Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

     

EVENT
16.02.2022 - 17.02.2022
Share this event
Type: Trade show
Duration: 2 days
Starts: 16.02.2022
Ends: 17.02.2022
Place: Dortmund

Entry: Free (after registering)

SOLIDS Dortmund

Trade show

National and international exhibitors present their technologies and solutions for the processing, handling, storage, transport and analysis of powders, granules and bulk solids. Our trade visitors are top decision-makers and buyers searching for specific solutions, and come from processing industries such as mechanical and plant engineering, chemicals, pharmaceuticals, mining, stone and earth extraction, food and feed, metal, glass and recycling. More information you will find in our exhibitor catalogue

At the same time, the 6th RECYCLING-TECHNIK Dortmund – Trade show for recycling technologies – will take place.

Become part of the business platform in the heart of the industry.
 

Event organizer

Participants

4B DeutschlandAGRICHEMA Schüttguttechnik GmbH & Co. KGAMMAG GmbH Schüttguttechnik, SprühgranulationBEUMER Group GmbH & Co. KGBormann & Neupert by BS&BBückmann GmbH & Co. KGCADFEM GmbHDec Group - Dietrich Engineering Consultants SADinnissen Process TechnologyDMN Schüttguttechnik GmbHDYNA Instruments GmbHEngelsmann AGESTA Apparatebau GmbH & Co. KG
Flexco Europe GmbHGEFA Processtechnik GmbHGKM Siebtechnik GmbHGlatt Ingenieurtechnik GmbHHosokawa Micron B.V.HS Umformtechnik GmbHInfastaub GmbHKöllemann GmbH Förder-. Prozess, & UmwelttechnikLödige Process Technology (Gebr. Lödige Maschinenbau GmbH)Merz Aufbereitungstechnik GmbHMOLLET Füllstandtechnik GmbHMTS MessTechnik Sauerland GmbHOpdenhoff Technologie GmbH
PMT Powder Maker Group GmbHPUCEST protect GmbHREMBE® GmbH Safety + ControlRHEWUM GmbHRice Lake Weighing Systems EuropeScrapetec-Trading GmbHSimatek Bulk Systems A/SSympatec GmbHT & B electronic GmbHTBMA EUROPE B.V.Tridelta Siperm GmbHVan BeekVortex

Related items

The AirScrape® has landed. In Australia. Kinder Australia Pty Ltd is adding AirScrape® non-contact side sealing to its range.
The AirScrape® has landed. In Australia.
Kinder Australia Pty Ltd is adding AirScrape® non-contact side sealing to its range. The AirScrape® Has Landed is the title of the newstory on the website of Kinder, one of the leading providers for conveyor components in the Pacific region. The impressive progress of the AirScrape® with its contact-free and dust-minimizing mode of operation has long been observed by Kinder. They were particularly impressed by the YouTube videos about the use of the innovative conveyor skirting. The AirScrape® as a side seal and the TailScrape® as a rear seal for transfer points effectively complement Kinder’s portfolio in the area of conveyor systems and skirting. With this, Kinder offers its customers in Australia, New Zealand and Indonesia a real innovation in the field of conveyor belt seals, which also promises a high level of cost-effectiveness. In addition to Europe, Africa and America, the AirScrape® will now be available in the Asia-Pacific region. At ScrapeTec Trading GmbH from Kamp-Lintfort in Germany, they are proud to have made a “precision landing”
27.08.2021  |  197x  |  Press release  |   | 
IE-Node - the future of hazard monitoring Utilizing industrial Ethernet and cloud connectivity to share real-time sensor data, alongside historical analytics, with your PLC of choice.
IE-Node - the future of hazard monitoring
Utilizing industrial Ethernet and cloud connectivity to share real-time sensor data, alongside historical analytics, with your PLC of choice. 4B’s IE-Node is the future of hazard monitoring. Utilising industrial Ethernet and cloud connectivity to share real-time sensor data, alongside historical analytics, with your PLC of choice — the IE-Node is truly intelligent. Sample code for a variety of PLC brands is available to help you connect your entire system and keep every component in constant communication for unprecedented hazard protection. The IE-NODE operates by reading its sensor inputs and sending processed data when requested by another system (e.g. PLC). The units are equipped with an RJ45 Ethernet socket and supports PROFINET, EtherNet/IP and Modbus TCP/IP protocols for easy integration with Siemens, Allen-Bradley Rockwell, Modicon and other PLC’s or automation devices. The IE-NODE’s network configurator software provides a visual view of all devices on the network. It allows for easy identification of each unit on the network and allows for network settings to be changed as needed.
12.08.2021  |  153x  |  Product news  |   | 
VdS-certified fire protection concept for belt dryers For the first time, T&B is preparing a certified protection concept in cooperation with VdS
VdS-certified fire protection concept for belt dryers
For the first time, T&B is preparing a certified protection concept in cooperation with VdS The drying of materials is often the prerequisite for their further processing. The drying process, i.e. the thermal removal of water and other liquids, makes the dried goods durable, mixable, grindable or otherwise usable for further process steps. Drying processes have been industrial standard for many decades already. The first belt dryer in Europe, for example, went into operation as long ago as 1907. These days, belt dryers are used in a wide range of different branches. Examples include belt dryers for timber, pharmaceuticals, food, plastics, wastewater sludge and many other organic substances. All these substances have one thing in common: they are combustible and, in combination with a belt dryer, result in a high fire load. The importance of belt dryers in industrial applications has increased significantly over the past few years. Generally, standard series belt dryers have a modular design. They are made up of a product feeding module, a drying module
11.08.2021  |  428x  |  Specialist article  | 
Maintenance-free conveyor skirtings conquer the mining world Efficiency at its Best Dust-, spillage- and maintenance-free Conveyor Skirtings supplied from Kamp-Lintfort, Germany conquer the World of Mining
Maintenance-free conveyor skirtings conquer the mining world
Efficiency at its Best Dust-, spillage- and maintenance-free Conveyor Skirtings supplied from Kamp-Lintfort, Germany conquer the World of Mining Companies whose daily operations include extraction, processing, crushing and screening of materials are familiar with the problems at the transfer points in conveying systems, such as nuisance dust generation, disruptive material spillage, costly belt wear, maintenance work that impedes operation and constant cleaning required. Even conventional chute skirtings or conveyor belt skirtings do not help to overcome these problems. For more than 8 years already, ScrapeTec from Kamp-Lintfort, Germany with its specific products has been providing effective solutions to all these problems. ScrapeTec products as e.g. AirScrape, DustScrape and TailScrape are applied individually or in combination and serve as side skirtings or belt skirtings, for example. They are used by large and small companies - in many countries around the world. Also in Chile and Peru. AirScrape®. Dust-free – worldwide. ScrapeTec Trading GmbH started with the AirScrape as its first product. Wilfried
21.07.2021  |  535x  |  Product news  |   | 
NEUMAN & ESSER Process Technology by GKM
NEUMAN & ESSER Process Technology by GKM
GKM started a partnership with NEUMAN & ESSER Process Technology in 2018. The target was to combine GKM’s expertise in safety screening with the extensive knowledge and experience NEUMAN & ESSER has gained in powder coating. Watch the video which shows the result, the first screening machine KTS-VS2 designed and developed specifically for the requirements of the powder coating industry.
13.07.2021  |  269x  |  Press release  | 
Nachhaltiges Nährstoffrecycling aus organischen Reststoffen
Nachhaltiges Nährstoffrecycling aus organischen Reststoffen

This item is only available in German
23.06.2021  |  236x  |  Press release  | 
Preis des Ostdeutschen Wirtschaftsforums für Glatt Ingenieurtechnik
Preis des Ostdeutschen Wirtschaftsforums für Glatt Ingenieurtechnik

