Compliant with even the highest requirements When suction or transport hoses are used in the chemical, food and pharmaceutical industries, they must comply with extremely strict requirements and regulations. The potential applications for these hoses are many and varied – as are the needs of these sensitive industries. As a manufacturer of industrial hoses, NORRES therefore combines industry-specific consulting with quality products – and with its innovative portfolio is always at the cutting edge. New on the market – Norplast® PUR-C 386 FOOD-AS FDA NORPLAST® PUR-C 386 FOOD-AS FDA is a new hose which has just expanded the food and pharmaceutical range. It is perfect for use in the food and pharmaceutical industries thanks to the food grade wall and antistatic properties. This is also confirmed by various certifications: the wall is food grade according to EU Regulation 10/2011, EC 1935/2004, EU Regulation 2015/174 and FDA 21 CFR, 177.1210. The antistatic properties meet the requirements for certification…

Range of applications in the food industry is further expanded Industrial hose systems used in the food industry are subject to strict hygiene requirements, and their use is also subject to considerable restrictions. Almost all food grade hoses from NORRES were tested by an independent test institute according to the most recent Directive 10/2011. This means the range of possible applications has been expanded even further. Industrial hoses tested according to the most recent directive 10/2011/EC In addition to the AIRDUC® PUR 351 MHF or the AIRDUC® PUR 355 MHF, further food grade hoses from the hose manufacturer NORRES were tested for use in the food industry by an independent test institute according to the current Directive 10/2011 and therefore can now be used in significantly more areas of application in the food industry. In addition to the NORFLEX® PUR 401 MHF, the PROTAPE® PUR 330 MHF and PROTAPE® PUR-INOX 330 MHF as well as the BARDUC® PUR-INOX 382 MHF were tested according to the currently valid directive 10/2011/EC.…

CP PTFE-INOX 475 EC excels with a combination of flexibility and heat resistance The electrically conductive CP PTFE-INOX 475 EC suction and blast hose is the newest addition to the NORRES product range. This hose is particularly suitable for transporting combustible bulk materials and for use in hazardous areas. With its robust construction and excellent heat resistance, it is ideal for exhausting aggressive gaseous media like vapours and smoke. The CP PTFE-INOX 475 EC was designed for all temperatures from approximately -150¡ÆC to +250¡ÆC. It even withstands heat up to around +270¡ÆC for short periods. The hose offers good chemical resistance, especially to acids and bases as well as UV and ozone; it is flexible and kink-proof, and has minimal counterforce and restoring force when bent. The CP PTFE-INOX 475 EC achieves an optimal throughput of aggressive solids such as dust, powder and fibres and is thus predestined for dust removal and suction plants. A highly flexible hose that is compressible 4:1, it can additionally be used for bellows…

Robust, insulating and patented for high temperatures NORRES, the Gelsenkirchen based hose manufacturer, has just extended its range of clamp profile hoses with two new, highly flexible high-temperature products. The CP HiTex 485 and CP HiTex 486 are not only extremely flexible, they are also compressible, multi-layered, robust and suitable for slight overpressure. The CP HiTex 485 can be used at up to +500°C while the CP HiTex 486 withstands up to +650°C. The multi-layer wall of both hoses has an interior and exterior lining made of special coated glass fabric in a patented CP design for unrivalled security and durability. There are times when even a suction and blast hose starts to feel the heat. This is where the two new high-temperature hoses from NORRES come into play – thanks to its multi-layer hose wall, the CP HiTex 485 withstands temperatures up to +500°C as well as peaks up to +550°C. The CP HiTex 486 additionally has a thermal insulation layer. Temperatures up to +650°C and peaks as high as +700°C simply…

New Plant II offers significantly expanded manufacturing and warehouse capacities as well as more ef NORRES, the Gelsenkirchen based hose manufacturer, has taken up residence in its new home: the refurbished Plant II on the "Am Stadthafen 12-18 site" in Gelsenkirchen was finally ready for occupancy on July 20. The full benefit of the significantly expanded manufacturing capacities can now be leveraged as a result of the move to the new facility. The investment in new plant during the last few months and years will make our production processes both faster and more efficient. NORRES" new headquarters boasts a series of modern energy saving technologies that help protect the environment, such as centrally controlled air conditioning and production utilising heat recovery. The new Plant II will also benefit for NORRES customers all over the world in a number of ways: The new, central warehouse covering approximately 25,000 m² of floor space with state-of-the-art logistics technology and nearly one million metres of hose and one million component parts…