Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

       

COMPANY PAGE

Login
Latest update: 10.08.2022
ENVEA Process GmbH
TEL: +49 7635 827248 0
FAX: +49 7635 827248 48
Gutedelstrasse 31
D-79418   Schliengen
Germany
Contact
Company video
YouTube Channel
YouTube Channel
Company brochure
Company brochure
Your specialist for the measurement of mass flow of dry bulk solids with solutions to the marketplaces for:

material mass flow measurement, lean & dense phase
level control
continuous moisture measurement
dust filter damage monitoring
dust emission measurement
dust velocity measurement

Our systems can be used for most types of solids in many industries.
Meet us at

Posts

Optimising the corn washing process Saving energy and resources through precise mass flow measurement in the processing of the agricultural product corn.
Optimising the corn washing process
Saving energy and resources through precise mass flow measurement in the processing of the agricultural product corn. Our customer from the food industry prepares corn for resale after harvesting. For this purpose, the corn is first washed and dried, then stored. The agricultural product is delivered by trucks and unloaded into a drum conveyor. From there, the corn is transported via a bucket elevator into an inclined DN150 pipe, which leads the product via a conveyor belt into the washing process. The customer‘s goal is to be able to better control the washing process and automatically adapt it to the quantity conveyed in order to optimise the addition of water and detergent and save energy. For this purpose, the quantity of corn conveyed must be measured. PROCESS DATA * Customer: Food producer * Material: Corn * Throughput: 7-40 t/h * Conveying device: Drum feeder and bucket elevator * Installation: In a slide * Function: Measurement of the quantity of corn conveyed to optimise the washing process SOLUTION Previously, corn was measured with an impact weighing system,
01.12.2022  |  266x  |  Product news  | 
ENVEA presents the new LAS 5000XD in-situ laser (TDLS) gas analyzer The LAS  5000XD cross-duct laser gas analyzer offers fast response time, robustness and is calibration free.  for measuring an extensive range of parameters such as NH3 + H2O, HF, CO + CO2, O2,  HCl + H2O, CO2 + H2O, etc.
ENVEA presents the new LAS 5000XD in-situ laser (TDLS) gas analyzer
The LAS 5000XD cross-duct laser gas analyzer offers fast response time, robustness and is calibration free. for measuring an extensive range of parameters such as NH3 + H2O, HF, CO + CO2, O2, HCl + H2O, CO2 + H2O, etc. The new TDLS (Tunable Diode Laser Spectroscopy) LAS 5000XD gas analyzer comes in various models for measuring an extensive range of parameters such as NH3 + H2O, HF, CO + CO2, O2, HCl + H2O, CO2 + H2O, etc. It has been designed to offer robustness, fast response time (1 s) and high accuracy measurement in harsh environments. The analyzer is calibration free, doesn’t require a sampling system and provides a large and dynamic measurement range from ppm to %. It offers real-time communication between receiver and transmitter units and an embedded web server. In addition, the LAS 5000 XD includes a specific feature for managing outside path interference. Indeed, thanks to ClearPath, interference of relative humidity, O2 or CO2 is removed from the purging areas. This guarantees high accuracy measurement of H2O, O2 and CO2. As a consequence, N2 and dry air purge are not needed. Operator’s benefits include low maintenance, process optimization and reduced total
24.11.2022  |  302x  |  Product news  |   | 
Automated moisture measurement of anthracite coal When processing anthracite coal into briquettes the moisture range is crucial for the product quality. To save time and costs, the moisture measurement process needed to be automized.
Automated moisture measurement of anthracite coal
When processing anthracite coal into briquettes the moisture range is crucial for the product quality. To save time and costs, the moisture measurement process needed to be automized. Our customer is a leading manufacturer of process carbons. More than 70,000 tonnes of dry coke, anthracite, blown coal and alloying coal are produced each year for the iron, steel and electrode industries throughout Europe, as well as for other areas of application. Anthracite coal is of particularly high quality. At the beginning of the processing process, the material is in powder form, which is then processed into briquettes. In order for it to be formed into a briquette, it needs a special moisture range. If the powder is too wet, it sticks to the mould. If it is too dry, on the other hand, a briquette cannot be formed at all. To obtain the right moisture range, the moist anthracite is mixed with dry starch. The plant operator takes a sample of the material every 15 minutes to check. In order to automate and optimise this manual sampling, the customer was now looking for a measuring solution. Process data * Customer: Process carbon manufacturer * Material:
03.11.2022  |  362x  |  Product news  | 
Trevor Sands was appointed new CEO of ENVEA ENVEA Global, a worldwide manufacturer of ambient, emission and process monitoring systems, announces the appointment of Trevor Sands to the position of CEO.
Trevor Sands was appointed new CEO of ENVEA
ENVEA Global, a worldwide manufacturer of ambient, emission and process monitoring systems, announces the appointment of Trevor Sands to the position of CEO. ENVEA Global is a French company in which the investment fund The Carlyle Group (NASDAQ: CG) has a majority stake, continues its growth story and announces the appointment of Trevor Sands to the position of CEO. Trevor has extensive senior leadership experience in global industrial businesses. He was most recently Global President of Servomex Group, the global expert in gas analysis. Prior to this he ran the Control Valves business for IMI plc, he was Chief Executive of Cosalt plc and also spent thirteen years with Emerson, including leading the Fisher Valves European business and later running the Daniel Measurement and Controls Division. His early career was spent with Invensys, Unitech and Arthur Anderson in various finance roles. Trevor has also enjoyed ten years of international experience through his career, in Switzerland, the US and Russia. Trevor graduated from the University of Bristol with a Bachelor of Science (B. Sc.). Trevor Sands’ main mission
11.10.2022  |  517x  |  Press release  | 
Improving spray painting stations with powder flow monitoring  One of our customers identified a non-conformity in their painting process. With powder flow monitoring this problem was solved.
Improving spray painting stations with powder flow monitoring
One of our customers identified a non-conformity in their painting process. With powder flow monitoring this problem was solved. APPLICATION Powder spray lines are an essential component in the automotive painting process. Spray lines are automatically activated in certain time sequences. One of our customers identified a non-conformity in their painting process. During each run, they found that some car parts were not evenly covered after painting. To combat this problem and to ensure sufficient material was applied, they had to increase spraying time. After multiple runs, unnecessary material was often applied, leading to higher production cost. In addition, there was no online process information, the only measuring data was the weight difference after each paint run. PROCESS DATA * Customer: Car parts manufacturer * Material: Pulverised pigments * Installation: Non-metallic hose * Function: Monitor powder flow SOLUTION The FlowJam T was acquired to monitor nine spray painting stations. With its compact design, and simple adjustment method, it’s been specially developed
01.09.2022  |  510x  |  Product news  |   | 
Avoid blockages and downtime with continuous moisture measurement A company from the plastics processing industry was looking for a way to detect moisture in the material delivery of its bagging plant to avoid enormous difficulties when discharging material.
Avoid blockages and downtime with continuous moisture measurement
A company from the plastics processing industry was looking for a way to detect moisture in the material delivery of its bagging plant to avoid enormous difficulties when discharging material. APPLICATION A company from the plastics processing industry was looking for a way to detect moisture in the material delivery of its bagging plant in order to be able to recognize at an early stage whether material that is too moist is being blown into the following silo. In the past, this led to enormous difficulties when discharging material from the silo. In addition, a solution was sought to be able to monitor the suppliers of the raw material (PE granules) with regard to the permissible moisture limits. PROCESS DATA * Customer: Plastics industry * Material: PE granules * Humidity range: Differentiation dry – humid * Installation: Hopper outlet after bagging plant * Function: Control of the moisture content in the delivered raw material (PE granulate) SOLUTION The robust, easy-to-use M-Sens 2 has been specially developed for online moisture measurement of bulk solids and delivers reliable results. The installation was carried out here in the material
22.07.2022  |  615x  |  Product news  | 
Show more (46)
PORTALS
BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising
FOLLOW US
Linked