This item is only available in German
18.06.2021  |  346x  |  Press release  | 
Trocknung und Produktgestaltung in der Vakuumwirbelschicht
Trocknung und Produktgestaltung in der Vakuumwirbelschicht

This item is only available in German
11.06.2021  |  492x  |  Specialist article  | 
Vortex Handslide Gate Assists at Bourbon Distillery
Vortex Handslide Gate Assists at Bourbon Distillery
A bourbon distillery needed a method to control the flow of grains into the cookers. The Vortex Handslide Gates were instrumental in introducing milled corn, malt, and rye to the start of the distilling process in this plant. The Handslide Gates are manually operated process gates used to control flow on the inlet/outlet of hoppers, bins or totes in applications where powered gates are not feasible or desired. The manual double-handles are accessible on both ends for an effective push-pull operation. The frame, flanges and safety cover on these 101 mm (4”) gates are made from aluminium, while the blade and all material contact areas are made from 304 stainless steel and polymer.
11.06.2021  |  570x  |  Product news  | 
First German plant for recycled phosphate fertilizer in operation Glatt PHOS4green plant for fertilizer production with phosphorus from sewage sludge ash at Seraplant in Haldensleben, Saxony-Anhalt, Germany started up
First German plant for recycled phosphate fertilizer in operation
Glatt PHOS4green plant for fertilizer production with phosphorus from sewage sludge ash at Seraplant in Haldensleben, Saxony-Anhalt, Germany started up Residue-free production of ready-to-use fertilizer from phosphate-containing sewage sludge ash is now possible, thanks to plant manufacturer and process expert Glatt Ingenieurtechnik, and fertilizer specialist Seraplant. After a 20-month construction period, the first production plant for phosphate-containing mono and complex fertilizers made from recycled sewage sludge ash is now in operation. Seraplant operates the new plant at its headquarters in Haldensleben, Saxony-Anhalt, Germany. Glatt Ingenieurtechnik, a globally active plant engineering company, was responsible for the process development and construction. The official commissioning on May 31, 2021, was attended by Prof Dr Armin Willingmann, Saxony-Anhalt’s Minister for Economics, Science and Digitalization. Seraplant invested more than 20 million euros in the new production facility, with the support of the state of Saxony-Anhalt. As a result, more than 20 new jobs have been created in the southern
08.06.2021  |  390x  |  Product news  |   | 
Scrapetec Homepage is now available in Spanish The reasons: Strong interest in AirScrape and more and more orders from South America.
Scrapetec Homepage is now available in Spanish
The reasons: Strong interest in AirScrape and more and more orders from South America. The decision was made quickly to offer the website in Spanish as well. After Peru, there is now more and more interest in Scrapetec products coming from Chile. After the second largest copper and molybdenum producer in the world, the Codelco company from Chile, had listed the AirScrape, the first large orders came straight away. CODELCO Chuquicamata is one of the world’s most important copper mines and is now also using the new conveyor skirting, the AirScrape. Codelco was quickly convinced of the advantages of the AirScrape. The new conveyor skirting works without contact and therefore does not wear out. The advantages are obvious, no wear, no maintenance and the function of the conveyor skirting is guaranteed for years.
05.06.2021  |  361x  |  Press release  |   | 
Underrated TailScrape The possibility to close a conveyor transfer point completely. with the new conveyor skirting TailScrape.
Underrated TailScrape
The possibility to close a conveyor transfer point completely. with the new conveyor skirting TailScrape. The problem with the conveyor belt transfer is known. Even if you get the sides and tail of a transfer point closed, the corners are still totally open. The corner where the side seal does not match the tail seal. The combination of the new AirScrape seal skirting with the TailScrape is the perfect solution for your transfer points. The corners are completely closed and the advantage is that the TailScrape also works without contact to the belt, the seals no longer wear and do not need any maintenance. Perfect conveyor skirting solution for your transfer points. Call us and let us suggest a solution.
31.05.2021  |  794x  |  Press release  |   | 
AirScrape, the new conveyor skirting for cement plants in Indonesia The AirScrape is a non-contact concept, meaning no friction, no wear.  Transfer points free of dust and spillage, without maintenance.
AirScrape, the new conveyor skirting for cement plants in Indonesia
The AirScrape is a non-contact concept, meaning no friction, no wear. Transfer points free of dust and spillage, without maintenance. After some mining companies, cement plants and ports had tested the AirScrape, the TailScrape and also the DustScrape for a trial at their conveyor transfers, they now wanted more of that. Non-contact concept The new chute seal impresses with its non-contact concept. Without contact and without friction, the AirScrape conveyor belt seal skirting does not wear out and can thus keep the transfer points free of dust and spillage, without maintenance. The benefits can be seen after just a few weeks, pleasing everyone responsible for the conveyor systems. AirScrape and TailScrape First, the transfer is equipped with the AirScrape and the TailScrape, and then, should dust still escape to the front, the calming zone is extended with the DustScrape. The DustScrape tunnel is completely equipped with a filter cloth and thus only allows the excess air to escape. The fine material remains in the calming zone or on the belt. Deliveries to Indonesia A simple and
12.05.2021  |  615x  |  Product news  |   | 
Dustfighter for a clean conveyor transfer point With AirScrape, TailScrape, DustScrape and  the PrimeTracker, Scrapetec focusses to fight against dust, spill and unnecessary work at the conveyor transfer points.
Dustfighter for a clean conveyor transfer point
With AirScrape, TailScrape, DustScrape and the PrimeTracker, Scrapetec focusses to fight against dust, spill and unnecessary work at the conveyor transfer points. Active with the new products on the market since 2016 and with a small team. These are products that work according to a new concept with the aim of making the conveyor belt transfers free of dust and spillage. All without maintenance. The advantages of the AirScrape, TailScrape, DustScrape and recently also the PrimeTracker get around. There is a lot going on here about word of mouth and recommendations, worldwide. World-wide Once installed, you can quickly see the advantages and the opportunity to save time and money. A chute seal that works without contact to the belt and therefore no longer wears out is unique. There is no continent that is not supplied by ScrapeTec. Of course, the maintenance-free conveyor belt seal is the driving force behind it, but in cooperation with the other products it becomes a complete solution that makes the conveyor belt transfers clean and maintenance-free.
30.04.2021  |  614x  |  Product news  |   | 
GKM Siebtechnik now offers a virtual trade show visit Because of the lockdown, GKM Siebtechnik now shows it’s machines in a virtual tour. You can watch videos and download brochures and data sheets.
GKM Siebtechnik now offers a virtual trade show visit
Because of the lockdown, GKM Siebtechnik now shows it’s machines in a virtual tour. You can watch videos and download brochures and data sheets. Because of the spread of the Covid 19 our national and international trade shows have been cancelled in 2020 and also for this year. Nevertheless, GKM Siebtechik does not want to miss the opportunity to welcome customers and interested parties at the booth and to present GKM screening machines and new products. Therefore, on the website of GKM Siebtechnik, there is the possibility to get to know the machines during a virtual tour of the booth and to watch and download videos and brochures or data sheets. Of course, all open questions will also be answered there via a live chat. If an individual appointment for a guided tour or further information is desired, an appointment can be made with a screening expert at any time. Even though a virtual booth may not replace interpersonal contact, GKM would like to offer customers and interested parties the opportunity to get to know the products and innovations and to have a professional exchange. The new virtual booth of
16.04.2021  |  914x  |  Press release  | 
Multi-stage thermal treatment sterilizes product Dinnissen Process Technology has developed an extremely effective thermal treatment for feed, pet food and food: the thermidor-System. It reduces the population of microbes by 99.999%.
Multi-stage thermal treatment sterilizes product
Dinnissen Process Technology has developed an extremely effective thermal treatment for feed, pet food and food: the thermidor-System. It reduces the population of microbes by 99.999%. Multi-stage thermal treatment solution Preventing contamination (e.g. Salmonella) is of utmost importance when processing feed, pet food and food. A few years ago Dinnissen Process Technology introduced their Thermidor-system: a multi-stage thermal treatment solution, as the most effective way to sterilize product while maintaining product homogeneity. It reduces the population of microbes by 99.999%. Not using acids and chemicals Today, most producers prefer this thermal treatment by steam injection over liquid treatments with acids and chemicals. The main reason for this is that chemical treatments leave traces of chemicals (e.g. chlorine with it specific smell) in the product. Additionally, these liquids can change the structure of the product and lead to segregation of the product. Steam injection The Thermidor-system ensures that product composition remains perfectly homogeneous after cooling, heating and drying. This way producers can guarantee their
13.04.2021  |  543x  |  Product news  | 
Glatt Ingenieurtechnik celebrates continued business success  Plant engineering expert Glatt Ingenieurtechnik marks its 30th anniversary with an investment in the future of its headquarters
Glatt Ingenieurtechnik celebrates continued business success
Plant engineering expert Glatt Ingenieurtechnik marks its 30th anniversary with an investment in the future of its headquarters From vitamins in animal feed and enzymes in detergents to powder materials for high-performance batteries, Glatt, the Germany-based plant manufacturer and process expert, is working on all of these in close cooperation with renowned research companies. In spring 2021, Glatt will expand its technology center in Weimar for the third time in twelve years. Precision landing: Special plant engineering For more than three decades, Glatt Ingenieurtechnik has been by its customers’ side, from laboratory through to production. These collaborations sometimes lead to ground-breaking new systems that have never previously been considered or designed. Some of these are available at the company’s headquarters in Weimar, which is why the plant manufacturer has expanded its technology center several times in recent years. The latest developments include, for example, a fluid bed system made entirely of glass for processing special materials with the highest purity demands
23.03.2021  |  671x  |  Press release  | 
Four-way wye line diverters to handle protein pulver
Four-way wye line diverters to handle protein pulver
In this application, a Danish producer of animal protein solutions for the food and beverage industry will utilize seven four-way Vortex Wye Line Diverters to divert the flow of protein pulver in the production of food products. The Vortex Wye Line Diverter features an aluminum valve body with live-loaded, wear-compensating seals with a 304 stainless steel blade. Inlet and outlet weldments are constructed from 304 stainless steel and material contact areas are 304 stainless steel and polymer. The inlet features a straight-through conveying line design for easier “in-line” installation of multiple diverters. The diverter’s double acting air cylinder actuator is equipped with a magno-piston for use with magnetic reed position indication switches.
16.03.2021  |  716x  |  Product news  |   | 
Perfect belt alignment, 360 degrees movement Sensitive correction without any potential for destruction, simple belt centering, the PrimeTracker.
Perfect belt alignment, 360 degrees movement
Sensitive correction without any potential for destruction, simple belt centering, the PrimeTracker. Plant operators know it, the annoying belt misalignment, because it is not rare. It occurs almost inevitably when drums and rollers are not well adjusted and aligned, or when they are worn, transverse forces act due to an asymmetrical task of the conveyed material or uneven belt connections are present and have to be compensated. To solve problems with misalignment on conveyor systems, there are numerous variants of different belt guide rollers that aim for the belt to run straight ahead.With this claim, the so-called PrimeTracker is now also being launched in the German market. Developed by the Swedish engineer Bertil Wahren, this special role has recently been part of the sales program of ScrapeTec Trading GmbH at his express request. The partnership is no coincidence, because the experienced technician Wahren and the specialists from ScrapeTec have been in a lively professional exchange for several years. What both sides have in common is that they leave well-known
16.03.2021  |  611x  |  Product description  |   | 
4B Drehzahl-Sensoren für Elevatoren und Transportbandförderer  4B Speed Sensors for Elevators & Conveyors
4B Drehzahl-Sensoren für Elevatoren und Transportbandförderer
4B Speed Sensors for Elevators & Conveyors M300x Schlupf-Sensor, M100x Stopswitch, Milli-Speed Switch, M800 Speed-Switch, Whirligig Rotationsadapter, Speedmaster - Geschwindigkeitssensor-Kalibrierungs- und Testgerät
08.03.2021  |  407x  |  Photo reportage  | 
Seal Tite Diverter to Handle Soybeans in The Netherlands Vortex supplied two 3-Way Seal Tite Diverters with an opening of 500 mm x 750 mm and a weight 544 kg, powered by explosion-proof electric actuators.
Seal Tite Diverter to Handle Soybeans in The Netherlands
Vortex supplied two 3-Way Seal Tite Diverters with an opening of 500 mm x 750 mm and a weight 544 kg, powered by explosion-proof electric actuators. Two identical Vortex 3-Way Seal Tite Diverters were bespoked to divert soybeans from a screw conveyor to a load out station in a grain elevator in The Netherlands. The large diverter opening is 500 mm x 750 mm and weighs 544 kg. The two blades inside this Seal Tite Diverter are each powered by explosion-proof, quarter-turn electric actuators (380V/3PH/50HZ). While the blades and valve body are constructed from carbon steel, the material contact areas contain replaceable abrasion resistant, steel liners (400 BHN). A side panel allows access to the diverter interior for inspection or maintenance without having to remove the diverter from place. The inlet flange matches the customer’s custom bolt-hole pattern.
17.02.2021  |  1156x  |  Product news  |   | 
PrimeTracker with special corrugated hose Longlife Tracking System without maintenance, new PrimeTracker.
PrimeTracker with special corrugated hose
Longlife Tracking System without maintenance, new PrimeTracker. Scrapetec Trading relies again and again on long-lasting products, which should solve the customer’s problems in the long term and maintenance-free. He shouldn’t waste any more thoughts on the subject of spills and dust, instead there is the well-known non-contact and wear-free "AirScrape" conveyor skirting. And that the belt always arrives perfectly guided at the transfer points, there is now the new maintenance-free tracking system, the PrimeTracker in the Scrapetec portfolio. This is designed in such a way that, compared to the known tracking systems, it serves the customer for years without friction, without wear and without maintenance. The core, the PrimePivotBush of the PrimeTracker is protected with a special sleeve that will last for years even against very aggressive materials. Why hard when it can be so easy.
17.02.2021  |  1397x  |  Product news  |   | 
New pressure-resistant GKM screening machine KTS-VP2 600  New pressure-resistant GKM screening machine KTS-VP2 600 for control screening in pneumatic conveying streams
New pressure-resistant GKM screening machine KTS-VP2 600
New pressure-resistant GKM screening machine KTS-VP2 600 for control screening in pneumatic conveying streams The majority of raw materials from various industries exist in the form of powder or granules, these are generally stored in transport or storage silos. As it is possible for the raw materials to contain impurities, agglomerates, or tramp material the unfortunate consequences of this are them finding their way into the process flow which in turn results in a loss of production due to machine & system emptying and clean down. The implication of this being – product rejection/recalls at the point when the impurities reach the end product. The use of check sifters/sieves is an effective way to police the powders & ultimately prevent these issues from occurring. As the typical transfer of such raw materials between silos or the loading and unloading of trucks is carried out by pneumatic conveying this can create an overpressure in the conveying system, this is why a gravity screening machine cannot be used for this purpose. In order to ensure smooth conveying,
16.02.2021  |  713x  |  Product news  | 
UWT GmbH sucht Sie als Unterstützung in diversen Bereichen
UWT GmbH sucht Sie als Unterstützung in diversen Bereichen

