IP69k + IP68 rated The XD30 remote builds on Rinstrum’s already successful X320 indicator to create a remote display that is ideal for use in food processing, automotive, chemical or pharmaceutical applications or applications that require reliable operation in harsh environmental conditions. • Bright LED Backlighting • 20mm (0.8in) LCD display • Tough enclosure - impact resistant composite alloy housing • Cross manufacturer compatibility • Auto-detecting setup Versatile build options: AC and DC (wide voltage range of 4.8 to 24V) IP69K rating: the industry’s highest environmental protection rating - designed to withstand cleaning with high pressure water jets (1400psi) at high temperatures (up to 80°C) from multiple angles. Auto-detecting setup: Using the auto/continuous/streaming serial output communications on an indicator/PC/PLC the XD30 remote will auto detect the stream, establish communications and display the reading automatically. See…

The Rinstrum Bluetooth accessories use the serial port profile (SPP) to provide a short range RS232 to Bluetooth wireless connection. The devices are self discovering and no setup is required at the host device. They are compatible with all Rinstrum indicators and remote displays that support serial communications (RS232). Bluetooth Accessory Options: • M0200 cable replacement master end - used with M0201 cable replacement slave device. • M0202 Multi-roaming master device (used with M0203) • M0203 Multi-roaming slave device - can be used with M0202 or any other BT SPP master such as a PC, smart phone or PDA Application Scenarios: Cable replacement – in this case the indicator (master) is equipped with a M0200 and the remote display or console (slave) equipped with a M0201. Multi-roaming - where one master device may connect to different slave devices depending on which is in range. In this case the M0202 is used at the master and the M0203 in the…

R400 Series - R423 Standalone Stainless Steel The R423 previously available in a panel mount version is now available in a standalone stainless enclosure. • Rated to IP66 it is dust and water resistant • All Stainless Steel (304/1.4301) • Easy access to rear of indicator and cabling when back cover removed • Compatible with all R400 series modules • High impact polycarbonate lens to protect the LCD from knock • Easily accessed tilt adjustment with positive locking Multiple mounting options using a single stand: • Desk/Wall/Post • Cut outs - key hole, Rinstrum standard post mounting and cable routing hole Available for all R400 application software: • K401 General Weighing • K402 Multi-product • K404 Truck Weighing • K410 Filling • K411 Batching • K481 Summing

...for complete integration of Rinstrum devices* onto a Profibus network The Rinstrum 1400 is a Profibus-DP module that allows for a selection of Rinstrum indicators and displays to be connected onto a Profibus-DP network. The 1400 translates the data from the indicators intio the Profibus format. This allows the Profibus master to effectively extract status and weight data e.g. from the indicators and send commands to the indicator. The data slots are fully configurable. 1400 Features - Comprehensive diagnostics of the connected devices - Connects up to two devices (may be different types) to the Profibus, one per serial port - *Supported devices 5000, 5100, WE2110, R420/R423 and the 6500 display - Status LEDs on each port for diagnostics Data Features - Input Data – Indicator status, current weight, I/O status etc. Any of the R400 numeric registers are available as these data slots are configurable. - Output Command Data – remote key functions, targets, flight etc. The R420 Advanced supports write and execute registers…

Simple Setup * Filling * Negativ Batching The R400 series has been expanded to include the K410 software for single material filling applications. Batching specifications: * 100 Recipes (Products) * 3 set batching stages - Fill, Dump and Pulse * 1 Material * 3 Speed Fill * Fill correction using jogging or in-flight * Dump to time or weight * Negativ batching - Supported by setting the fill direction which defines if the weight is increasing or decreasing while batching * Batch suspend - A suspend function key can be set that will pause the batch and adjust the tare weight when resuming the batch * Timer based multiple batching Ideal for dosing and bag or silo filling as well as filling applications using negativ batching, e.g. dischcarge from a silo into a truck. With its large two line display using logical prompts, its dedicated and programmable function keys and the tailored printing of custom record, docket and reports printout the R400 indicators are highly operator friendly.

Batching indicator Software: R400-K411 2.20 and higher (applies to V2 Hardware) The R423 hardware and software has been upgraded to support multiple recipes and a variety of other features. * 100 Recipes Automatic proportion on first fill * Automatic proportion calculation after first fill stage * Proportions of remaining batch are adjusted automatically according to first material fill quantity * Ideal for applications with a manually loaded first fill stage Two printer support * Support for up to two (2) printers * Selectable port per printout type * Ideal for applications that require a customer docket and a company print record or alibi Time of day batching * Timer based multiple batching * The Real Time Clock is used to control the batch timing for time based batching * Ideal for bio-fuel applications, delayed batch start or night shift operations