Van Gink Trading BV is specialised in Flip-Flow screens for all types and brands of flip-flow screening machines. Made of wear resistant Githan polyurethane and well priced. Also interesting: short terms of delivery. A variety of holes is possible (square, round etc.). Also lining tiles for silo’s and bunkers. Mat lengths up to 3000 mm. Visit our website for our other wear resistant products.

Guide rollers with polyurethane diabolic coating Guide rollers with polyurethane diabolic coating Improving belt and frame life. The new guide rollers by Van Gink Trading BV are a solution for guiding and centering conveyor belts. The rollers are placed on the upper or lower (transport or return) part of the conveyor belt. The roller is made of t of a steel roller with a polyurethane diabolic formed outer layer. The guide rollers are suitable for guiding and correcting magnetic overbelts or other rubber belts so that they are not able to damage the conveyor frame or itself. Technical data: Material: Githan polyurethane 95 Shore A PU outer diameter: 120 mm PU inner diameter: 80 mm Roll length: 90 mm Mounting: 1 side 20mm x 50 mm wire , incl. 2 half M20 nuts For more information or an offer please contact us.

Chevron belt scraper Van Gink Trading BV launches its new profiled belt scraper. The tricky thing about chevron conveyor belts is that they are very difficult to clean. Especially with sticky material scraping is necessary. Where rotating brushes quickly fill up And this newly developed scraper is a good solution for rapid wear. The robust profile belt scraper has a frame made of electrolytically galvanized steel. It is mounted perpendicular to the conveyor belt, preferably just behind the drive drum. The scraper units of 150 mm wide are provided with 10 mm thick, wear-resistant finger blades made of Githan polyurethane. Easy to assemble and quickly exchangeable. Available in bandwidth 500 mm up to and including 1,600 mm. You can always contact us for a free quote.

Primary scrapers (head scrapers) are the first requirement for belt cleaning and to prevent spilled product under your conveyor belts. The head scraper consists of 2 electrolytically galvanized spring tensioners, a heavy main shaft and a polyurethane scraper blade. Recently also available with stainless steel spring clamping units for aggressive / corrosive conditions and for outdoor installation. The 150 mm high scraper blade is made from the extremely durable Githan G98 polyurethane (also oil and microbe resistant). Can be used in many industries, among others. concrete, asphalt, minerals, coal, compost, waste, incineration slag. Benefits: - very compact dimensions, making it suitable for use in many places; - place spring tensioners in various ways; - quickly exchangeable scraper blade; - due to the constant spring pressure, little tension and even wear of the blade. - Prices and delivery times on request.

Belt saver! The new conductor rollers from Van Gink Trading BV can be a result of centering and steering the conveyor belt. The guide roller is placed on the conveyor top or return path, the roller consists of a thick-walled heavy-duty roller with a diabolic polyurethane sheath around it. The roller is suitable for correcting, for example, an oblique conveyor belt or overbelt magnetic separator. Technical data: Material: Githan Polyurethane 95 Shore A PU outer diameter: 120 mm PU inner diameter: 80 mm Rolling Length: 90 mm Confirmation: one side thread end 20 x 50 mm plus two half nuts For more information or an offer please contact us.

Improving belt and frame life! The new guide rollers by Van Gink Trading BV are a solution for guiding and centering conveyor belts. The rollers are placed on the upper or lower (transport or return) part of the conveyor belt. The roller is made of t of a steel roller with a polyurethane diabolic formed outer layer. The guide rollers are suitable for guiding and correcting magnetic overbelts or other rubber belts so that they are not able to damage the conveyor frame or itself. Technical data: Material: Githan polyurethane 95 Shore A PU outer diameter: 120 mm PU inner diameter: 80 mm Roll length: 90 mm Mounting: 1 side 20mm x 50 mm wire , incl. 2 half M20 nuts For more information or an offer please contact us!