This item is only available in German
15.02.2021  |  855x  |  Job vacancy  |   | 
FILLED
Video - How to use the UWT products for level control Solution for the food & beverage industry
Video - How to use the UWT products for level control
Solution for the food & beverage industry UWT supply level limit and continuous measurement sensors for bulk solids and liquids. Different measurement techniques are used depending on the medium and application in question. A distinction is made between continuous level measurement and point level detection. Furthermore, we offer complete systems for level monitoring and visualisation, working together with our customers to set up the installation and commissioning of our products. Customers around the world value us for our tailor-made solutions. Accordingly, we can manufacture complete system solutions to individual customer requirements. Our level sensors are characterised by their reliability, easy handling and long service life.
10.02.2021  |  1055x  |  Press release  |   | 
New - PrimeTracker - new belt alignment tracking system Why does the PrimeTracker reacts that fast and works without friction and wear?
New - PrimeTracker - new belt alignment tracking system
Why does the PrimeTracker reacts that fast and works without friction and wear? The PrimeTracker looks the same, but works totally different- Works totally flexible, tilt and swing in all directions, that is the reason that the PrimeTracker react and steers faster, has 100% contact with the belt and works friction and wear free. Fast conveyor belt alignment. More infos, please let us know, or just test the PrimeTracker now.
22.01.2021  |  2181x  |  Product news  |   | 
Chain Conveyor Upgrade - Corrosive Products Problem with chain conveyors in corrosive application solved through use of the right components.
Chain Conveyor Upgrade - Corrosive Products
Problem with chain conveyors in corrosive application solved through use of the right components. Customer was struggling with their conveyors transporting a corrosive by-product of crude oil processing. The chain was breaking and wearing fast, causing much downtime. 4B heavy duty links with corrosion-resistant pins and circlips improved the conveyor life by at least 50%. Challenge The customer was struggling with the life of the chain inside their chain conveyors. The chain conveyors where transporting a by-product of crude oil processing and wearing extremely fast. The wear was mainly due to the corrosive nature of the product and the strength of the chain installed. The corrosion was wearing the chain links and pins quite rapidly and the low chain strength lead to rapid elongation of the links. These 2 issues combined resulted in many chain breaks and a lot of production time loss to maintenance on the conveyors. SOLUTION Use of 4B142HAD chain links with pins in AISI420 and circlips in AISI304. These pins had a higher resistance to corrosion and the
19.01.2021  |  1517x  |  Product news  | 
Level measurement and monitoring in plastic raw materials Measurement technology Rotonivo® and NivoBob® combined with data visualisation NivoTec®
Level measurement and monitoring in plastic raw materials
Measurement technology Rotonivo® and NivoBob® combined with data visualisation NivoTec® Modern, high-quality technologies ensure a continuous stress-free manufacturing process in plants. When it comes to detecting fill levels in silos and material processing operations, sensors with a high level of compatibility for different process containers provide the optimum support for a smooth process. Depending on the processing stage, the material to be controlled can be of very different nature and place different demands on the measurement technology to be used. Users from different industries with a number of scattered storage silos consider it increasingly necessary for their plants to be equipped with automated visualisation and monitoring of the data in addition to continuous measurement of the fill levels. Modern solutions for efficient storage processes In order to guarantee a professional solution in terms of precision and process reliability for content measurement during the various stations in the manufacturing process to support a production
18.01.2021  |  787x  |  Product description  |   | 
Seal tite diverter provides solution for uk pet food company
Seal tite diverter provides solution for uk pet food company
Based in North Scarle, Lincolnshire, UK, Grove Pet Foods is a respected manufacturer of high-quality pet foods. Grove Pet Foods has complete control over the manufacturing process from raw materials entering the site to distribution of finished packs, they can provide an unrivaled range of scientifically formulated recipes to satisfy all species and breeds. This client’s manufacturing process includes bulk storage, bulk material discharge and transfer of raw material for pet food production. The client had a need to replace a flap type diverter valve which had been in service for a considerable period of time. The existing diverter valve had reached the end of its service life and was difficult to clean and maintain due to its design. The new diverter design had to cope with a variety of sticky and abrasive feed material, with easy access for cleaning and maintainability, whilst being fast acting to allow reject material from a metal detector to be diverted out
18.01.2021  |  1121x  |  Product news  |   | 
Most inexpensive level control worldwide Reliable level control with inspection window MOLOSvisu W070 from MOLLET Füllstandtechnik
Most inexpensive level control worldwide
Reliable level control with inspection window MOLOSvisu W070 from MOLLET Füllstandtechnik The simplest instruments provide often the most appropriate solutions. This wisdom is also true when it is concerned with applications for the level control of bulk solids for example in dosing hoppers, funnels, containers or pipes. Is there a possibility to control the filling level with an absolutely maintenance-free device even in difficult circumstances, with highest reliability and a long lifetime? Yes, the MOLOSvisu W070 from MOLLET Füllstandtechnik GmbH is suitable for full, demand or empty detection in dusty, powdery, granulated or grained bulk goods with any kind of density. The compact inspection window made of crystal clear Makrolon enables a reliable level indication even with rather limited mounting space and can be installed directly into the storage container or with an appropriate flange. With the robust MOLOSvisu inspection windows the actual filling level can be made visible from the outside. In this way you can to keep an eye on it at all times.
15.01.2021  |  956x  |  Product news  | 
Capacitive RFnivo® probe with full coating protection Point level dtection with RFnivo® coated with Protection Plus with innovative corrosion
Capacitive RFnivo® probe with full coating protection
Point level dtection with RFnivo® coated with Protection Plus with innovative corrosion In power plants, the demands made on the fill level sensors can be very high due to the fact that the sensors come into contact with aggressive media such as sulphur oxides, heavy metals or even acids. Where limit switches are used for dust detection in flue gas cleaning, they need to be robust enough in order to deliver reliable and consistent performance. Often maintenance costs or replacement of these sensors can be very high due to their quality not being adequate to meet the demands and so they achieve only a short operating life. This is particularly evident in measurement tasks in flue gas cleaning within waste incineration plants. Longer service life due to increased corrosion resistance UWT has further developed the RFnivo® 3100 capacitive level limit switch for this type of measurement task in the dust extraction of flue gases so that it meets and withstands the demanding conditions. All process-contacting parts of the sensor have been designed to be completely
14.01.2021  |  690x  |  Product description  |   | 
AirScrape conveyor belt skirting, the first installation Case-Study. Worldwide practical application experience and here the first installation of the first contact free conveyor belt skirting. Since installation nor friction, no wear, no maintenance, no dust, no spillage.
AirScrape conveyor belt skirting, the first installation Case-Study.
Worldwide practical application experience and here the first installation of the first contact free conveyor belt skirting. Since installation nor friction, no wear, no maintenance, no dust, no spillage. Already in 2012, in response to a specific operator requirement, Wilfried Dünnwald, inventor of this technology, developed the prototype of the AirScrape. The conveyor belt skirting system worked perfectly from the first minute, is still reliably in use today and was ultimately a major factor in the founding of ScrapeTec Trading GmbH. The AirScrape systems installed on plants in various industries now protect about 1,000 belt transfers worldwide. Parallel to the interest in these units, the number of contractual partnerships is also growing. Trained specialists are on the road everywhere to ensure installation and service. Here is one selected example: Germany: The solution was perfectly convincing for the operators of a dolomite processing plant, who regularly had to deal with dust and material losses at the transfer from the rotor crusher to the belt. Material spills in the ton range and enormous dust generation were an annoying standard. In addition, there were
27.12.2020  |  1516x  |  Product news  |   | 
AirScrape solves the problem of harmful dust The problem of harmful dust at the conveyor transfer points could be solved convincingly by using the AirScrape. More than 60 conveyor transfer points in that plant were equipped with the AirScrape
AirScrape solves the problem of harmful dust
The problem of harmful dust at the conveyor transfer points could be solved convincingly by using the AirScrape. More than 60 conveyor transfer points in that plant were equipped with the AirScrape Spain: A well-known manufacturer of demanding surfaces made of stony material has also chosen the AirScrape in search of a sustainable solution to minimize emissions at belt transfers. First, a transfer point in one of the plants was equipped for test purposes. The measurements during the first test run and in the later process showed a minimization of dust generation of more than 80 % compared to before. The overall advantages in terms of efficiency, occupational safety and protection were so convincing that more than 60 transfer points in the company’s plants were equipped with AirScrape conveyor skirt sealing system. In correlation to the dust reduction, the health-related downtimes of the workforce, previously exposed to massive dust development, were also reduced.
11.12.2020  |  848x  |  Product news  |   | 
Prozess- und Produktstabilität durch Materialkenntnis
Prozess- und Produktstabilität durch Materialkenntnis

