Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

       

Categories

Contribute
Controllers
Select a category
Controllers
Controllers
Displays  
Search

Companies

ACO Automation Components; Moisture Measurement, FeuchtemessungB+L Industrial Measurements GmbH
GKM Siebtechnik GmbHPenko Engineering B.V.
SCAIME S.A.S
Do you want to list your company here?  Add company

Posts

New Multichannel Feeding and Dosing Controller from GERICKE The GERICKE GUC-F Controller is a solution for all feeding and weighing applications in powder handling applications meeting the most demanding process requirements.
New Multichannel Feeding and Dosing Controller from GERICKE
The GERICKE GUC-F Controller is a solution for all feeding and weighing applications in powder handling applications meeting the most demanding process requirements. Accurate feeding and dosing are fundamental in the production of high-quality products in many industries. The new GERICKE GUC-F Controller is a control solution for all feeding and weighing applications in powder handling applications meeting the most demanding process requirements. Using a flexible and modular design concept it can be integrated into any automation environment. Control of four feeders The new GERICKE GUC-F Controller can be used for dosing, feeding and weighing in all types of gravimetric and volumetric feeding applications in continuous or batch production modes. A single unit can control up to four feeders making the installation very cost efficient. With the support of analog and digital load cells and the integrated control of refilling and other automation tasks the GUC-F Controller is capable to manage any combination of feeding and dosing equipment, and even control feeding processes as a stand-alone unit. With ultrafast processing and
13.01.2022  |  2138x  |  Product news  | 
Hygienic application for ACO moisture measuring systems ACO moisture measuring instruments: food industry and pharma industry
Hygienic application for ACO moisture measuring systems
ACO moisture measuring instruments: food industry and pharma industry ACO-Automation Components shows a hygienic solution for using their moisture measurement systems in the food and pharma industry. An ACO moisture measuring sensor determines the water content/residual moisture of bulk material through a food approval plastic plate. This installation kit has been specially developed for measuring bulk goods in screw conveyors. This method prevents a direct contact between the moisture measurement sensor and the bulk solids. https://www.acoweb.de/en/produkte
30.09.2016  |  18429x  |  Product news  | 
Controlling of the Gypsum production at E.ON “MPP3”  based on a moisture measuring system from ACO
Controlling of the Gypsum production at E.ON “MPP3”
based on a moisture measuring system from ACO E.ON „MPP3“ coal fired power plant in Rotterdam-Maasvlakte The “MPP3” is the most modern and biggest hard coal fired power plant with the notable gross power rating of net 1070 MW and a net efficiency of over 46%. The “MPP3” wants to reduce the effects on the environment as much as possible. One point to reach an environmental friendly process is the optimisation of the exhaust-desulphurisation unit. The desulphurisation is made by a wet flue gas cleaning unit controlled by a moisture measurement. This flue gas desulphurisation (FGD) is far more effective than in other traditional coal fired power plants. Beyond the “MPP3” can reach a biomass-combustion up to 30%. Of course the district heating is used from the adjacent companies. General description of the process The desulphurisation is based on burnt lime (CaO) thereby the end product gypsum (calciumsulfad-dihydrat) arises. For the analysis of the produced gypsum there is an in-house
12.03.2015  |  29564x  |  Product news  |   | 
PLICSLED – The new switching status display module for point
PLICSLED – The new switching status display module for point
With the new display module PLICSLED, the switching status of a sensor can be read from afar, even in strong sunlight. The module is compatible with all sensors of the plics® family with relay output: VEGASWING series 60, VEGAVIB series 60, VEGAWAVE series 60, VEGACAP series 60 and VEGAMIP series 60. Since external wiring is unnecessary, the time needed for installation is reduced to a minimum. Power is supplied via the relay electronics. The second relay output is used to control the switching status display. Depending on the module version, the switching status is displayed in the colour combination red-green or yellow-green. PLICSLED is installed directly inside the plics® sensor housing, which gives it a high degree of protection from dust and water ingress.
17.11.2014  |  20849x  |  Product news  | 
VWO developed a new series of control cabinet for filling and dosing proces These cabinets allow machine builders to create new or existing systems much easier.
VWO developed a new series of control cabinet for filling and dosing proces
These cabinets allow machine builders to create new or existing systems much easier. These control cabinet for controlling the various filling and dosing processes are available as a component and suitable for controlling; • Vibrating convayors (by Frequency controller) • Feeders (via Motor drives controllers ) • Dosage valves (using Switch Contacts) With the controller you get a two speed filling process. It starts with a coarse filling at high speed and ends with a fine filling at low speed to achieve the desired accuracy. For a simple filling and dosing process, no further controls are required. These control panels are based on the Flintec FT-13 weighing controller. This controller is standard programmed with 7 filling modes. These are easily adjustable by changing parameters and used in filling and emptying processes. The dosing can be done in net or gross mode. Optionally an additional port can be installed for communication over an industrial bus (eg Profibus, Ethernet, etc.) with external systems Components of known brands
30.08.2010  |  5714x  |  Product news  | 
Weighing with PLC or PC
New: METTLER TOLEDO IND130 Now it is possible to convert weighingsignals from loadcells of almost any construction (silos, hoppers, etc) to any PLC or PC with RS232 or Profibus or AB/RIO interface The METTLER TOLEDO IND130 gives you new possibilities
01.06.2005  |  5146x  |  Press release
Do you have an item for this page?  Contribute
PORTALS
BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising
FOLLOW US
Linked