Function The solids sampler is manually operated by means of a crank. Turning the crank makes that the product is conveyed out of the process via a screw conveyor. When turning in clockwise rotation the sample is taken. Upon turning counter-clockwise again, the residual product is conveyed from the screw conveyor into the process. Characteristics * Process connection: DN25 flange according to EN1092-1 * Ball valve in the discharge path * Bottle holder: GL45 screw thread according to DIN 168-1 * GL45 screw cap * Stainless steel construction

Cross-Cut Sampler If samples for the analysis of cornsizedistribution are required, it is not enough to take a controlled section from the solid stream. In order to get a convincing evaluation of the overall product, we recommend to capture the complete product stream and to take a representative cross cut. Our cross cut sampler for verticle gravity chutes is well suited for this type of sample taking. Increments of powder or lumps of solids are taken out and delivered by gravity to a sample bottle or fall into a chute. When activated a cutter pivots through the full product stream, sweeping 90° arc, collecting a true cross-section sample. The cutter inlet is shaped so that all particles from any part of the cross-section have the same probability of being sampled independent of speed of movement. The collected sample quantity can be varied in proportion to the speed of the movement. In order to take samples proportionally over a longer period of time the cross-cut sampler can also be fully automated.

powder sampler If samples for the analysis of cornsizedistribution are required, it is not enough to take a controlled section from the solid stream. In order to get a convincing evaluation of the overall product, we recommend to capture the complete product stream and to take a representative cross cut. Our cross cut sampler for verticle gravity chutes is well suited for this type of sample taking. Increments of powder or lumps of solids are taken out and delivered by gravity to a sample bottle or fall into a chute. When activated a cutter pivots through the full product stream, sweeping 90° arc, collecting a true cross-section sample. The cutter inlet is shaped so that all particles from any part of the cross-section have the same probability of being sampled independent of speed of movement. The collected sample quantity can be varied in proportion to the speed of the movement. In order to take samples proportionally over a longer period of time the cross-cut sampler can also be fully automated.

Rotating Pipe Powder Sampler Sampling is done with a single rotating movement of max. 120°. In a fixed guide tube rotates a high polished internal tube. During sampling the inlets of the two pipes lay on top of each other. The sample freely drops out by gravity. The whole way of discharge the powder keeps moving on nad the product will protected from mechanical stress and grounding. An additional advantage is that the sampler has large free cross-sections for discharge. The quantity of sample collected can be varied as a function of the speed of the rotating movement. The system can automated for representative proportional sampling for a long period of time. The process connections and the construction materials will designed according to customer wishes.