This item is only available in German
10.12.2020  |  813x  |  Specialist article  |   | 
New generation of belt alignment, the PrimeTracker The conveyor belt is one of the most expensive components of belt conveyors. Poor belt alignment leads to excessive wear and inevitably to early replacement, resulting in high replacement costs and short service lives.
New generation of belt alignment, the PrimeTracker
The conveyor belt is one of the most expensive components of belt conveyors. Poor belt alignment leads to excessive wear and inevitably to early replacement, resulting in high replacement costs and short service lives. Minimum wear – long service life The new PrimeTracker works unlike conventional belt alignment systems. Due to its unique design, it acts like a standard conveyor belt roller when the belt runs smoothly and only intervenes when the belt leaves its optimum position. The PrimeTracker responds before the guide roller tilts horizontally. As soon as the conveyor belt runs off-centre, the PrimeTracker corrects the movement with small forces and very low friction, thus preventing unnecessary wear. Effect of the PrimeTracker in case of belt misalignement The specially developed maintenance-free mounting of the PrimeTracker allows a change of the rotating roller‘s axis position in all directions. The rubberized cylinder body can tilt and swing. With soft pressure, it provides continuous guidance over the complete contact surface. The PrimeTracker is physically designed to detect even the slightest deviation in the belt run from the optimum line and to react with the
07.12.2020  |  1066x  |  Product news  |   | 
Conveyor belt skirting AirScrape get more and more friends The last GlobalGypsum Conference confirmed the high interest in the new conveyor skirting system
Conveyor belt skirting AirScrape get more and more friends
The last GlobalGypsum Conference confirmed the high interest in the new conveyor skirting system The new conveyor skirting system is getting more and more friends, worldwide and in all industries. The next GlobalCement visual will be beginning of December. If you have interest, please send us a short mail and you will get automatically a link to the registration page for the next GleobalCement.
22.11.2020  |  1427x  |  Press release  |   | 
Wye Line Diverters Handling Plastic Pellets for Automotive
Wye Line Diverters Handling Plastic Pellets for Automotive
An automotive industry plastics manufacturer contacted Vortex Global because they needed to replace a cumbersome hose manifold system with an automated process. The system was used to convey different grades and colors of plastic pellets from individual storage bins into an extruder, where the pellets were heated and molded into automotive parts. For this plastics manufacturer, the process of conveying plastic pellets was a production and safety ordeal. The hoses took space on the production floor, employees had to be aware of the constant relocation of the hoses, and production slowed as hoses were relocated to different source bins. On occasion, hoses were connected to the wrong source bin, causing the extruded parts to be made with the improper materials – therefore creating waste. The company had installed Vortex Wye Line Diverters in other parts of their facility earlier with great success. They were pleased with the valves’ performance and the lifecycle
16.11.2020  |  1362x  |  Product news  |   | 
Peru first AirScrape test The new conveyor belt skirting, the AirScrape runs on high performance 12 months now. The mine confirmed and appreciate, the high cost savings and the clean dust free working places at the conveyor belts.
Peru first AirScrape test
The new conveyor belt skirting, the AirScrape runs on high performance 12 months now. The mine confirmed and appreciate, the high cost savings and the clean dust free working places at the conveyor belts. A new user, operator of the processing plant of a large mine, had to readjust the conventional conveyor skirting at belt transfer points every 2 weeks and replace them completely every 4 months, causing enormous downtimes and costs of the equivalent of € 240 000 each. The plant managers hoped to stretch these cycles. They discovered the AirScrape at the Perumin 2019 trade fair and decided to test the conveyor skirting at one of the most critical transfers at the highest point of the plant. From there, dust not only trickled into the entire plant, but was also carried by the wind in the direction of the lower situated nearby village. After the test installation of the AirScrape of 10 m per side of the conveyor, the effectiveness was immediately apparent. Only 2 weeks later, the main manager approved a large AirScrape order. In the meantime, elements for 150 m (both sides) have been purchased to convert a total of 5 belt transfers to AirScrape. Furthermore, there are
13.11.2020  |  1223x  |  Product news  |   | 
The gentle processing of highly volatile oils by fluid bed technology Sensitive raw materials, especially those that are volatile or of natural origin, require particularly gentle process conditions.
The gentle processing of highly volatile oils by fluid bed technology
Sensitive raw materials, especially those that are volatile or of natural origin, require particularly gentle process conditions. Spray granulation, spray coating and (micro)encapsulation procedures have proven to be methods of choice, as they enable high yields, low temperatures and bespoke properties. When it comes to cosmetics, product development often focuses on proven, multifunctional ingredients. This is in addition to the ongoing demand for natural ingredients, as consumers increasingly look for effective cosmetic products that neither harm their health nor the environment. Glatt Ingenieurtechnik, the German expert in particle design, process development and plant engineering, offers unique particle processing solutions based on fluidised bed and spouted bed technologies for essential oils, collagens, active substances, stabilizers, enzymes, fragrances, aromas, vitamins and controlled release products, all of which can be optimally produced, protected and refined. Efficient fluidised and spouted bed processes Unique flow, mechanical and thermodynamic properties make fluid bed technology
03.11.2020  |  644x  |  Specialist article  | 
New PrimeTracker keeps you belt run correctly It looks the same but works totally different. 360 degrees movable, totally free means for you ...
New PrimeTracker keeps you belt run correctly
It looks the same but works totally different. 360 degrees movable, totally free means for you ... The new tracking system is now available. The PrimeTracker works directly against all kinds of mistracking, brings your conveyor belts directly back to the middle. Check the PrimeTracker diameter and you will easily see and understand the difference to the other tracking system and to the advantages of the PrimeTracker. More infos? Please let us know.
01.11.2020  |  1255x  |  Press release  | 
Elevator Re-Design from Grain to
Elevator Re-Design from Grain to "Green Malt"
Brewing & Malting: Elevator Design Improvements Challenge To utilise an existing Grain Elevator to transport “green malt”. After installation it was apparent the elevator was problematic and not functioning as expected. The installed buckets were CCS127 buckets, which replaced the obsolete J127 HDP buckets which were originally installed. After some discussion with 4B, the prognosis was the pulley may be too small for the projection of the CCS12x7 bucket. This was expected to be cured by installing CCS 12x6 but the problem still persisted although not as bad. SOLUTION After a site visit to inspect what they actually had, it was apparent the elevator was set up to transport free flowing grain. This setup was incorrect for the handling of green malt, which by nature is wet and sticky and does not flow well. The conclusion was the product was not fully discharging into the outlet but was in fact falling down the return leg back into the boot. 4B recommended two minor alterations to solve this problem. Modify
14.10.2020  |  1853x  |  Product news  | 
AirScrape, the conveyor skirting comparison No wear, no maintenance for months/years
AirScrape, the conveyor skirting comparison
No wear, no maintenance for months/years The mining industry in Peru relies entirely on the AirScrape. There is no more wear and tear, dust or spillage. Employees can concentrate on the essentials in a clean environment. See attached video before and after, Health and Safety. In addition, the downtimes could be reduced dramatically. In the past, the conveyor belt skirting had to be readjusted or replaced every 14 days. Thanks to AirScrape, this maintenance work is no longer necessary and the system can run through. It also works for all other bulk handling industries like Cement, Gypsum, Lime, Glass and more. For more infos, send us a mail.
13.10.2020  |  1710x  |  Product news  |   | 
Titan lined diverter handling dolomitic limestone rock
Titan lined diverter handling dolomitic limestone rock
This hydraulically actuated Vortex Titan-Lined Diverter features a 2690mm x 405mm transition that feeds dolomitic limestone rock to a 1220 mm x 405 mm diverter inlet and two 915mm x 405 mm outlets. Material contact areas (3 sides) contain replaceable abrasion-resistant steel liners (400 BHN). An “A-style” AR blade covers and protects the blade shaft from wear and abrasion. Two inspection ports are mounted on the inlet transition and the diverter internals are accessible through a removable cover on the actuator side. The diverter will be mounted, tilted at a 37-degree slope (actuator side up), to become part of a chute. Lifting lugs have been added to assist with the installation.
12.10.2020  |  1343x  |  Product news  | 
Outside-In-Prozess vom Anlagenbauer
Outside-In-Prozess vom Anlagenbauer

