications:
Continuous weighing of bulk flow for implant control purpose and calculation of extraction
Frequency controlled dosage for production of blends or additives
A large number of poor flowing products can be measured, e.g. flour, shavings, chips, splints, powders, byproducts and bran.
Characteristics
Continuous weighing of poor flowing bulk solids Overview
