The Disk Mill PULVERISETTE 13 classic line is the ideal instrument for fine grinding of up to 150 kg per hour of soft to hard-brittle and temperature-sensitive solids – even in continuous operation. The maximum feed size per piece is approximately 20 mm edge length, the final fineness is freely adjustable between 12 mm and 0.1 mm.
Powerful fine grinding
The material to be ground is comminuted by pressure and shearing action between two counteracting grinding disks with coarse interlocking teeth. The ground material automatically falls down through an output gap into the collection drawer. The desired final fineness can be defined from the outside by changing the gap width.
Your advantages
- High throughput up to 150 kg/h
- Fine grinding down to 0.1 mm
- Grinding disks are available in 5 different materials
- Metal-free grinding with grinding disks made of zirconium oxide and a polymer interior coating of the mill
- Simple operation
- Fast grinding disk change – lengthen the service life of the grinding disks by simply changing the rotational direction
- Precision setting of the final fineness even during grinding
- High service life due to generously dimensioned bearings
Extremely fast and easy cleaning
The grinding chamber of the Disk Mill PULVERISETTE 13can be completely opened which makes cleaning especially simple and the grinding disks are very easily accessible for changing.
Precise gap setting
The precision sliding table of this Disk Mill ensures precise gap setting also during grinding with an accuracy of 0.1 mm. The gap width check is done easily for example with a thickness gauge from the outside – for rapid, precise operation and exactly reproducible grinding results.
An extra PLUS
The Disk Mill PULVERISETTE 13 classic line can be combined with the FRITSCH Jaw Crushers PULVERISETTE 1 classic line – the ideal solution for fast, continuous pre- and fine-grinding particularly of large quantities of coarse material. Mounted together onto a rack and connected to each other by a chute, they automatically grind the material from a particle size of up to 95 mm to a final fineness of down to 100 μm – fast, easy and effective in a single step.