This item is only available in German
07.10.2020  |  1214x  |  Specialist article  | 
Vortex Roller Gate Provides Solution For UK Animal Bedding Production Facility
Vortex Roller Gate Provides Solution
For UK Animal Bedding Production Facility Arden Wood Shavings located in Solihull, England, is one of the leading suppliers of wood shavings and sawdust bedding to the poultry, equestrian, dairy and animal bedding sectors. Application: The Client’s particular process was using the valves to isolate conveyors in their fully automated production facility. Challenges: The Client had experienced problems with the existing valve located on the outlet of their inclined conveyor. The existing valve leaked material and was difficult to maintain. The new Roller Gate valve had to be specifically designed to match the opening, bolt hole pattern and overall height of the existing valve to minimize plant downtime during installation. It included an oversized pneumatic cylinder to assist in closing through material flow. As the valve was installed at an angle and would see more material flow on one side, the blade guide rollers were upgraded to be a more durable stainless-steel construction. Vortex was able to achieve
15.09.2020  |  1916x  |  Product news  |   | 
Extend your multiphysics simulations with Rocky DEM and Ansys integration Analyse complex problems from a new perspective
Extend your multiphysics simulations with Rocky DEM and Ansys integration
Analyse complex problems from a new perspective Rocky DEM and Ansys Rocky DEM is fully integrated with the Ansys Workbench suite of products, allowing engineers to perform various coupled analyses of particle simulation together with other physics such as structural, fluids, and thermal modeling. Making use of this integration enables you to reduce the costs associated with design iteration. By linking together Rocky with other Ansys software, Workbench saves you time by automatically transferring data between the programs and automatically updating linked projects based upon the results calculated. Being fully integrated within Ansys Workbench allows Rocky to: - Maximize the design of your geometry components by using Ansys SpaceClaim. - Parameterize simulation and setup components by using Ansys DesignXplorer. - Conduct FEA analysis of particle forces acting upon geometry components by using Ansys Mechanical. - Study how fluid forces and convective heat exchange affect particle flow and temperature by using Ansys
20.08.2020  |  2005x  |  Product news  |   | 
Jürgen Opdenhoff - Digitalisierung in der Schüttgutindustrie
Jürgen Opdenhoff - Digitalisierung in der Schüttgutindustrie

