Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

       

News items December 2020

Post your news
Moisture Measurement in Aggregates and Sand Hydronix microwave moisture measurement has proved to be invaluable  industries that use sand or aggregates to increase the accuracy of batching and slump control.
Moisture Measurement in Aggregates and Sand
Hydronix microwave moisture measurement has proved to be invaluable industries that use sand or aggregates to increase the accuracy of batching and slump control. Modern plants can weigh aggregates with an accuracy of up to ± 0.5%. If the amount of moisture in a batch of sand or aggregates varies from between 2% to 10% then this will affect the accuracy and proportions of the weighed materials since water is effectively being weighed and not dry materials. Benefits * Reduction in number of spoilt batches * Ability to batch the correct weight of sand regardless of water content * Ability to set high or low moisture levels alarms Moisture sensors can measure moisture levels in materials being discharged from bins, on conveyor belts or within vibratory feeders. The sensors are placed directly in the flow of the material, and take 25 measurements per second as the sand or aggregate flows over the ceramic measurement surface. These measurements are then transmitted to the plant control system in real time. This allows the manufacturer to accurately control water addition during processing and ensures that batches are of a
28.12.2020  |  3986x  |  Product description  |   | 
AirScrape conveyor belt skirting, the first installation Case-Study. Worldwide practical application experience and here the first installation of the first contact free conveyor belt skirting. Since installation nor friction, no wear, no maintenance, no dust, no spillage.
AirScrape conveyor belt skirting, the first installation Case-Study.
Worldwide practical application experience and here the first installation of the first contact free conveyor belt skirting. Since installation nor friction, no wear, no maintenance, no dust, no spillage. Already in 2012, in response to a specific operator requirement, Wilfried Dünnwald, inventor of this technology, developed the prototype of the AirScrape. The conveyor belt skirting system worked perfectly from the first minute, is still reliably in use today and was ultimately a major factor in the founding of ScrapeTec Trading GmbH. The AirScrape systems installed on plants in various industries now protect about 1,000 belt transfers worldwide. Parallel to the interest in these units, the number of contractual partnerships is also growing. Trained specialists are on the road everywhere to ensure installation and service. Here is one selected example: Germany: The solution was perfectly convincing for the operators of a dolomite processing plant, who regularly had to deal with dust and material losses at the transfer from the rotor crusher to the belt. Material spills in the ton range and enormous dust generation were an annoying standard. In addition, there were
27.12.2020  |  4879x  |  Product news  |   | 
Safe silo weighing for reliable level detection Silos store large quantities of valuable material, often in the form of bulk goods or other heavy-flowing raw materials. In order to ensure a continuous production process without interruptions, it is necessary to have an exact view of material quantity.
Safe silo weighing for reliable level detection
Silos store large quantities of valuable material, often in the form of bulk goods or other heavy-flowing raw materials. In order to ensure a continuous production process without interruptions, it is necessary to have an exact view of material quantity. Unlike low-viscosity liquids and gases, bulk solids are heavy-flowing materials that make level monitoring difficult, e.g. when bridges form in the material or the material is unevenly distributed in the silo. Some materials also have a fluctuating density, which makes it even more difficult to determine the mass of raw material via fill level. In such cases, weighing the silo is a particularly good way of ensuring accurate fill level control. Here, the silo stands on load cells and thus records the mass of the material regardless of its position and distribution in the silo. Since the weighing is integrated into the structure of the silo, the question is how this can be done safely. The scale becomes part of the structure and therefore also consideration of its static integrity needs to be taken into account. In order to simplify this process, Scaime has developed solutions that make it easier construct and operate silo weighing in all steps of the project.
22.12.2020  |  3116x  |  Product description  | 
New RHEWUM Remote Service for best customer support, any place and time
 Not identifying and correcting malfunctions on screening machines can become very expensive for you as a producer. But what to do if the service technician cannot be on site? The new RHEWUM Remote Service provides a solution.