This item is only available in German
24.07.2020  |  1615x  |  Press release  |   | 
MOLOScode patent for 30 years Patent for the development of intelligent hose couplings
MOLOScode patent for 30 years
Patent for the development of intelligent hose couplings Whether a hose is connected to the coupling station or not, is an important information for the PLC. But it would be even better to know, which hose is connected where. In order to get this information, it is necessary to equip the hose couplings with “intelligence”. For this Wolfgang Hageleit, founder and managing director of MOLLET-Füllstandtechnik GmbH had an idea and developed a solution, that was patented already 30 years ago on August 9, 1990. He pushed forward although this innovation and developed it with his team to the marketability. He solved existing problems of the customers and built up a new product line, that contributes an essential part to the success of MOLLET. This is the intelligent coupling-system MOLOScode that makes an incorrect connection of flexible and rigid pipelines impossible. Each hose gets a transponder and any pipe connection is equipped with a reading device that informs the PLC about the hose that has been connected directly
23.07.2020  |  2211x  |  Press release  | 
Plasser & Theurer simuliert Gleisschotter mit Rocky DEM
Plasser & Theurer simuliert Gleisschotter mit Rocky DEM

This item is only available in German
18.05.2020  |  2499x  |  Specialist article  | 
GKM extends KTS-VS2 series of high capacity screening machines Ideal solution for little feed quantities or small batches
GKM extends KTS-VS2 series of high capacity screening machines
Ideal solution for little feed quantities or small batches Due to the sustained high demand for the screening machine type KTS-VS2, the models KTS-VS2 600 and KTS-VS2 800 complement the GKM`s established range and KTS-VS2 series models. These additional machine sizes provide the ideal solution for little feed quantities or small batches. The KTS-VS2 Control Screening Machine removes oversize or foreign contaminants from your final product. It is the optimum solution for control- and safety screening of powders and liquids. The KTS-VS2 is easy to integrate into production lines and ensures high throughput rates via central product in- and outlet. The KTS-VS2 is extremely flexible and is outstandingly suitable for meeting sector-specific requirements and the demands. The KTS-VS2 series are conceived for the most demanding applications in the pharma & food sectors like the screening of milk powder. Another typical application is the control screening of powder coatings where quick disassembly and easy cleaning is extremely important.
08.04.2020  |  2512x  |  Product news  | 
New agent TBMA in Germany
New agent TBMA in Germany
TBMA Europe BV has found the perfect partner in André Junker Industrievertretungen as representation in the Northern German market. André Junker is the third generation in his family active in the German bulk solids industry. He has already earned his spurs in this industry and within his company there is more than 30 years of experience with the application and delivery of rotary valves and diverter valves. Bart Houben, Managing Director of TBMA Europe: “TBMA has been active in Germany for quite a while, but we realized that in order to grow we need a partner that knows and can proactively develop the market.” “We are very happy with this collaboration and are ready to boost the TBMA products on the German market. TBMA has been supplying high-end rotary drop-through and blow-through valves for more than 50 years and also has an interesting range of diverter valves. In addition, at TBMA there is a lot of technical knowledge and process know-how that we can
27.02.2020  |  3096x  |  Press release  | 
Application-specific Ploughshare® mixer for battery masses Sophisticated in every detail
Application-specific Ploughshare® mixer for battery masses
Sophisticated in every detail In the production of lithium batteries extremely high quality demands are placed on the preparation of the required raw materials – even to the limits of technical feasibility. For example, the contamination of cathode masses by foreign ions – in particular iron – must be avoided at all costs. Lödige has addressed this challenging process-technical task with a special version of the proven Ploughshare® mixer. The mixing drum has a ceramic lining, but due to their more complex geometry a different covering was required for the mixing elements. Together with the mixer shaft and choppers, they were provided with a thin, but extremely tough ceramic coating. The coatings can be adjusted to the respective application. Standard coating materials are based on aluminium oxide or tungsten carbide. In any event, these wear-resistant, hard coatings are designed for long-term operation. Because the battery masses contain toxic and carcinogenic components such as cobalt,
20.02.2020  |  2947x  |  Product news  | 
Partikelsimulation im Maschinen- und Anlagenbau
Partikelsimulation im Maschinen- und Anlagenbau

This item is only available in German
17.02.2020  |  1792x  |  Product description  |   | 
UWT GmbH sucht Entwicklungsingenieur (m/w/d)
UWT GmbH sucht Entwicklungsingenieur (m/w/d)

This item is only available in German
06.02.2020  |  2242x  |  Job vacancy  |   | 
FILLED
Leading-edge technology for bulk solids As a new era in bulk goods dawns, find inspiration at trade shows Solids & Recycling-Technik
Leading-edge technology for bulk solids
As a new era in bulk goods dawns, find inspiration at trade shows Solids & Recycling-Technik (Dortmund) The demands placed on technologies for processing modern bulk solids are constantly rising. Today’s strategies no longer focus strictly on increases in efficiency and the careful consumption of energy and resources: Given the ubiquitous shortage of skilled workers, it has become critical to fortify processes in order to protect people, the environment and production plants. On 1 & 2 April 2020, the trade show Solids & Recycling-Technik Dortmund will address these and other challenges faced by industry – both today and tomorrow. Throughout the exhibition and in technical lectures, numerous experts will engage the visitors to encourage the exchange of knowledge and spark ideas for tackling a demanding future. The primary issues facing decision-makers in the bulk materials industry are: how to position oneself efficiently and sustainably on the market, and how to defend and maintain that position in future. Against a background of growing shortages in skilled
05.02.2020  |  2782x  |  Press release  | 
UWT GmbH sucht Bilanzbuchhalter / Steuerfachangestellter (m/w/d)
UWT GmbH sucht Bilanzbuchhalter / Steuerfachangestellter (m/w/d)

This item is only available in German
29.01.2020  |  2431x  |  Job vacancy  |   | 
FILLED
Shaken or stirred? The optimization of mixing processes with the simulation software Rocky dem
Shaken or stirred?
The optimization of mixing processes with the simulation software Rocky dem Traditionally, the quality assessment of mixing processes in many companies is still based on time-consuming test series, which, especially in batch processes, provide insufficient data on the time course and the overall spatial distribution of the mixing quality. Liebherr Mischtechnik reports in our Cadfem journal article (see link on the right) how the use of particle simulation with ROCKY-DEM helps to optimise process parameters - to improve energy efficiency and compound quality as well as to save costs. With ROCKY-DEM, input parameters such as particle sizes and size ratios as well as the speed and residence time of the product could be varied quickly. An evaluation of the mixing quality was now possible over the entire mixing trough and at any time. Statements about required torques and optimum speeds can also be made in this way. In addition, statements on new developments or design changes can be made by means of simulation without the need for cost-intensive
23.01.2020  |  3573x  |  Press release  | 
UWT GmbH sucht Mechatroniker / Elektroniker (m/w/d)
UWT GmbH sucht Mechatroniker / Elektroniker (m/w/d)

This item is only available in German
13.01.2020  |  2770x  |  Job vacancy  |   | 
FILLED
Silomanagement für Getreidemühlen und ihre Kunden
Silomanagement für Getreidemühlen und ihre Kunden

This item is only available in German
13.01.2020  |  1807x  |  Product news  | 
Safe loading of bulk goods in explosive atmosphere MOLOSroto rotary paddle level indicators approved for zone 20 offer new opportunities
Safe loading of bulk goods in explosive atmosphere
MOLOSroto rotary paddle level indicators approved for zone 20 offer new opportunities There are principally two kinds of loading bellows. Beside the loading bellows for closed loading of dusty bulk solids into trucks or wagons with filling holes there are systems for the open loading of bulk solids onto trucks, wagons, ships or heaps. During the open loading of potentially explosive bulk solids it could happen, that the complete MOLOSroto sensor is located in zone 20. One example are large loading systems for ships with a loading capacity of 2.000 m3/h and a height difference up to 50 m. In this loading bellows three MOLOSroto level indicators are required for the control of the discharge header and they are mounted completely in zone 20. The rotary paddle level indicator MOLOSroto DF21 approved for zone 20 offers the designers of loading systems new opportunities. With this approval the complete sensor including control unit can be mounted in potentially explosive atmospheres of zone 20.
09.01.2020  |  2572x  |  Product description  | 
More than 20 nations come together in the beautiful Allgäu r International Autumn Training 2019 at UWT in Betzigau
More than 20 nations come together in the beautiful Allgäu r
International Autumn Training 2019 at UWT in Betzigau 20 Nations visits every year the UWT Headquarter, UWT innovative Solutions - Training for the distributors, Point level measurement is our target, Markus Unglert - gives support, Level Measurement in different Versions, UWT Sales Manager explaining the solutions, Long-standing partners welcome Andrew Hamilton UWT-UK, Markus Schalk and Guoyan Zhang-Mailänder accompany through the event, Armin Waibel and Aiman Gayed from UWT with partners, Markus Unglert (PM-UWT) and Don Crader (UWT LLC. USA), Julian Bareth and Jan from DANOVA-DK, leave no questions unanswered, Work hard - Play hard is the motto, Happy get-together in the evening, A warming cup by the fire - a successful start in a great evening, Delicacies were served, Business partners often become friends, Alfons Kennerknecht always provides for a great atmosphere, Obligatory Bavarian party is always a pleasure, Alexandra and Egor Woloschin from UWT keep everything within bounds
11.12.2019  |  2466x  |  Photo reportage  | 
UWT sucht Lagermitarbeiter (m/w/d)
UWT sucht Lagermitarbeiter (m/w/d)

This item is only available in German
09.12.2019  |  3074x  |  Job vacancy  |   | 
FILLED
UWT sucht Mechatroniker / Elektroniker (m/w/d)
UWT sucht Mechatroniker / Elektroniker (m/w/d)

This item is only available in German
09.12.2019  |  2178x  |  Job vacancy  | 
FILLED
Drei ereignisreiche Tage auf der SPS in Nürnberg
Drei ereignisreiche Tage auf der SPS in Nürnberg
Team UWT bedankt sich für Ihren Besuch, Messestand UWT und Labom, Kevin Walter und Fatima Daz von UWT begrüssen Sie am Stand, Thomas Schäfer mit Fatima Daz von UWT, Eine kleine Stärkung hilft über den Tag, Gemeinschaftsstand UWT mit Labom - super Truppe, Innovativ und informativ
09.12.2019  |  1284x  |  Photo reportage  | 
Recycling und Schüttgut-Technologien für mehr Nachhaltigkeit
Recycling und Schüttgut-Technologien für mehr Nachhaltigkeit

This item is only available in German
04.12.2019  |  1787x  |  Product news  | 
Bestimmung Schüttgewicht und Schüttdichte im Schüttgutlabor
Bestimmung Schüttgewicht und Schüttdichte im Schüttgutlabor