New RHEWUM Remote Service for best customer support, any place and time
Not identifying and correcting malfunctions on screening machines can become very expensive for you as a producer. But what to do if the service technician cannot be on site? The new RHEWUM Remote Service provides a solution. For us, SERVICE means supporting you at any time with our know-how, developing solutions quickly and implementing them effectively. That’s why we are now offering an exclusive RHEWUM Remote Service, which allows our service technicians to visit you virtually at your production site. What services are available for booking? In the "Service" menu select "Remote Service" to choose between a "Free Machine Inspection" or the "Remote Service Support". In the case of the "Free Machine Inspection", our service technician will spend one hour with you to inspect your machine and examine the function of your screening machine. Additionally, a written report with our recommendations for service and spare parts can be booked as an option. The "Remote Service Support ", on the other hand, is a chargeable offer that can be booked for four hours or more. This option is particularly suitable for maintenance work, emergencies or commissioning. How to make an appointment? Once
22.12.2020  |  4143x  |  Product news  | 
Expanded flow, the neglected solution Mass flow, with well known flow and operational benefits, is not always feasible. In these cases expanded flow may be a viable option.
Expanded flow, the neglected solution
Mass flow, with well known flow and operational benefits, is not always feasible. In these cases expanded flow may be a viable option. The flow and operational benefits of mass flow are now well known, but the size of headroom required for the adoption of this flow regime is often a strong disincentive to its wider adoption. However, it is important to appreciate that there are three separate reasons to adopt a mass flow design and that one of these can be more economically secured by an expanded flow type of construction. Reasons for mass flow design * To avoid dead reasons of storage for materials that may deteriorate in either flow condition or value over time in storage zones that have indefinite holding periods. It should be noted that this reasons only applies if the hopper is to be refilled before it completely empties. * To minimise segregation by virtue of a mainly ‘First-in, first-out’ flow pattern. Velocity gradients across a converging flow channel upset a true reversal of the loading sequence. * To secure reliable flow though smaller outlets and avoid the danger of ‘ratholes’,
21.12.2020  |  1069x  |  Product news  | 
COMSOL Releases Version 5.6 and Introduces Four New Products The capabilities of modeling polymer flow and high-accuracy fluid models have been expanded, among others.
COMSOL Releases Version 5.6 and Introduces Four New Products
The capabilities of modeling polymer flow and high-accuracy fluid models have been expanded, among others. COMSOL, provider of software solutions for multiphysics modeling, simulation, and application design and deployment, has released version 5.6 of the Comsol multiphysics® software. The new version features faster and more memory-lean solvers for multicore and cluster computations, more efficient CAD assembly handling, and application layout templates. A range of new graphics features — including clip planes, realistic material rendering, and partial transparency — offer enhanced visualization for simulation results. Four new products expand the capabilities of Comsol multiphysics for modeling fuel cells and electrolyzers, polymer flow, control systems, and high-accuracy fluid models. Faster and More Memory-Efficient Solvers Solver performance has greatly improved in version 5.6, to the benefit of COMSOL® users working with large models that have millions of degrees of freedom. "In version 5.6, we have made general improvements to both the algebraic multigrid
21.12.2020  |  616x  |  Product news  | 
Conveyor belt ArcelorMittal on the right track with Centrax Trouble-free belt conveying is crucial for ArcelorMittal in Belgian Gent. CenTrax ensures that the conveyor belt remains aligned along its entire length.
Conveyor belt ArcelorMittal on the right track with Centrax
Trouble-free belt conveying is crucial for ArcelorMittal in Belgian Gent. CenTrax ensures that the conveyor belt remains aligned along its entire length. At its location in Ghent, ArcelorMittal Belgium was experiencing severe misalignment problems with their 225 conveyor belts, which have a total length of 58 kilometres. The damage caused to the conveyor, its structure and unplanned downtime resulted in high costs, loss of production and consequential losses. Tim Vertriest, reliability engineer at ArcelorMittal Ghent, decided to find a solution: “The CenTrax tracking system came out best in our comparison search, and has proved to be a lasting solution.“ 10 million tonnes of raw materials A trouble-free conveyor belt is crucial for a company such as ArcelorMittal. The Raw Materials, Port, Transport and Recycling divisions of the world’s largest steel producer processes almost 10 million tonnes of raw materials annually. This particular logistics branch deals with unloading seagoing vessels and the careful separation and storage of delivered raw materials to so-called raw material storage areas. Harbour cranes
18.12.2020  |  1452x  |  Product news  | 
CenTrax for RWE Eemshaven power plant Downtime of the conveyor belts caused delays in supply and additional costs. Within a month CenTrax tracker rollers proved to be the solution.
CenTrax for RWE Eemshaven power plant
Downtime of the conveyor belts caused delays in supply and additional costs. Within a month CenTrax tracker rollers proved to be the solution. The constant downtime of the conveyor belts caused delays in supply and additional costs. RWE consulted TBK Group, after which it was decided to install our CenTrax tracker rollers for a trial period. Within a month, it was already clear that CenTrax was the solution to their misalignment problem. Large coal and biomass power plant RWE Generation’s Eemshaven power plant is the largest coal and biomass power plant in the Netherlands. Covered conveyor belts ensure dust-free transport of the coal from ships to the power plant or the storage yard. This process was always accompanied by jerks and jolts due to frequent belt misalignment. The constant downtime of the conveyor belts caused delays in supply and additional costs. RWE consulted TBK Group, after which it was decided to install our CenTrax tracker rollers for a trial period. Within a month, it was already clear that CenTrax was the solution to their misalignment problem. [IMG03**R45**] Misalignment due to
18.12.2020  |  1098x  |  Product news  |   | 
PHD Studentship Sponsored by Schenck Process UK Ltd Join a study into Improving the efficiencies of manufacturing through the implementation of digital systems in pneumatic conveying pipelines
PHD Studentship Sponsored by Schenck Process UK Ltd
Join a study into Improving the efficiencies of manufacturing through the implementation of digital systems in pneumatic conveying pipelines Experts at the Wolfson Centre for Bulk Solids Handling Technology, University of Greenwich, UK have joined forces with Industry giants Schenck Process UK Ltd to offer a fully paid 3 year studentship to look at how the digitalisation of pneumatic conveying systems can help improve the manufacturing process. Constantly pro-active or re-active “Industry 4.0” is a defined term indicating the ability of a process to be constantly pro-active or re-active in response to the process conditions or material characteristics, as opposed to the traditional approach of commissioning at a set point and left to operate with the same settings or occasionally reset by the process supervisor. Pneumatic conveying The key application here is pneumatic conveying, the transport of particles through a pipeline by a gas flow. This is universally applied to in-plant transport of particles between process steps in the power, cement, minerals, food, pharmaceuticals, petro-chem, fines
18.12.2020  |  4085x  |  Press release  | 
On line learning; Pneumatic Conveying of Powders and Bulk Materials Short Course; 6 - 12 January
On line learning; Pneumatic Conveying of Powders and Bulk Materials
Short Course; 6 - 12 January An intensive course looking at the components of pneumatic conveying systems, system selection and design techniques. Day 1: Introduction to pneumatic conveying / Components Day 2: System design / Economic design Day 3: Interfacing / Explosion hazards / ATEX-DSEAR Day 4: Operation and control of blow tanks / Blow tanks and transport Day 5: Uprating systems / Case studies Each session will include time to discuss operational issues with the presenter and other delegates. A previous delegate said of the course: This course demonstrated to me that an appropriate scientific approach can help to understand this art of pneumatic transport. I recommend this training to engineers who want to tackle powder conveying problems (design and operation) in their factory. Should I attend? If you are a plant designer, plant manager or work in maintenance, this course will improve your ability to deal with the design and troubleshooting of plants. You’ll also benefit
16.12.2020  |  3618x  |  Product news  | 
In-depth cooperation agreement between the EZD and LUM Joint press release from SKZ - KFE gGmbH & LUM GmbH
In-depth cooperation agreement between the EZD and LUM
Joint press release from SKZ - KFE gGmbH & LUM GmbH Berlin & Selb, 15.12.2020: The head of the European Center for Dispersion Technologies (EZD), Selb, Dr.-Ing. Felipe Wolff-Fabris, and the managing director of LUM GmbH, Berlin, Prof. Dr. Dr. Dietmar Lerche, signed an in-depth cooperation agreement to significantly intensify the cooperation that has existed since 2013. The EZD in Selb, a facility of the Kunststoff-Zentrum SKZ, is an interdisciplinary research and innovation center focusing on production and characterization of dispersions (such as adhesives, resins, inks, coatings, elastomers). In addition, training courses and courses on various topics relating to dispersing are offered at the EZD. LUM GmbH is a leading international provider of innovative measurement technology for particle characterization in the nano and micro range, for dispersion analysis and for materials testing. The agreement between both parties aims to: 1. bundle know-how of both companies in the field of characterization of particles,
15.12.2020  |  3679x  |  Press release  | 
Distance-knocker QJ from singold: Engineering at its very best Distance-Knocker QJ - installed at a distance from the object to be knocked off
Distance-knocker QJ from singold: Engineering at its very best
Distance-Knocker QJ - installed at a distance from the object to be knocked off Distance-knocker QJ from singold: Engineering at its very best The pneumatic distance knocker from singold gerätetechnik gmbh is a unique product and the result of the highest level of engineering - well thought out down to the smallest detail. It was developed by the company’s founder Erwin Lüer, whose pneumatic knockers remain the most powerful on the market today. Mode of action The distance-knocker QJ is based on the simple, yet ingenious idea of the pneumatic knocker. Spontaneously released energy stored in the form of compressed air, accelerates the percussion piston, which is designed as a permanent magnet. The piston hits a mobile impulse part, which is strongly accelerated after the impulse set and transfers the energy to the element to be knocked off. This process occurs at such a high speed that it is barely visible to the human eye. Due to its additional impulse part, the distance-knocker QJ broadens the application possibilities when compared
15.12.2020  |  3609x  |  Product news  | 
NetterVibration wishes a relaxing Christmas season Thanks for your loyalty and solidarity in 2020
NetterVibration wishes a relaxing Christmas season
Thanks for your loyalty and solidarity in 2020 This year was marked by unusual circumstances. The shown cohesion and mutual support make us stronger to meet such unprecedented challenges together. We have grown together as a society and our values have taken on greater significance again. Both in private and business relationships. We would like to thank our customers and business partners for their loyalty and solidarity and we look forward to continuing our good and faithful cooperation. We wish you all a relaxing Christmas season and a happy and above all healthy New Year. Your NetterVibration team
15.12.2020  |  3348x  |  Press release  | 
Glossary of Terms in Powder and Bulk Technology  An explanation of terms relating to particle technology as an introductory tool for non-specialists, newcomers and students in the field.
Glossary of Terms in Powder and Bulk Technology
An explanation of terms relating to particle technology as an introductory tool for non-specialists, newcomers and students in the field. Bulk solids play a vital role in human society, permeating almost all industrial activities and dominating many. Bulk technology embraces many disciplines, yet does not fall within the domain of a specific professional activity such as mechanical or chemical engineering. The British Materials Handling Board perceived the need for a Glossary of Terms in Particle Technology as an introductory tool for non-specialists, newcomers and students in this subject. The glossary was prepared by Lyn Bates for The British Materials Handling Board (BMHB). It contains an Introduction, with 3 paragraphs: Bulk solids in industry; Rand Reports on the performance of plants that handle bulk solids; and General terms. Sections of terms Then term in the glossary are grouped in the following sections: Types of Powder, Powder Properties, Powder Processing, Particle Properties, Particle Size, Particle Shape, Pore Size and Shape, Particle Surface Area, Particle Test Methods (of Image
14.12.2020  |  1242x  |  White paper  | 
Contactless material flow detection on conveyor belts Detect material movement
Contactless material flow detection on conveyor belts
Detect material movement Industrial efficiency is achieved after a chain of small improvements across the plant. Our customer in agriculture industry transports corn cobs via a conveyor belt. He was looking for an easy to install and maintain solution to monitor whether material flows on top of their conveyor belt. With this information more control and automation as well as an exchange of information with the upstream and downstream process is possible. Process data Customer: Agriculture industry Material: Corn cobs Installation: Over the conveyor belt Function: Detect material movement Solution FlowJam is developed to be simple to install, adjust and maintain. It’s the right choice for material flow and material jam monitoring. Any pipe section can be monitored. Contactless material flow detection can be achieved thanks to the Microwave technology. Such installation allows durability and no damages in the sensor. Installed over the conveyor belt, the sensor has no material contact
14.12.2020  |  3414x  |  Product description  | 
Automatic reproducible sieve stack tensioning system For exact results and can be attached and used with any sieve shaker
Automatic reproducible sieve stack tensioning system
For exact results and can be attached and used with any sieve shaker The universal sieve clamping system TorqueMaster enables automatic and reproducible tensioning of the sieve stack on the sieve shaker during dry sieving with test sieves 200 mm/8’’ diameter. Although the tensioning has a great influence on the sieving result, it is relatively undefined in conventional systems. With the electric and easy-to-use sieve stack tensioning system TorqueMaster you can deliver a constant and reproducible clamping forces of ~ 1 kN to the sieve stack, enabling the calibration of the sieve tensioning – essential when using your sieve shaker as an instrument for inspection according to ISO 9001. The sieve stack tensioning system TorqueMaster consisting of clamping lid plexiglas for test sieves 200 mm/8" dia. and electrical tool 100-240 V/1~, 50-60 Hz and can be combined with any sieve shaker. Standardized for integration into a quality management system according to ISO 9001 The high performance Vibratory Sieve Shaker Analysette 3 PRO
14.12.2020  |  3868x  |  Product news  | 
Filling of big bags in high-care zone combined with palletizing A new innovation by Dinnissen:  high-care bigbag filling and low-care fully automatic palletizing combined in one station.
Filling of big bags in high-care zone combined with palletizing
A new innovation by Dinnissen: high-care bigbag filling and low-care fully automatic palletizing combined in one station. Meet Dinnissen`s state-of-the-art technology for filling big bags in high-care zones. This innovation combines high-care filling with low-care palletizing. It complies with all requirements for high-care, medium-care, and low-care filling, processing, sealing, and transportation of Big-Bags. In addition, this solution is equipped with a fully automatic palletizing station. Characteristics and benefits * Contained filling process of Big-Bags * Densifying and weighing during filling on one position. * Creates stable `high` Big-Bags with no gas inclusions. * No hydraulics used in the high care zone * Triple seal and stretching spout technology to maintain oxygen level < 0,5% * One integrated solution for high care, medium care, and low care. * Designed, built, and tested in-house
14.12.2020  |  3278x  |  Product news  |   | 
Multiport FLEX TUBE DIVERTER TO HANDLE FLOUR
Multiport FLEX TUBE DIVERTER TO HANDLE FLOUR
A Vortex client produces various types of flour that need to be conveyed throughout the bakery, but with no cross-contamination. In this application, a Vortex Multiport Flex Tube Diverter was designed with (2) Two-Way Vortex Flex Tube Diverters and (2) Three-Way Vortex Flex Tube Diverters to pneumatically convey flour from four origins to six destinations. The Multiport configuration is actuated using a double acting air cylinder. The Flex Tube design ensures there is no cross-contamination between the differing grades, or batches, of flour. All material contact areas of the Flex Tube Diverter are constructed from aluminium or rubber. The 130mm hose is constructed from rubber approved by the food industry. Each diverter features a viewing window and a removeable access panel. The Multiport Diverter is rated for continuous service in 82° C.
14.12.2020  |  3460x  |  Product news  |   | 
A reliable & safe baler is an efficient solution
A reliable & safe baler is an efficient solution
"TENAX specializes in high-end plastics and services that create customer and corporate value" is the company’s mission statement and vision. TENAX is an International Group and Global Supplier with two manufacturing sites in the US (Maryland & Alabama), a distribution centre in California and 280 employees worldwide. For over 60 years, TENAX has provided specialty products for netting and fencing, pipe protection, construction, agricultural, gardening and DIY applications. The Facts TENAX was looking for a reliable and efficient baler to dispose of extruded fence nets and grids. The new baler would replace their highly inefficient baler which was prone to failures and had expensive repairs looming. They turned to the US subsidiary of the German manufacturer HSM GmbH + Co. KG for the solution to their problem. Established in 1960 in Italy, TENAX has seen steady production growth and continued success in many markets. Today, with production facilities in the US and
14.12.2020  |  662x  |  Product news  |   | 
NETZSCH Impact Mill Condux® Compact Innovation from proven technology and winner of the Food Tech Innovation Award 2020
NETZSCH Impact Mill Condux® Compact
Innovation from proven technology and winner of the Food Tech Innovation Award 2020 The jury of the Fi Europe Innovation Award has selected the fine impact mill Condux® Compact as the winner of the Food Tech Innovation Award for the most innovative technical processing solution for food ingredients. The award is a great recognition for NETZSCH and its development of the compact Condux® Compact impact mill, consistently meeting the requirements of the industry. The technology is available for trials with customer products in the NETZSCH laboratory. The idea of a compact grinding system is not new but existing solutions show significant disadvantages when it comes to cleaning efforts and hygienic design. NETZSCH has therefore improved the decisive points of its Condux® Compact plant concept once again: The footprint or space requirement of the compact plant is 80 % less than that of comparable standard grinding plants with the same throughput capacities. This also has an effect on the investment costs, which are approximately 30 % lower. By using
11.12.2020  |  3341x  |  Product news  |   | 
AirScrape solves the problem of harmful dust The problem of harmful dust at the conveyor transfer points could be solved convincingly by using the AirScrape. More than 60 conveyor transfer points in that plant were equipped with the AirScrape
AirScrape solves the problem of harmful dust
The problem of harmful dust at the conveyor transfer points could be solved convincingly by using the AirScrape. More than 60 conveyor transfer points in that plant were equipped with the AirScrape Spain: A well-known manufacturer of demanding surfaces made of stony material has also chosen the AirScrape in search of a sustainable solution to minimize emissions at belt transfers. First, a transfer point in one of the plants was equipped for test purposes. The measurements during the first test run and in the later process showed a minimization of dust generation of more than 80 % compared to before. The overall advantages in terms of efficiency, occupational safety and protection were so convincing that more than 60 transfer points in the company’s plants were equipped with AirScrape conveyor skirt sealing system. In correlation to the dust reduction, the health-related downtimes of the workforce, previously exposed to massive dust development, were also reduced.
11.12.2020  |  3620x  |  Product news  |   | 
Non-contact radar level measurement with NivoRadar® NR 3000 A leading supplier of building materials in South Africa was looking after a reliable continuous level measurement solution for his process hopper
Non-contact radar level measurement with NivoRadar® NR 3000
A leading supplier of building materials in South Africa was looking after a reliable continuous level measurement solution for his process hopper The application revolved along a train tippler that tips the contents of the train truck with coal into the hopper below which is then conveyed to the site. The measurement units have to meet the highly accurate demands and cope in the challenging environment. The mining sector in South Africa was once the primary driving force behind the history and development of Africa’s most advanced and richest economy. South African mining companies are key players in global industry and the country is the third largest coal exporter in the world. The plant operator has been producing cement, aggregates, lime, ready mix and fly ash since 1892 and now operates with 11 factories in South Africa, Botswana, DRC, Ethiopia, Rwanda and Zimbabwe. With regard to the modernization of the facilities close to Cape town he was looking after innovative continuous level measurement equipment. Due to the nature of the application, the electromechanical lot system, which is very popular
10.12.2020  |  4634x  |  Product news  |   | 
Alvibra - vibrating conveyors, vibrating feeders and vibrating sifters Alvibra A / S is a manufacturer of a wide range of vibratory conveyors, vibrating feeders and vibrating screen
Alvibra - vibrating conveyors, vibrating feeders and vibrating sifters
Alvibra A / S is a manufacturer of a wide range of vibratory conveyors, vibrating feeders and vibrating screen Alvibra In Remix Droge Mortel and many other projects, the systems and components from Alvibra and MBA Instruments proven to be very solid and reliable, reason for KEMP for both to represent manufacturers for the entire Benelux. The Danish company Alvibra A / S is a manufacturer of a wide range of vibratory conveyors, vibrating feeders and vibrating sifters as well as a series of electric and pneumatic vibrators. The vibratory conveyors, in open or closed version, are available in lengths up to 32 meters. The installations are low-noise, energy-efficient, compact and hygienic. She do not require vibration dampers or special foundations. Thanks to the ViFlex drive and VibraDrive technology continue to vibrate within the machine frame and are not transmitted to the floor. The machines are characterized by a fast and controlled start / stop cycle. Applications: Vibratory conveyors are ideally suited for sensitive products (such as dry mortar). They are easy to clean, if
10.12.2020  |  663x  |  Product description  | 
New production facility - Dorner was involved in the planning In the best case the conveyor system manufacturer Dorner is already involved in the conception of new production plants for its customers. This happened with a Hungarian poultry processor who planned a completely new poultry slaughterhouse which is implem
New production facility - Dorner was involved in the planning
In the best case the conveyor system manufacturer Dorner is already involved in the conception of new production plants for its customers. This happened with a Hungarian poultry processor who planned a completely new poultry slaughterhouse which is implem In the best case the conveyor system manufacturer Dorner is already involved in the conception of new production plants for its customers. This happened with a Hungarian poultry processor who planned a completely new poultry slaughterhouse which is implemented now. After initial contacts in March of this year with following project discussions, Dorner was able to provide some technical advices from Jülich with high values for the customer. In addition to the right plant design, the high hygienic requirements for the plant were very important. After the poultry has been slaughtered and sliced, the poultry has been transported with a Dorner stainless conveyor to the next processing step. The selected AquaPruf 7400 Ultimate belt conveyors are not only particularly strong also they have optimal hygienic properties: among other things, a continuous WIG welded 304 stainless steel frame, FDA-approved components, tool-free assembly for cleaning as well as the selection
09.12.2020  |  2525x  |  Press release  | 
Food processor - cooking and roasting with screw heat exchanger
Food processor - cooking and roasting with screw heat exchanger
Köllemann has been associated with efficient solutions in the fields of conveyor, process and environmental technology for decades. Our success has been evolving due to our innovative mechanical engineering designing that perfects the principle of the screw flights. Our success is based on our ever innovating mechanical engineering designs, perfecting the worm shaft to a new variety of applications. Our Research and Development came up with a solution for the food industry as also for manufacturers of animal food. We have been concentrating on those, who continuously prepare minced meat which is mixed with other ingredients in a process. Our Köllemann self-cleaning screw heat exchanger is our answer to process technology offering several advantages. Mixing, dosing, cooking, frying, conveying in one operation The Köllemann screw heat exchanger (SWT) is the first choice, wherever preparations must be cooked and fried, ingredients added, perfectly mixed, chopped
08.12.2020  |  3436x  |  Product news  | 
Screwdriving technology made easy DEPRAG presents lightweight SFM for lightweight robots
Screwdriving technology made easy
DEPRAG presents lightweight SFM for lightweight robots The increasing diversity of products, smaller batch numbers and shorter product life cycles all present new challenges for assembly. Automated processing steps are often uneconomical for small or medium-sized companies as they involve high costs. However, with the development of lightweight robots over the last few years, hopes have been raised. Manual assembly tasks can now be technically supported at a reasonable cost, thus utilising previously inaccessible automation potentials. Entirely new possibilities have opened up for assembly through the use of lightweight robots. Low investment costs enable the fast, economical implementation of applications: Robots with a low load capacity are significantly more affordable and the total size of the system or machine is substantially reduced when using smaller robots. Applications of this kind require assembly tools of an equivalently light weight. DEPRAG SCHULZ GMBH u. CO., renowned for their decades of experience in screwdriving
07.12.2020  |  3492x  |  Product news  | 
New generation of belt alignment, the PrimeTracker The conveyor belt is one of the most expensive components of belt conveyors. Poor belt alignment leads to excessive wear and inevitably to early replacement, resulting in high replacement costs and short service lives.
New generation of belt alignment, the PrimeTracker
The conveyor belt is one of the most expensive components of belt conveyors. Poor belt alignment leads to excessive wear and inevitably to early replacement, resulting in high replacement costs and short service lives. Minimum wear – long service life The new PrimeTracker works unlike conventional belt alignment systems. Due to its unique design, it acts like a standard conveyor belt roller when the belt runs smoothly and only intervenes when the belt leaves its optimum position. The PrimeTracker responds before the guide roller tilts horizontally. As soon as the conveyor belt runs off-centre, the PrimeTracker corrects the movement with small forces and very low friction, thus preventing unnecessary wear. Effect of the PrimeTracker in case of belt misalignement The specially developed maintenance-free mounting of the PrimeTracker allows a change of the rotating roller‘s axis position in all directions. The rubberized cylinder body can tilt and swing. With soft pressure, it provides continuous guidance over the complete contact surface. The PrimeTracker is physically designed to detect even the slightest deviation in the belt run from the optimum line and to react with the
07.12.2020  |  3944x  |  Product news  |   | 
Pharmaceutical technology The Power of Electrifying Ideas
Pharmaceutical technology
The Power of Electrifying Ideas In pharmaceutical production plants, medicines are manufactured under strict production criteria. The equipment and devices required for this purpose have to meet high requirements when it comes to surface condition and the absence of gaps. Through special manufacturing processes, Schniewindt is fully prepared for these requirements.
07.12.2020  |  619x  |  Product description  |   | 
ISO 20560: a global standard to identify pipe contents
ISO 20560: a global standard to identify pipe contents
A new, global ISO 20560 norm is now available to standardise the identification of hidden and often hazardous pipe contents in factories and facilities. Compliant pipe markers are already offered by Brady Corporation. Clear pipe identification for increased safety In response to the growing international mobility of labour, the ISO 20560 norm aims to increase workplace safety and to reduce risks and training costs for international personnel on country-specific pipe marking standards. The new, international pipe marking norm uses globally accepted GHS/CLP icons on a highly visible yellow area to visually signal danger to employees, international contractors and first responders. The new standard also specifies pipe marker size based on pipe diameter to support visibility from a distance. Reliable on any pipe in many environments Brady Corporation already offers ISO 20560-compliant designs on industrial-grade pipe marker materials. They will stay attached and
03.12.2020  |  4203x  |  Press release  | 
Efficient innovations in the Powder/PVC dosing area, even in COVID tim WXOmega revised batch mixer for powder components with extended throughput and amount of components
Efficient innovations in the Powder/PVC dosing area, even in COVID tim
WXOmega revised batch mixer for powder components with extended throughput and amount of components After the WXOmega powder mixer was released in spring 2019, the system immediately became a "best seller". Indeed, requests for higher batch weights and throughputs have increased rapidly since last year. Same as the requests for more than 6 different ingredients per recipe. Process Control recognized and reacted - now batch volumes of up to 95 dm³ and throughputs of up to 1000 kg / h are available. The number of max. possible ingredients increased from 6 to 8. The new WXOmega batch blender is able to dose and homogenize the most divers powders, grids, flakes or granulates – all with the well-known Process Control accuracy. The dust-tight blender has a thoughtful, compact construction. All ingrediences-touching parts are made of 1.4301 stainless steel. The separately to connect powder feeders are equipped with special dosing augers and “bridge-breaking” systems. The weight hopper was revised with a new, integrated empty- and discharge support. The
02.12.2020  |  10534x  |  Product news  | 
MORE POSTS
NOV
2020
OCT
2020
SEP
2020
AUG
2020
JUL
2020
JUN
2020
MAY
2020
APR
2020
MAR
2020
FEB
2020
JAN
2020
DEC
2019
PORTALS
BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising
FOLLOW US
Linked