This item is only available in German
06.11.2019  |  2722x  |  Press release  | 
Special parts for stainless steel pipe systems for pneumatic conveying systems
Special parts for stainless steel pipe systems
for pneumatic conveying systems extension bends: stainless steel (also aluminium), special bends according to your drawing, sample or sketch, stud with flange, branch pipe with flange, branch pipe with parallel outlets, branch pipe with reduced outlet, stud end, fork, T-piece with extended outlet, extension bends, angle piece
15.10.2019  |  2473x  |  Photo reportage  | 
MOLOSwave – reliable level measurement Level measurement devices of the MOLOSwave series also suitable for explosive bulk goods
MOLOSwave – reliable level measurement
Level measurement devices of the MOLOSwave series also suitable for explosive bulk goods MOLLET Füllstandtechnik offers with the MOLOSwave series the opportunity, to measure the filling level in potentially explosive bulk goods as well. Reliable measuring signals and a very attractive price-performance-ratio make the MWF21 with rod probe and the MWF27 with rope probe extremely interesting for more and more customers worldwide. High accuracy due to four wire technology and independence of product characteristics as well as very good insensitiveness against dust, build up and condensate are further advantages of the MOLOSwave series. The radar measuring devices of the MOLOSwave series are based on the Time Domain Reflectometry (TDR) principle. In doing so high frequency microwave pulses with low energy are created that are coupled onto the probe and guided along this probe to the bulk goods. The product surface partly reflects these pulses. The electronic detects the reflected pulses and calculates the actual filling level from the time difference of the
10.10.2019  |  3340x  |  Product description  |   | 
Anniversary-edition Solids and Recycling-Technik Dortmund's trade show attractions in 2020
Anniversary-edition Solids and Recycling-Technik
Dortmund's trade show attractions in 2020 (Dortmund) Solids to celebrate its 10th anniversary. For its decadal edition, the trade show Solids (previously Schüttgut) will once again take place alongside Recycling-Technik. On 1 & 2 April 2020 in Dortmund, the trade show duo will once again become a high-calibre platform for all aspects of bulk materials and recycling technologies. At the heart of the Ruhr metropolis, trade visitors can obtain comprehensive information and swap ideas about the latest trends and solutions for the industry. In addition to established specialist congresses, in-depth expert lectures and presentations will enhance the range of information on offer. The show organiser, Easyfairs, has once again employed its successful trade show concept. Competent premium partners further strengthen the attractiveness of the industry event. "With Dortmund as its location, the trade show duo has established itself auspiciously in the heart of the Rhine-Ruhr metropolitan region, Germany's core industrial
20.09.2019  |  4434x  |  Press release  | 
Control of material flow with MOLOSflow FSM Timely recognition of flow disturbances with microwave technology
Control of material flow with MOLOSflow FSM
Timely recognition of flow disturbances with microwave technology In many processes with e.g. pneumatic conveying of bulk solids flow controller are used, that monitor free of contact the flow of bulk solids in pipelines. Mollet füllstandtechnik has enhanced the offer in the product sector Bulk Solids Handling with the MOLOSflow FSM and closed consequently an essential gap in the product portfolio. With the MOLOSflow FSM flow disturbances, congestions, lack of bulk solids during conveying of powders, dusts, pellets and granulates are timely and reliably recognized. Thereby, cost and problems that arise due to a plant shutdown can be avoided. The variable adjustment of sensitivity, signal damping, switching hysteresis and filter function allow an optimal adaption to any kind of application. Due to the contact-less flow control the use in aggressive media is possible as well. Maintenance-free continuous operation, easy installation and parametrization at the device are additional advantages of the device. The measuring device operates
13.09.2019  |  3013x  |  Product news  | 
ATEX approval for MOLOSbob level measurement devices Continuous level measurement in potentially explosive atmospheres
ATEX approval for MOLOSbob level measurement devices
Continuous level measurement in potentially explosive atmospheres In storage bins of food, like sugar, grain or flour the filling levels are mostly automatically detected. As these bulk goods generate a potentially explosive atmosphere, only measuring devices may be used for level measurement applications, that are in compliance with the actual valid European ATEX directives. MOLLET Füllstandtechnik offers you the Yo-Yo measuring system MOLOSbob LF20 for continuous level measurement with the ATEX approval needed for these kinds of application. The compact and robust measuring device with a tape made of stainless steel provides precise measurement results up to a silo height of 42 m independent of bulk goods characteristics like permittivity, dust, moisture, conductivity or grain size. Easiest installation and a onetime parameterization, that does not have to be adjusted due to changed processing conditions, are further advantages of this technology.
09.08.2019  |  2809x  |  Product description  | 
Stainless steel pipe systems - direct from the manufacturer Pipe bends, Pipe Couplings, Branch Parts, Reducers, Coupling Stations
Stainless steel pipe systems - direct from the manufacturer
Pipe bends, Pipe Couplings, Branch Parts, Reducers, Coupling Stations HS Umformtechnik produces with state-of-the-art machinery, in total: * 9 CNC mandrel bending machines * 2 trumpf tube lasers * 1 welding robot * 1 cutting robot Production according to the highest quality requirements of: * Standard dimensions in large numbers - as well as: * Custom made according to your drawing / sample eg. This means for your purchase: - fast delivery, from stock - at a good price-performance ratio - no minimum order quantity Stainless steel pipe bends - Material: AISI 304 / 1.4301 - also in highly wear-resistant version - Diameter 38.0 mm - 206.0 mm - Radii: 75 mm - 1500 mm Pipe couplings type DVK 6 - for suction conveying - Diameter: 33.7 mm - 110.0 mm Pipe Couplings Type DVK-HD® - for pressure conveying - Diameter: 60.3 mm - 206.0 mm Stainless steel branch pipes, 30 °, 45 °, 90 ° - Material: AISI 304 / 1.4301 - also in highly wear-resistant version - Diameter: 38.0 mm - 206.0 mm Stainless steel reducers - Material: AISI 304 / 1.4301 -
18.06.2019  |  4312x  |  Product description  |   | 
MOLOS-vibro for all bulk solids Single rod level indicator for potentially explosive atmospheres in ex zones 0 and 1
MOLOS-vibro for all bulk solids
Single rod level indicator for potentially explosive atmospheres in ex zones 0 and 1 The vibration rod level indicators of the MOLOSvibro series VF1 and VF6 monitor the filling level of bulk solids even under extreme process conditions. These devices get now the approval for areas with the ATEX classification zone 0/1. This is the most dangerous potentially explosive atmosphere as a mixture of air and flammable gases. The maintenance free level indicators of the MOLOSvibro series are suitable for level control applications with dusty, powdery, or fine granulated bulk material although with low densities. These measuring devices are the preferred choice to indicate full and empty level and guarantee high reliability as well as a long durability even in hard and extreme applications. Due to the Rhombus shape of the vibration rod and a reinforced membrane the MOLOSvibro measuring devices are much more robust than conventional single rod level switches.
06.06.2019  |  3226x  |  Product news  | 
Coupling stations / Material distributors manufactured to your individual specifications
Coupling stations / Material distributors
manufactured to your individual specifications Coupling station - manufactured by HS Umformtechnik GmbH, stainless steel bends, branch parts, pipes with vacuum coplings DVK 6, Highly wear-resistant coupling stations produced by HS Umformtechnik GmbH
14.05.2019  |  3447x  |  Photo reportage  | 
Stainless steel reducers material no. AISI 304 - ex stock with outer diameters from 38.0 mm till 168.3 mm
Stainless steel reducers material no. AISI 304 - ex stock
with outer diameters from 38.0 mm till 168.3 mm Stainless steel reducers from HS Umformtechnik - ex stock
15.04.2019  |  3675x  |  Photo reportage  | 
DVK 6 - pipe couplings for suction conveying (light version)
DVK 6 - pipe couplings
for suction conveying (light version) for outer pipe diameters from 33.7 mm to 110.0 mm, Version: DVK 6 - Quick closure, length 150 mm, Version: DVK 6 - Quick closure, length 100 mm, pipe coupling for connecting glass pipe bends with stainless steel pipes
21.03.2019  |  4354x  |  Photo reportage  | 
Webinar-Tipp: Partikelsimulation in der Pharma-Industrie
Webinar-Tipp: Partikelsimulation in der Pharma-Industrie

This item is only available in German
08.07.2018  |  4494x  |  Press release  |   | 
Protection Plus with innovative corrosion protection Capacitive RF probe with full coating protection
Protection Plus with innovative corrosion protection
Capacitive RF probe with full coating protection In power plants, the demands made on the fill level sensors can be very high due to the fact that the sensors come into contact with aggressive media such as sulphur oxides, heavy metals or even acids. Where limit switches are used for dust detection in flue gas cleaning, they need to be robust enough in order to deliver reliable and consistent performance. Often maintenance costs or replacement of these sensors can be very high due to their quality not being adequate to meet the demands and so they achieve only a short operating life. This is particularly evident in measurement tasks in flue gas cleaning within waste incineration plants. Longer service life due to increased corrosion resistance UWT has further developed the RFnivo® 3100 capacitive level limit switch for this type of measurement task in the dust extraction of flue gases so that it meets and withstands the demanding conditions. All process-contacting parts of the sensor have been designed to be
08.11.2016  |  10285x  |  Product news  | 
PORTALS
BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising